Manganese bisglycinate, gluconate or sulfate: choosing a form
Manganese is supplied as the bisglycinate chelate, the gluconate salt and the sulfate salt, and the catalog manganese figures are 25.0–27.5%, 11.5–12.5% and 31.5–33.0% respectively. The form decides the label name, the solubility and the mass needed for a given manganese dose before it decides anything else. The choice is a formulation and market-file decision, not a race to the highest manganese percentage.
The form decides the label name, the manganese per gram and the fill weight; the assay percentage alone does not.
Why manganese comes in more than one form
The three forms are different chemistries, not three grades of one material. Manganese bisglycinate is a chelate: one manganese ion coordinated to two glycine ligands. Manganese gluconate is a salt of gluconic acid. Manganese sulfate is a hydrated inorganic salt. The word on the label has to match the chemistry in the drum, because a chelate and a salt are different dietary ingredients with different CAS numbers.
Suppliers offer more than one form because dosage forms differ. A capsule or tablet can take any of the three; a drink mix cares about solubility and solution pH; a high-dose tablet cares about the mass per serving. A form that fits one of those may be a poor fit for another, and the manganese percentage is only one line in the comparison.
Within the bisglycinate there is a second question: is the drum one chelate, or a blend of chelate with oxide or sulfate? A blend can reach a manganese figure while failing the chelate description. The identity page deals with that question.
The three forms side by side
| Property | Bisglycinate | Gluconate | Sulfate |
|---|---|---|---|
| Form | 1:2 manganese chelate with glycine | Manganese salt of gluconic acid | Manganese sulfate monohydrate |
| CAS and formula | 14281-77-7 · C4H8MnN2O4 | 6485-39-8 · C12H22MnO14 | 10034-96-5 · MnSO4·H2O |
| Manganese | 25.0–27.5% | 11.5–12.5% | 31.5–33.0% |
| Assay | 98.0–102.0% by HPLC | 98.0–102.0% by titration | ≥98.0% by titration |
| Water | Loss on drying ≤5.0% | Water ≤1.0% | Water 10.0–12.0% |
| Appearance | Off-white to pale pink | White to pinkish | Pale pink |
| Solution | Soluble; acidic | Freely soluble; neutral | Freely soluble; acidic |
The manganese column drives the fill weight. The assay column is the release gate. The water column is not a ranking: the sulfate's 10–12% is largely water of crystallisation, the chelate's figure is loss on drying, and the gluconate's limit is a Karl Fischer water result. Compare the measurements, not just the numbers.
Powder, colour, flow and solution
All three are free-flowing powders milled to ≥95% through 40 mesh, and granulated versions are available on request. Colour is a useful first check but not an identity test. Manganese(II) is pale pink, so an off-white to pink tint is expected. A dark brown or black speck points to manganese oxide and should be investigated rather than blended away.
Solubility separates the forms in a drink mix. The gluconate dissolves freely and gives a neutral solution; the sulfate dissolves freely and the solution is acidic; the bisglycinate is soluble and its solution is acidic. The chelate's acidic solution can shift a pH-sensitive matrix, while the gluconate's neutral solution may suit a ready-to-mix powder. A clear solution is not proof of stability; measure the hold time in the matrix.
Flow and dust matter at the filling line. A 40 mesh powder can be dusty, and granulation improves flow while reducing dust. It changes the particle-size line and may change the dissolution behaviour, so the certificate for a granulated pack should carry that pack's particle result.
Dose arithmetic and the fill
Divide the target elemental manganese by the manganese figure of the form. At 25.0–27.5% for the bisglycinate, 2 mg of manganese takes 7.3–8.0 mg of the chelate. At 11.5–12.5% for the gluconate, the same 2 mg takes 16.0–17.4 mg. At 31.5–33.0% for the sulfate, it takes 6.1–6.3 mg.
| Target manganese | Bisglycinate | Gluconate | Sulfate |
|---|---|---|---|
| 2 mg | 7.3–8.0 mg | 16.0–17.4 mg | 6.1–6.3 mg |
| 2.3 mg | 8.4–9.2 mg | 18.4–20.0 mg | 7.0–7.3 mg |
| 10 mg | 36.4–40.0 mg | 80.0–87.0 mg | 30.3–31.7 mg |
The arithmetic uses the catalog range, not a batch result. A lot's measured manganese figure replaces the range for that lot, and the assay of 98.0–102.0% adds a small correction for active content. The label declares elemental manganese; the ingredient weight is the vehicle, and it should not be confused with the dose.
The 10 mg row is arithmetic, not a suggested intake. The finished-product dose is the brand's decision against the destination rules and the total manganese intake from all sources. The fill calculation belongs to the label and the formula, not to the ingredient supplier.
What to write into the specification
- “Manganese bisglycinate, CAS 14281-77-7, C4H8MnN2O4; the material is the chelate, not a blend.”
- “Assay 98.0–102.0% by HPLC; manganese 25.0–27.5% by complexometric titration; both on the same stated basis.”
- “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.”
- “Total glycine and free glycine by HPLC, with the calculated Mn:glycine ratio, where the chelate form is the purchase decision.”
- “Heavy metals and microbiology as listed; no added manganese oxide, sulfate or gluconate.”
For the gluconate or the sulfate, the same structure applies with that form's assay, manganese and water limits. A specification written for one form does not transfer to another, even when the manganese target is the same. The bisglycinate versus gluconate comparison works through the fill arithmetic in more detail; the manganese gluconate hub and the manganese sulfate hub carry those catalog specifications.
When a form is the wrong choice
If the label names manganese gluconate, the bisglycinate is not a substitute, even though it carries more manganese per gram. The label ingredient, the CAS number and the market file all change, and the reverse substitution is equally wrong. Any switch needs change control, a fresh specification and a label review.
If the formula needs a neutral solution, the gluconate is the easier starting point. If it needs the highest manganese per gram and the label permits the sulfate, the sulfate is the most concentrated of the three, but it carries 10–12% water of crystallisation and its solution is acidic. If the drum is a blend, none of the columns describes it; the blend is its own specification and the blender owns the certificate.
The product hub carries the catalog specification; the grades page places this comparison in the range; the analytical methods library explains the tests; the chelate glossary entry defines the term; the quality page describes the release workflow.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation