02.1 Bisglycinate vs gluconate

Manganese bisglycinate vs manganese gluconate: the chelate, the manganese and the fill

Technical document 02.1 · Reviewed 2026-11-19 · Manganese Bisglycinate

On this page
  1. A chelate and a salt are different ingredients
  2. The manganese figures and the label
  3. What the difference does to the fill
  4. Solubility, solution pH and stability
  5. What the switch does to the label and the file
  6. When to choose which

Manganese bisglycinate and manganese gluconate deliver the same mineral in different packages. The chelate carries 25.0–27.5% manganese and the gluconate 11.5–12.5%, so a 2 mg manganese dose takes about 7.3–8.0 mg of the chelate or 16.0–17.4 mg of the gluconate. The switch changes the label ingredient and the fill weight before it changes the dose.

In one line

The chelate and the gluconate carry the same manganese at different densities, so the label dose sets a fill weight that is roughly twice as large for the gluconate.

A chelate and a salt are different ingredients

Manganese bisglycinate is a chelate: one manganese ion coordinated to two glycine ligands, C4H8MnN2O4, CAS 14281-77-7. Manganese gluconate is a salt: manganese associated with two gluconate anions, C12H22MnO14, CAS 6485-39-8. The names describe different chemistry, and the label has to use the name of the material in the drum.

The molecular weights explain the manganese figures. The chelate is 203.06 g/mol and carries 27.06% manganese in the anhydrous complex. The gluconate is 445.24 g/mol and carries 12.34%. The catalog ranges, 25.0–27.5% and 11.5–12.5%, sit around those theoretical values and leave room for moisture and assay tolerance.

Manganese bisglycinate against manganese gluconate · catalog values
PropertyManganese bisglycinateManganese gluconate
Chemistry1:2 chelate of manganese(II) with glycineManganese salt of gluconic acid
CAS14281-77-76485-39-8
FormulaC4H8MnN2O4C12H22MnO14
Manganese25.0–27.5%11.5–12.5%
Assay98.0–102.0% by HPLC98.0–102.0% by titration
WaterLoss on drying ≤5.0%Water ≤1.0%
AppearanceOff-white to pale pink powderWhite to pinkish powder
SolutionSoluble; acidicFreely soluble; neutral

The manganese figures and the label

The two figures are not a quality ranking. They are a concentration: the chelate carries about 2.2 times as much manganese per gram as the gluconate. The midpoint of the chelate range is 26.25%, the midpoint of the gluconate range is 12.0%, and 26.25 ÷ 12.0 = 2.19. The theoretical ratio is 27.06 ÷ 12.34 = 2.19. That factor is the arithmetic behind every fill calculation.

The label declares elemental manganese, not the weight of the ingredient. A label that says 2 mg manganese (as manganese bisglycinate) and a label that says 2 mg manganese (as manganese gluconate) declare the same mineral but different ingredients. The “as” line is part of the identity, and it has to match the certificate and the market file.

The assay is a second, smaller variable. Both forms are specified at 98.0–102.0%, so the active content moves the weighed mass by a few percent, not by a factor of two. Use the lot's measured manganese figure for the fill and the assay for the release decision.

What the difference does to the fill

The fill arithmetic is division: target manganese ÷ manganese figure = ingredient mass. A lot result replaces the catalog range at the weigh-up.

Ingredient mass for a target manganese dose · catalog ranges
Target manganeseBisglycinateGluconate
2 mg7.3–8.0 mg16.0–17.4 mg
2.3 mg8.4–9.2 mg18.4–20.0 mg
10 mg36.4–40.0 mg80.0–87.0 mg

At 2 mg, the difference is about 9 mg per capsule, which may not change the capsule size. At 10 mg, the difference is about 45 mg, which can decide between a small and a larger capsule, or between one tablet and two. In a multi-mineral formula, the difference adds to the excipient load and the tablet weight.

The 10 mg row is arithmetic, not a recommended intake. The finished-product dose is the brand's decision against the destination rules and total manganese intake from all sources.

Most of either powder is not manganese. The chelate is a little over a quarter manganese and the rest is glycine ligand; the gluconate is about one-eighth manganese and the rest is gluconate. That is why the weights differ so much for the same dose, and why the label cannot swap the two forms gram for gram.

Solubility, solution pH and stability

Both forms are water-soluble, but the solutions are not the same. The bisglycinate dissolves to an acidic solution; the gluconate dissolves freely to a neutral solution. In a drink mix, the gluconate's neutral pH is easier on a pH-sensitive matrix, while the chelate's acidic solution may need buffering or a shorter hold. In a capsule or tablet, the difference matters less because the powder is swallowed, not dissolved.

A soluble powder is not automatically a stable solution. The chelate is specified at loss on drying ≤5.0% and the gluconate at water ≤1.0%; the chelate's specification allows more water, so the pack and the humidity control matter more. In solution, manganese(II) can oxidise as the pH rises, and a brown colour or precipitate is the visible sign. Test the hold time in the real matrix rather than assuming that a soluble powder makes a stable drink.

The gluconate's larger fill can also affect mouthfeel and suspension in a stick pack. A 2 mg dose is a small amount of either powder; a 10 mg dose is a visible amount of the gluconate, and the carrier or the serving size has to accommodate it.

What the switch does to the label and the file

The label name follows the form. In the EU, the nutrition declaration gives the manganese amount per portion and the percentage of the 2 mg NRV. In the US, the Supplement Facts panel names manganese and the “as” line names the form; the Daily Value is 2.3 mg. The exact wording and the market file are the brand's regulatory team's decision.

A switch from gluconate to bisglycinate changes the ingredient name, the CAS number and the fill weight. The manganese declaration stays the same, but the “as” line and the ingredient list change. If the label says gluconate and the drum is bisglycinate, the label is wrong even when the manganese figure matches.

The market file may cover one form and not the other. The current positive list, the notification and the claim file are form-specific; a switch requires change control and a destination review, not only a new COA.

When to choose which

Choose the bisglycinate when the label or the formulation calls for the chelate, when the manganese dose is low and the capsule fill is tight, or when the acidic solution is acceptable in the matrix. Choose the gluconate when the label calls for the salt, when a neutral solution is wanted, or when the larger fill is acceptable for the dose.

Neither form is a drop-in for the other. The manganese figure, the fill weight, the solution pH and the label name all change. If the market file covers only one form, the other is outside it even when the assay is higher.

The bisglycinate hub carries the catalog specification; the manganese gluconate hub and the manganese sulfate hub carry the other forms; the grades page places this comparison in the range; the identity page gives the tests that separate the chelate from a blend; the bisglycinate glossary entry defines the term; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation