01 COA & batch testing

What the COA for manganese bisglycinate actually contains

Technical document 01 · Reviewed 2026-11-19 · Manganese Bisglycinate

On this page
  1. The certificate as a test report
  2. What the assay and the manganese figure measure
  3. Release limit versus batch result
  4. What moves between batches
  5. When to order an outside test
  6. What to compare between suppliers

A manganese bisglycinate certificate carries appearance, IR and HPLC identification, an HPLC assay, a complexometric manganese result, loss on drying, the heavy-metal panel, microbiology and a sieve result. Those two potency numbers describe the same complex from different angles, and the certificate only becomes checkable when each is tied to a method and a moisture basis. The limits in this page belong to the catalog specification; a batch COA is the record for one pack.

In one line

The assay and the manganese figure are two views of one complex, and the certificate is only auditable when each carries its method and its basis.

The certificate as a test report

Each line on a certificate should let a reviewer reconstruct the release decision: what was tested, how, and against which limit. A bare “conforms” gives the conclusion but withholds the evidence. The identification row settles the form; the manganese row settles the metal content. Neither is a purity figure by itself.

Identity, assay, moisture and contaminants · manganese bisglycinate
ParameterMethodRelease limit
AppearanceVisualOff-white to pale pink powder
IdentificationIR and HPLC retentionConforms to the reference
AssayHPLC98.0–102.0%
Manganese (Mn)Complexometric titration25.0–27.5%
Loss on dryingGravimetric≤5.0%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent
Particle sizeSieve analysis≥95% through 40 mesh

What the assay and the manganese figure measure

The complex is C4H8MnN2O4, one manganese and two glycine ligands, with a formula weight of 203.06 g/mol. Manganese accounts for 54.94 ÷ 203.06 = 27.06% of the anhydrous formula. With an assay of 98.0–102.0% on the dried basis and loss on drying between 0% and 5.0%, the as-is manganese result should fall near 25.2–27.6%. The catalog window of 25.0–27.5% is consistent with that calculation, provided the certificate declares the basis for both numbers.

The arithmetic shifts with the basis. An assay of 98.0% on the dried basis and 5.0% water gives about 25.2% manganese as-is; the same assay on an as-is basis with no water gives about 26.5%. The assay row should state “dried basis” or “as-is” directly, and the manganese row should use the same moisture reference.

The catalog panel has no glycine line. A 1:2 ratio is therefore an extra test, not a routine certificate row. When the chelate form is the reason for the purchase, request total and free glycine and calculate the ratio; the identity page explains how.

Release limit versus batch result

The limit is the boundary for release; the result is the number obtained from the lot. A certificate that prints the specification range in the result column has not reported a measurement. Put the two in separate columns, with the method alongside.

What the result column should contain
ParameterRelease limitResult column
Assay98.0–102.0%A measured percentage, with the basis and the chromatographic conditions
Manganese25.0–27.5%A measured percentage by titration, on the stated basis
Loss on drying≤5.0%A measured percentage
Heavy metalsPer elementA measured figure in mg/kg for each element
MicrobiologyCounts and absenceThe count and the absence statement for the lot
Particle size≥95% through 40 meshThe measured percentage through the sieve

“Passes specification” is the end of the review, not the evidence for it. Microbiology needs a count and an absence statement; the metals panel needs a figure for each element. A summed metal result conceals which element drove it. Manganese is the analyte, not a contaminant, and has no place in that sum.

What moves between batches

Reaction, crystallisation and drying shift the assay, the manganese value and the water figure. Milling and sieving change the particle-size result while the chemistry stays put. Appearance is the least numerical line: the catalog allows off-white to pale pink, and a pink cast is ordinary for manganese(II). A brown or black speck falls outside that description and deserves an investigation for manganese oxide, not a colour waiver.

Free glycine is the variable that belongs to a chelate. Extra ligand can leave the manganese and assay lines in range while part of the glycine is unbound, which is why the ratio and the free-glycine result matter in the supplier file even though the catalog panel omits them.

One lot near an edge is less informative than a series: manganese falling, water rising, or an extra chromatographic peak. The lot code should be identical on the certificate, the pack and the retained sample.

When to order an outside test

Use an outside laboratory for a new source, a first shipment into a regulated market, a form claim the supplier's certificate cannot support, or a result in dispute. The panel can be targeted rather than a copy of the full certificate: HPLC for assay and identity, complexometric titration for manganese, glycine by HPLC or amino-acid analysis, water by loss on drying, ICP-MS for the metals, microbiology, and XRD or FTIR if the solid form is disputed.

Every screen should come with its detection limit, especially XRD. A “not detected” entry with no limit describes the method's reach, not the sample. The laboratory should test the retained sample and name the lot in its report.

When the chelate claim is contested, ask for the tests that distinguish forms rather than another assay: total and free glycine, the calculated ratio, XRD for a crystalline second phase, and FTIR for coordination.

What to compare between suppliers

Six lines are enough to compare two suppliers: form and CAS number; assay and basis; manganese and method; total and free glycine, with the ratio; loss on drying; and the contaminant, microbiology and particle-size results. A quotation that matches on manganese but not on the ratio or the basis is a different powder.

Traceability is the second layer. The certificate should identify the manufacturer, the manganese source, the chelation and drying steps, and whether anyone blended the material after chelation. A blend can carry the chelate maker's certificate while describing a drum the maker never filled.

The catalog specification is on the manganese bisglycinate product hub. The tests that separate the chelate from a blend are on the identity page; the market file is on the compliance page; the chromatographic assay is described in the HPLC method note; the titration is described in the complexometric titration note; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation