06 Identity & adulteration

How we prove a magnesium L-threonate lot is the L salt

Technical document 06 · Reviewed 2026-11-18 · Magnesium L-Threonate

On this page
  1. The four layers of identity
  2. What the titration can and cannot show
  3. What XRD adds, and what it cannot do
  4. The routes that turn up in the trade
  5. How to write the specification
  6. Five questions for a supplier

A magnesium figure cannot establish that a lot is magnesium L-threonate, let alone the L form. Identity needs four layers: the declared name and composition, the ligand, the elemental magnesium and the chiral or crystal evidence. The IR and L-threonate reaction on the certificate are the start of that proof, not the whole of it.

In one line

The magnesium number is not an identity: the ligand, the chiral form and the crystal evidence must agree before a lot is the L salt.

The four layers of identity

Identity layers for magnesium L-threonate · the question each test answers
LayerQuestionTestWhat it proves
Name and compositionIs the declared salt the formula on the label?Specification, CAS, formula, hydrate stateThe material is described, not yet tested
LigandIs the anion L-threonate?IR, L-threonate reaction, L-threonic acid assayThe organic part matches the named salt
ElementIs the magnesium consistent with the salt?Titration for magnesium, salt assay, calculated ratioThe two sides of the salt agree
Chiral and solid formIs it the L form, and is it a salt rather than a blend?Specific rotation, XRD, IR coordinationThe stereochemistry and the solid phase match

The first layer is paperwork, and it matters. A certificate that says “magnesium threonate” without the L prefix, or without a hydrate state, has not described the material precisely enough to compare with the specification. The second and third layers are the ones the catalog certificate already covers. The fourth layer is where a buyer who needs the L form has to ask for more.

What the titration can and cannot show

Magnesium L-threonate is a 1:2 salt: one magnesium ion for two L-threonate anions. The anhydrous salt, C₈H₁₄MgO₁₀, weighs about 294.5 g/mol, so magnesium is about 8.25% of the molecule and L-threonic acid is about 92%. A salt assay of 98.0–102.0% and a magnesium figure of 7.2–8.3% are two measurements of that same structure, taken from different sides.

The ratio is calculated by converting both results to moles. If the salt assay is 100% and the magnesium figure is 8.25%, the material is consistent with a 1:2 salt. If the magnesium is high relative to the salt assay, part of the magnesium may come from another salt; if the salt assay is high relative to the magnesium, the hydrate or the calculation basis is the first thing to check. The ratio is a trend check, not a purity verdict, because each assay carries its own uncertainty.

The magnesium range alone does not fix the hydrate. The anhydrous salt is about 8.25% magnesium, a monohydrate about 7.78% and a dihydrate about 7.36%, and all three sit inside the 7.2–8.3% band. That is why the hydrate state belongs in the specification, and why a loss-on-drying figure of ≤5.0% has to be read next to the form named on the certificate. A stoichiometric monohydrate would carry about 5.8% water, so the certificate should state the hydrate rather than leave it to be inferred.

What XRD adds, and what it cannot do

X-ray diffraction sees crystalline phases. It can show that the lot is a crystalline salt rather than an amorphous carrier, and it can detect crystalline magnesium oxide or another crystalline magnesium salt in a blend. If a material is a physical mixture of magnesium oxide and magnesium L-threonate, the diffractogram can carry both patterns; a reacted salt carries its own.

XRD cannot distinguish L-threonate from D-threonate. The two enantiomers have the same powder pattern in an achiral environment, so a diffraction result says nothing about the chiral form. Specific rotation is the test for that question, and IR is the fingerprint that supports the ligand. Use the three together: XRD for the solid phase and the blend screen, IR for the functional groups, and rotation for the stereochemistry.

The detection limit matters. “No crystalline magnesium oxide detected” means little unless the report also gives the limit and the sample preparation. Ask for the limit of detection and the sample preparation. The XRD method note explains what the technique can and cannot see.

The routes that turn up in the trade

Adulteration routes for magnesium L-threonate and the test that catches each
RouteWhat it looks likeTest that catches it
Magnesium oxide or carbonate addedMagnesium high relative to the salt assay; alkaline shiftCalculated ratio, XRD, pH
Another magnesium salt substitutedMagnesium figure plausible after blending; ligand wrongIR, L-threonic acid assay, specific rotation
Threonic acid or calcium threonate blended inLigand present, but the salt is not fully reactedSalt assay, IR coordination, ion chromatography
D- or racemic threonateIR may match; the chiral form does notSpecific rotation
Dilution with a carrierSalt assay and magnesium both low; powder flows differentlySalt assay, magnesium, L-threonic acid, loss on drying

Substitution and dilution are the routes a magnesium-only check misses; a small oxide addition can also hide inside a wide magnesium range. A diluted lot can still sit inside the range, so the ligand assay is the check that closes the gap.

How to write the specification

  • “Magnesium L-threonate monohydrate” or “anhydrous”, with CAS 778571-57-6 and the formula.
  • Salt assay 98.0–102.0% on the dried basis, with the titration method named.
  • Magnesium 7.2–8.3%, with the basis stated.
  • L-threonic acid not less than 85%, or the ligand assay that supports the salt assay.
  • Identity: IR and L-threonate reaction, plus specific rotation for the L form.
  • Loss on drying ≤5.0%, pH 5.8–9.0, ≥95% through 80 mesh, metals and microbiology.
  • “No added magnesium oxide, carbonate or other magnesium salt.”

The specification should also say which figure the label will declare. If the label declares elemental magnesium, the magnesium range is the release figure that matters; if it declares the salt, the salt assay is. A specification that leaves that choice open invites a certificate and a label that do not match.

Five questions for a supplier

  • Which hydrate is the lot, and what is the water content?
  • What is the salt assay method, and is the result on the dried basis?
  • What are the magnesium and L-threonic acid figures on the same lot, and what ratio do they give?
  • Can you supply the IR, the L-threonate reaction and the specific rotation for this lot?
  • Has the lot been screened for crystalline magnesium oxide or another magnesium salt, and what is the detection limit?

A supplier who can answer all five is offering a specification. One who returns only a magnesium percentage is offering a number. The COA page shows where each figure sits on the certificate, the grade page compares the salt with glycinate, and the product page carries the catalog specification. The FTIR method note explains the ligand fingerprint, and the quality page describes the release record.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation