Minerals & Electrolytes · Core range
Magnesium Malate
C₄H₁₀MgO₈ · CAS 869-06-7 · Magnesium DL-malate, dihydrate
Magnesium DL-malate dihydrate specified at 11.3–11.8% elemental magnesium, for capsules and tablets where the malate salt and the water content have to be declared.
- Magnesium (Mg)
- 11.3–11.8%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Magnesium (Mg) | 11.3–11.8% (complexometric EDTA) |
|---|---|
| Appearance | White to off-white powder |
| Identification | Malate reaction and IR conform |
| Water (Karl Fischer) | 22.0–26.5% |
| pH (5% suspension) | 4.0–7.0 |
| Particle size | ≥95% through 80 mesh |
| Bulk density | 0.50–0.85 g/mL |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₄H₁₀MgO₈ |
| CAS | 869-06-7 |
| Marker set | Magnesium (11.3–11.8%, dihydrate) |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Sparingly soluble in water; soluble in hot water. |
Primary method Complexometric EDTA titration — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Magnesium Malate. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the hydrate and the malate form; magnesium malate and magnesium citrate are different label ingredients.
- Ask for the magnesium assay and the malate identity; a magnesium figure alone does not prove the salt.
- The water content is high by design; an unusually low LOD may mean a different hydrate.
- Confirm the bulk density and flow for the capsule or stick pack you will run.
Buyer questions
Practical answers
What is Magnesium Malate specified to?
Magnesium (Mg): 11.3–11.8% (complexometric EDTA). The full specification adds Appearance, Identification, Water (Karl Fischer), pH (5% suspension), Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Magnesium Malate is this?
The catalog grade is Magnesium DL-malate, dihydrate. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes, Gummies and chews. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Magnesium Malate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.