The regulatory file for manganese sulfate monohydrate
The compliance file for manganese sulfate monohydrate has to connect three things: the material named in the specification, the lot released by the certificate, and the route the finished product takes in its destination market. The buyer's regulatory team decides that route. This page sets out the documents and checks the file should contain, and it names the frameworks to read rather than replacing them.
A certificate can describe the salt, but only the destination file can say whether the salt, the level and the label are acceptable there.
What has to be in the file
Four questions shape the file. What specification version, hydrate and grade are on the order? What does the certificate say about the lot being released? Which limits and label rules govern the finished product? And what is the change route for source, process and pack? The certificate handles the lot, the technical data sheet handles the specification, and the safety data sheet handles handling. The route question needs its own answer, and the food-additive route is a separate question from the supplement route; the file should say which one the finished product uses.
For this salt, grade comes before route. Manganese sulfate is also traded as a feed additive and as a fertiliser. Those grades are not the supplement material, even when the assay looks familiar. The file should show a food-grade specification and the manufacturing controls behind it. The hydrate needs to be named as well: the monohydrate and the anhydrous salt give different manganese figures, and the destination file should say which one it covers.
European Union
Directive 2002/46/EC is the food-supplement framework to start from. Its Annex II lists mineral substances and forms; “manganese sulphate” is the spelling to locate, and the buyer's team confirms the current entry, the hydrate and any condition attached. General food law, labelling and contaminant rules sit alongside that entry. The nutrition declaration expresses manganese in mg and as a share of the nutrient reference value; the EU reference value is 2 mg per day.
Mineral maxima for supplements are not fully harmonised. Several member states set their own, so the destination file should name the limit that applies. A supplier statement that the lot is food grade does not replace the entry check. Check the current text before the order; this summary is not a substitute, and the entry can change.
United States
The US file begins with the dietary-supplement route. Manganese sulfate is affirmed as GRAS for nutrient-supplement use at 21 CFR 184.1461; the buyer's team confirms that the intended use and level fit the affirmation and that the finished product meets the supplement cGMP at 21 CFR Part 111. The Supplement Facts panel names the source, and the daily value for manganese is 2.3 mg for adults and children four years and older.
The label and any claim are reviewed apart from the certificate. A GRAS affirmation for a food use does not authorise a structure/function statement, and a statement does not alter the specification. This page does not assert that either hydrate is permitted in a particular market.
Contaminants in the finished product
A contaminant result on the drum is a concentration, not an intake. The file has to convert the lot figure to the daily dose of the finished product and compare it with the limit that applies there. The table is a starting point for a supplement file; the destination text and the dose settle the final number.
| Metal | Reference level in the supplement | Evidence the file needs |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg | Measured result, method and dose calculation |
| Cadmium (Cd) | 1.0 mg/kg | Measured result; note any category exception |
| Mercury (Hg) | 0.10 mg/kg | Measured result and method |
| Arsenic (As) | Agreed with the customer or set by the market | The chosen limit and the method reported |
The manganese figure enters the same calculation. A label declaring 10 mg of manganese uses about 31 mg of monohydrate at 98.0% assay, so the salt weight and the element weight are not interchangeable. The intake calculation should use the element figure and the lot's actual assay.
Claims and label wording
No disease-related claim is made for this ingredient. In the EU, manganese has a small set of Article 13(1) claims tied to normal function; they are conditional, and the product must qualify as a source of manganese. The brand's reviewer confirms the exact wording, the condition of use and the market. In the US, a structure/function statement must be truthful, not misleading, and carry the required disclaimer; the reviewer confirms it too.
Approval of a claim is separate from approval of a specification. A certificate cannot authorise label text, and label text cannot change what was tested. The label should also name the hydrate, because the manganese figure per gram depends on it.
Documents to assemble
The file should hold the current specification, with the version, hydrate and grade identified; the lot COA; the TDS; the SDS; a mineral-origin statement with allergen and GMO declarations; the contaminant results and the finished-product calculation; the label artwork and claim review; and the change-control route for source, process and pack.
For an inorganic salt, a residual-solvent declaration is rarely the gap that matters. The real gaps are the hydrate, the water figure, the grade and the metals panel. If a document is missing, record the gap before the purchase order, not after the shipment arrives. Version numbers on the document list are more useful than a folder of undated files.
Before the first order
- The specification names the hydrate, the CAS number and the grade.
- Food grade is stated; feed grade and technical grade are excluded.
- COA, TDS, SDS, origin, allergen and GMO documents are present.
- Metals results have been converted to the finished-product dose.
- Label and claim wording have been reviewed for the destination.
- Source, process and pack sit under change control.
- Quotation, specification and certificate share one version.
The manganese sulfate product page has the catalog specification; COA page guidance covers the lot certificate; analytical evidence is on the identity page. Methods notes describe the tests, and the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation