03 Stability

Magnesium malate is stable dry; the hydrate and the matrix decide the rest

Technical document 03 · Reviewed 2026-11-18 · Magnesium Malate

On this page
  1. The sealed drum
  2. pH, cations and heat
  3. What moves the figure
  4. Two studies
  5. The pack and the matrix
  6. The date comes from the data

Magnesium malate arrives as a hydrated crystalline powder, with 22.0–26.5% water written into the specification. That water is part of the salt, not a packing fault, but it is also the part most likely to move after the liner is opened. Storage problems show up as caking and flow loss; formula problems show up as haze, colour or a pH shift, and the two are easier to separate when the powder and the finished dose are studied on their own.

In one line

The dry salt keeps in a sealed pack; the water it already carries, the pH of the matrix and the pack decide whether it still flows and assays at the end of the shelf life.

The sealed drum

A sealed 25 kg fiber drum with an intact food-grade liner is a stable package at ambient temperature. The salt is ionic and crystalline; the magnesium assay has no route to drift while the pack stays closed. The risk arrives with the first opening, when the powder meets the room.

The 22.0–26.5% water is mostly water of crystallisation. It is not free liquid, but it can exchange with the air. In a damp room the powder picks up surface moisture, and the signs are caking, slower flow and bridging above the hopper. In a very dry room the exchange can reverse, and a crystal that loses water is no longer the same hydrate. The specification range is a window, not a target to beat by extending the drying step.

Karl Fischer is the figure to watch, because it measures water rather than total volatiles. A lot at the low end of the range can climb in storage, and a lot in a dry store can fall. The hydrate entry and the loss-on-drying entry explain why the two tests are not interchangeable.

Light is not a practical concern. A tint that develops in storage points to moisture, a trace metal or a drying step, and it is worth a look at the batch record.

pH, cations and heat

A 5% suspension reads pH 4.0–7.0. The figure comes from the salt itself: malate is the base form of a weak acid and buffers the water around its own pH. In a formula, the surrounding pH pushes the equilibrium.

As the matrix drops below about pH 3.4, malate picks up protons and the magnesium is released as the free ion. Solubility rises, the taste sharpens, and the acid system has to be chosen on purpose. As the matrix rises above about pH 9, magnesium can come out as the hydroxide, which reads as haze or sediment rather than as a lower assay.

Other divalent cations are the second variable. Malate can associate with calcium, iron and zinc, so a clear drink that carries both the malate and a calcium salt may not stay clear. Iron can move the colour. Heat speeds up the exchange and any browning from a reducing sugar.

Test at production pH, with the full mineral load and the real process temperature; a room-temperature solubility check will not predict the matrix.

What moves the figure

Stability factors · magnesium malate in storage and in formula
FactorEffectControl
Moisture gainCaking, slower flow, higher Karl Fischer waterSealed liner, dry store, desiccant
Moisture lossDehydration, phase change, dustKeep the drying step fixed; control store humidity
pH below 3.4Protonation, sharper taste, free magnesiumChoose the acid level; taste the matrix
pH above 9Haze or sediment as magnesium hydroxideKeep the matrix buffered, away from alkaline pH
Calcium, iron or zincAssociation, haze, colour shiftSeparate the minerals or design a cloudy format
HeatFaster exchange, browning with reducing sugarsCool the process; hold water activity
PackMoisture vapour transfer, odour transferSticks need foil; drums need a sealed liner

Two studies

The powder study uses the commercial pack and two conditions: 25 °C/60% RH and 40 °C/75% RH. Pull samples at 0, 2, 6, 12 and 24 months and test magnesium, water, pH, appearance, mesh and microbiology. The warmer condition is there to make a trend visible within the study window; it is not a storage instruction.

The finished-dose study is separate. Capsules, tablets, sticks or gummies go into 30 °C/65% RH and 40 °C/75% RH, and the endpoints are magnesium, moisture, colour, taste and, where the form needs it, dissolution or disintegration. A powder can pass while the dose fails, so both files are needed.

The pack and the matrix

For a capsule or tablet, the threats are moisture and the excipient list. In a direct-compression blend, choose a lubricant that carries no water, and protect a moisture-sensitive powder with a sealed blister or a tight HDPE pack and desiccant. Water-based granulation is possible if the drying step is validated against the water range.

A stick pack lives or dies on its laminate. Start with a foil structure, heat-sealed and chosen for a low moisture-vapour transmission rate; a paper or clear pack is a retail choice that needs data behind it. In a gummy or chew, the sugar system, water activity and pH dominate, and the malate's water has to be counted in the water budget. In a drink, pH and preservative system come first; the malate is easier to run as a suspension or a hot process than as a clear cold solution.

The date comes from the data

No shelf-life figure is attached to the molecule. The period is the one the study justifies for that grade, that pack and that matrix. The technical data sheet states the storage condition and whether the number is a retest period or an expiry date. A bulk ingredient that is checked again before use usually carries a retest period; a consumer pack carries an expiry date.

Where the data stop short of the pack, matrix or climate, shorten the period or run another study. One re-test of an old lot does not create a new shelf life. The COA page lists the parameters to follow, the ordering page lists the packs a study has to cover, and the quality page describes the records. The catalogue line is on the product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation