Manganese sulfate monohydrate or anhydrous: choosing the form
Manganese sulfate is supplied as the monohydrate, the form specified here, and as the anhydrous salt. The monohydrate is the standard supplement grade: it is stable at ambient conditions, free-flowing and 32.5% manganese by mass. The anhydrous salt is 36.4% manganese and takes up moisture readily, so it is chosen when the extra concentration matters and the plant can control water. A granulated monohydrate is a physical grade of the same chemistry, not a different salt.
The hydrate is the specification: the monohydrate and the anhydrous salt differ by about 12% in mass per unit of manganese, and the label has to name the form that was weighed.
Why manganese sulfate comes in more than one form
Manganese sulfate crystallises with water. The monohydrate carries one water molecule per manganese ion, and that water is part of the crystal, not a residue on the surface. The anhydrous salt has no water in the crystal. Both are manganese(II) sulfate, both dissolve in water and both give the pale pink colour of the manganese(II) ion, but they are different specification items with different CAS numbers, molecular weights and manganese figures.
The monohydrate is the form that is stable at ordinary temperature and humidity. The anhydrous salt is hygroscopic: left open, it takes water back and moves toward the hydrate, which changes the mass and the manganese figure per gram. That is why the hydrate is the practical default for a supplement plant and the anhydrous salt is a specialist purchase. The third option is not a different chemistry at all: a granulated monohydrate is the same salt with a coarser particle and better flow, specified by particle size and bulk density as well as by assay.
The forms side by side
| Property | Monohydrate | Anhydrous | Granulated monohydrate |
|---|---|---|---|
| Formula | MnSO4·H2O | MnSO4 | MnSO4·H2O |
| CAS number | 10034-96-5 | 7785-87-7 | 10034-96-5 |
| Molecular weight | 169.01 | 151.00 | 169.01 |
| Manganese (theoretical) | 32.5% | 36.4% | 32.5% |
| Water (bound) | 10.66% | None | 10.66% |
| Appearance | Pale pink powder | Pale pink to off-white | Coarser pink granules |
| Handling | Stable; keep sealed and dry | Hygroscopic; keep sealed | Stable; free-flowing |
| Label name | Manganese sulfate monohydrate | Manganese sulfate, anhydrous | Manganese sulfate monohydrate |
| Typical use | Standard supplement grade | Concentrate where water is unwanted | Blends where dust matters |
The difference in manganese is 3.9 percentage points, which is about 12% more mass for the same manganese when you use the monohydrate. That is the whole commercial difference, and it is enough to move the fill weight, the capsule size and the blend. The granulated grade repeats the monohydrate chemistry; only the particle size and flow differ.
Solubility, colour and handling
Both forms dissolve freely in water, and both solutions are acidic. The monohydrate is a pale pink, free-flowing powder at 40 mesh; the colour comes from the manganese(II) ion and is not a purity measure. The anhydrous salt is paler, sometimes close to white, and its powder can be finer and more dusty. The monohydrate is not a coated or diluted material; it is the same salt with its water of crystallisation. Granulation changes the particle size and the flow, not the assay.
A granulated monohydrate is useful where dust and segregation matter in a blend, but it is specified by particle size and bulk density as well as by assay. The solution is acidic, so check the material of construction before a long hold. The powder should stay in a sealed pack; the monohydrate is less hygroscopic than the anhydrous salt but it is not a desiccant, and free moisture can still push the water result above the 12.0% limit.
Dose arithmetic and the fill
The fill weight follows the manganese figure, not the salt name. If a label declares 10 mg of manganese, the pure monohydrate needed is 10 ÷ 0.325 = 30.8 mg; at a 98.0% assay, 31.4 mg. The anhydrous salt needs 10 ÷ 0.364 = 27.5 mg, or 28.1 mg at the same assay. The difference is 3.3 mg per serving, about 12%, and it compounds across a batch. At a 2 mg declaration the weights are 6.2 mg and 5.5 mg, small enough that blend uniformity becomes the harder problem: a direct blend of a few milligrams into a 500 mg capsule is difficult, so a diluted premix or a granulated carrier may be needed.
The capsule shell and the excipients take the rest of the fill. Do not size the fill on the salt weight if the label declares elemental manganese; convert first, then add the excipient. The same arithmetic applies to a tablet or a stick pack, and the assay and water figures for the lot should be the ones used. A lot at the top of the water range carries less monohydrate per gram, so the fill moves again within the specification.
What to write into the specification
- “Manganese sulfate monohydrate, CAS 10034-96-5, MnSO4·H2O.”
- “Assay ≥98.0% by complexometric titration; state the basis.”
- “Manganese 31.5–33.0% by titration; state the basis.”
- “Water 10.0–12.0% by Karl Fischer.”
- “Identification by IR and titration.”
- “Particle size ≥95% through 40 mesh; granulated on request.”
- “Heavy metals and microbiology as listed on the catalog specification.”
- “Destination market and hydrate confirmed before the order.”
If the brief calls for the anhydrous salt, write “manganese sulfate, anhydrous, CAS 7785-87-7” and give it its own water and manganese limits. A specification written for the monohydrate does not transfer.
When the other hydrate is the wrong purchase
The anhydrous salt is the wrong choice when the label, the specification or the market file names the monohydrate, and when the plant cannot keep the powder sealed and dry. A hygroscopic material in an open hopper is a moving assay. The monohydrate is the wrong choice when the formula is genuinely moisture-sensitive and the water of crystallisation is a problem, or when the extra 12% of mass per unit manganese does not fit the dosage form. Those are formulation decisions, not default substitutions. Changing either way is a change-control event: a new specification, a fresh label check and a written approval.
The catalog specification is on the manganese sulfate product page. The level-four comparison works through the manganese and fill arithmetic; the COA page shows where the water and manganese results sit; the identity page lists the tests that separate the hydrates. For a chelate or a low-concentration salt, see the manganese gluconate and manganese bisglycinate pages.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation