06 Identity & adulteration

How we prove a manganese bisglycinate lot is the chelate

Technical document 06 · Reviewed 2026-11-19 · Manganese Bisglycinate

On this page
  1. The identity layers
  2. The manganese-to-glycine ratio
  3. XRD and FTIR: the solid-state check
  4. What adulteration looks like
  5. How to write the identity into the specification
  6. Five questions for the supplier

A manganese bisglycinate lot is the chelate when the document names the form and CAS number, the manganese and glycine figures calculate to a 1:2 ratio, the solid-state tests show a coordinated complex rather than a blend, and the certificate discloses everything in the drum. The manganese assay alone cannot separate the chelate from manganese oxide, manganese sulfate or manganese gluconate. Identity is the agreement of those lines, not a single percentage.

In one line

Identity is the agreement of manganese, glycine, their ratio and the solid form; a manganese percentage on its own identifies nothing.

The identity layers

A certificate may carry the right name and still leave the material unproven. Each layer asks a different question and needs its own evidence. Answering only the first question tells you about the paperwork, not the powder.

Five layers of manganese bisglycinate identity
LayerQuestionTestWhat it proves
DocumentIs the form named?Name, CAS number, formulaPaperwork only
ElementalHow much manganese?Complexometric titrationThe metal, not the ligand
LigandHow much glycine?HPLC, total and freeThe ligand, not the ratio
StoichiometryIs the ratio 1:2?Calculation from the two assaysAgreement with the chelate
Solid stateIs it coordinated?XRD and FTIRThe solid form, not the purity

The manganese-to-glycine ratio

The formula is C4H8MnN2O4: one manganese to two glycine ligands. The formula weight is 203.06 g/mol, and the manganese fraction is 54.94 ÷ 203.06 = 27.06% in the anhydrous complex. Glycine, reported as the free amino acid after hydrolysis, is about 73.9% of that formula weight. The two figures sum to slightly more than 100% because hydrolysis adds the protons that the ligand did not carry in the complex; that is arithmetic, not a mass-balance failure.

To calculate the ratio, convert each result to moles: manganese ÷ 54.94, glycine ÷ 75.07. Divide the glycine moles by the manganese moles. A true 1:2 complex gives 2.00. The two results must be on the same moisture basis; an as-is manganese figure divided by a dried-basis glycine figure is not a ratio.

Free glycine completes the ligand picture. A total-glycine result includes ligand that is bound and ligand that is loose, so a high total paired with a high free figure points to added glycine, not extra chelate. A normal manganese result with a low glycine figure suggests a second manganese source or a carrier. Because the catalog panel has no glycine line, the ratio is an extra test; order it when the chelate form is the reason for the purchase.

XRD and FTIR: the solid-state check

X-ray diffraction answers a structural question: is there a crystalline second phase, and does the pattern match a reference? For a chelate, the most useful target is a crystalline manganese oxide or sulfate in a blend. XRD is not a purity assay, and an amorphous second source may not appear. A report that says “absent” without a detection limit has not answered the question.

FTIR examines the ligand side of the same sample. A reacted chelate gives different carboxylate and amine bands from a dry mix of manganese salt and glycine, because coordination shifts those bands. The spectrum is evidence of coordination, not a quantity; it cannot say what fraction of the drum is chelate.

Neither method replaces the elemental and ligand assays. A lot that passes manganese, glycine and the ratio but contains a crystalline oxide can still be a blend; a lot that passes XRD but has a low glycine figure is not the chelate. The methods are read together.

What adulteration looks like

Common manganese bisglycinate substitutions and the signals
AdulterantWhat it doesSignalTest
Manganese oxideLifts manganese above the chelate figure; lowers the glycine shareManganese high; ratio low; dark specksXRD, titration, glycine
Manganese sulfateLifts manganese; adds sulfate and waterManganese high; water high; sulfate detectedIon chromatography, Karl Fischer, XRD
Manganese gluconateLowers manganese and adds a different anionManganese low; glycine low; gluconate detectedHPLC, FTIR, titration
Added glycineRaises total and free glycine; masks a low chelate shareFree glycine high; ratio highHPLC free glycine, ratio
Carrier or dilutionLowers manganese and glycine togetherBoth low; mass balanceAssay, loss on drying, microscopy
MoistureRaises loss on drying; lowers the as-is assayLoss on drying high; as-is assay lowLoss on drying

Appearance is the weakest evidence; a blend can sit inside the off-white to pale pink window. The ratio, the free-glycine result, the water figure and a crystalline phase are the stronger signals. A certificate that shows only appearance and manganese has not tested the ligand at all.

How to write the identity into the specification

  • “Manganese bisglycinate, CAS 14281-77-7, C4H8MnN2O4; the material is the chelate, not a blend.”
  • “Assay 98.0–102.0% by HPLC; manganese 25.0–27.5% by complexometric titration; both on the same stated basis.”
  • “Total glycine and free glycine by HPLC; the Mn:glycine ratio can be agreed at 1.95–2.05.”
  • “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.”
  • “XRD: no crystalline manganese oxide or sulfate detected, with the detection limit reported; FTIR coordination on request.”
  • “No added manganese oxide, sulfate or gluconate; the blender, if any, is named on the certificate.”

Five questions for the supplier

  1. Is the lot one chelate, or a blend? If it is a blend, what are the components and their proportions?
  2. What are the manganese and glycine results for this lot, and on what basis was each reported?
  3. What ratio do the results give, and what is the free-glycine result?
  4. Does an XRD report cover crystalline manganese oxide or sulfate, and what detection limit does it quote? Can you supply an FTIR spectrum?
  5. Which manganese source and drying step were used, and was the material blended after chelation?

Those five answers, taken together, make up an identity file. A single manganese percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the level-four comparison covers the fill and label consequences; the XRD note and the FTIR note describe the solid-state methods; the HPLC note explains the ligand assay.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation