04 MOQ & ordering

Manganese sulfate monohydrate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Manganese Sulfate

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a traced lot
  6. Terms to settle before ordering

The minimum order for manganese sulfate monohydrate is 1 kg, packed in a foil pouch; production volume ships in a 25 kg fiber drum. Standard packs leave in 1–7 days. To turn an enquiry into a firm quotation, we need the hydrate and CAS number, the assay and manganese basis, the quantity and pack, the destination and Incoterm, the document list, and the market the material is intended for.

In one line

One kilogram is the smallest pack we trace as a lot, and at 32.5% manganese it already carries enough active for tens of thousands of capsules.

Why the minimum is 1 kg

One kilogram is a lot, not a scoop. It can be sampled, tested, retained and traced, and it travels as a parcel. The sulfate is concentrated, so a kilogram goes further than the number suggests: at 32.5% manganese it holds about 320 g of the element, which is roughly 31,800 capsules at a 10 mg declaration before excipients. That is enough for a pilot batch or a small production run. The minimum exists to protect traceability, not to push volume.

Smaller quantities are usually repacked from a larger lot. Repacking adds a handling step and a new container identity, and it weakens the link between the certificate and the pack. At the other end, the 25 kg drum lowers handling per kilogram but ties up inventory. A plant using a few kilograms a month should compare the drum with its usage rate, because the pack may outlast the retest period.

Packs and formats

Packs for manganese sulfate monohydrate
PackSizeWhere it fitsWhat to know
Foil pouch1 kgTrial, sample, small batchMoisture barrier; close tightly after use
Fiber drum25 kgProductionLiner inside; lot code on drum and liner
Granulated monohydrateOn requestFlow and dust controlParticle profile and bulk density change

Granulation is a specification change, not a packing preference. It changes particle size and bulk density, and it may change the lead time. Dilution is a different product: the manganese per gram falls, a carrier is added and the label changes. The catalog powder passes 40 mesh at 95% or better.

Lead time and dispatch

Standard packs are quoted at 1–7 days after order confirmation. That covers picking, documents and dispatch; transit, customs and the customer's own release are outside it. A granulated grade or a non-standard pack takes longer, and the quotation should say so separately.

Ask for a dispatch date as well as a lead time. The Incoterm decides who books freight and who clears entry, and a drum and a pouch do not travel the same way. Documents should accompany the lot.

What a quotation needs

Six details make quotations comparable:

  1. Hydrate and CAS. Manganese sulfate monohydrate, CAS 10034-96-5.
  2. Specification. Water, particle size, metals, microbiology, and the assay and manganese figures with their basis.
  3. Quantity and pack. A 1 kg pouch, a 25 kg drum, or granulation on request.
  4. Destination and Incoterm. Country, port or address, and trade term.
  5. Documents. COA, specification, SDS and any destination-specific statement.
  6. Use and market. Supplement, food or other use, and the country of sale.

A quotation that omits the hydrate or the market is not comparable with one that includes them. Commercial terms are not published here; they are set out in the quotation.

The sample is a traced lot

The 1 kg pouch is the qualification pack. Test identity, assay, manganese, water and microbiology, and retain a sample from that same pack. The lot code should connect the sample, the COA and the quotation. A sample without a lot code is a demonstration.

Need less than a kilogram for a bench trial? Raise it first. Splitting a bulk lot produces a repack with its own traceability; it is not the catalog pack. Do not assume the bench sample and the production drum share a lot.

Terms to settle before ordering

The quotation covers the commercial basis, Incoterm, pack, lead time and documents. The quality side needs its own terms: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than a dispute afterwards.

Returns and replacements are handled under the quotation and the quality agreement. If a lot fails the agreed specification, work from the retained sample and a joint re-test rather than a photograph. Agree in advance who pays for the referee laboratory and which laboratory both sides accept.

The manganese sulfate product page has the catalog specification; release tests are listed on the COA page; market files are on the compliance page; methods notes define the titration; the quality page has the release file. For another manganese salt, see the manganese gluconate and manganese bisglycinate pages.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation