02 Grade comparison

Magnesium L-threonate or magnesium glycinate: choosing a magnesium salt

Technical document 02 · Reviewed 2026-11-18 · Magnesium L-Threonate

On this page
  1. One element, two delivery packages
  2. The two salts side by side
  3. What the powder does in the blend
  4. Dose, fill weight and the dosage form
  5. What to rewrite when the salt changes
  6. When the other salt is the better fit

Magnesium L-threonate and magnesium bisglycinate deliver the same element from different molecules. Threonate carries 7.2–8.3% magnesium; the 14% glycinate grade carries 13.5–14.2%. The choice is settled by the salt weight a dose requires, the dosage form that has to hold it, and the label the destination market allows.

In one line

Threonate and glycinate deliver the same element at different salt weights; the capsule, the daily magnesium target and the label decide which one fits.

One element, two delivery packages

A magnesium salt is a package around a magnesium ion. The package determines how much of the powder is actually magnesium, how the powder behaves in a blend, and which name has to appear on the label. Threonate and glycinate are both organic salts, but their packages are different sizes, and that difference reaches every part of the formula.

The comparison is not a ranking. A salt that carries less magnesium per gram is not a weaker material; it is a material that asks for more powder to deliver the same milligram figure. The useful question is whether the finished product can hold that powder and still meet its label, its capsule count and its market conditions.

The two salts side by side

Magnesium L-threonate and magnesium bisglycinate · catalog figures
PropertyMagnesium L-threonateMagnesium bisglycinate
FormulaC₈H₁₄MgO₁₀Mg(C₂H₄NO₂)₂
CAS778571-57-614783-68-7
Magnesium content7.2–8.3%13.5–14.2%
Salt for 100 mg magnesium1,205–1,389 mg704–741 mg
pH, 5% solution or suspension5.8–9.08.5–11.5
Loss on drying≤5.0%≤8.0%
Particle size≥95% through 80 mesh≥95% through 40 mesh
EU food-supplement statusNovel food authorised in 2024; Annex II entry added in 2025Annex II magnesium salt

The salt-weight row is the arithmetic that matters. It uses a 100 mg magnesium reference only to compare the two materials; it is not a dose recommendation. The same reference shows why a threonate capsule has to be larger, or more numerous, than a glycinate capsule for the same magnesium figure.

What the powder does in the blend

Magnesium L-threonate is freely soluble in water, and its 5% solution covers a wide pH band from 5.8 to 9.0. Magnesium bisglycinate dissolves as well, though its 5% suspension is alkaline (pH 8.5–11.5). Against an acidic active, the threonate may be the easier partner; in an already alkaline blend, the glycinate may be less likely to shift the pH. Neither rule replaces a compatibility test on the actual formula.

The physical specification also differs. Threonate is supplied at 80 mesh, glycinate at 40 mesh. The finer threonate powder dissolves quickly but can dust, segregate or bridge in a hopper; granulated threonate is available on request. The loss-on-drying limits, ≤5.0% and ≤8.0%, describe different water loads, and water is the variable that most often changes flow and capsule fill.

Both materials are crystalline powders, and both can be milled or granulated. The mesh on the certificate is a sieve result, not a guarantee of flow. Ask for the bulk density and the actual mesh fraction when the formula is sensitive to either.

Dose, fill weight and the dosage form

Start from the magnesium target per serving. At 8.3% magnesium, 1,000 mg of threonate delivers 83 mg; at 7.2%, it delivers 72 mg. The same 1,000 mg of a 14% glycinate delivers about 140 mg. The salt weight per milligram of magnesium is therefore about 12–14 mg for threonate and about 7 mg for glycinate.

A capsule holds a fixed volume, not a fixed weight. A 400–500 mg fill is a common working range for a mineral powder, and the exact figure depends on bulk density. For a 100 mg magnesium target, threonate needs roughly 1,200–1,390 mg of salt, or three to four capsules at that fill; glycinate needs about 700–740 mg, or two capsules. The exact numbers belong to the formula, but the direction is fixed: the lower the magnesium content, the more capsules the same target requires.

The dosage form narrows the choice further. Tablets need a compressible powder and a larger tablet weight for threonate. Powder sticks can carry 1–3 g of salt and suit the lower magnesium density. Drink mixes benefit from the free solubility and the wide pH band. Gummies add water, heat and a pH of their own, so the salt choice has to be tested in that matrix rather than assumed from the powder.

The EU novel-food conditions add a ceiling that is specific to threonate: 250 mg magnesium a day, which at 8.3% is about 3,000 mg of salt. At 7.2%, the same 250 mg needs about 3,470 mg. A label dose has to be built from the assay, not from the nominal salt figure.

What to rewrite when the salt changes

A purchase specification is not transferable between salts. When threonate replaces glycinate, or the reverse, rewrite the lines that carry the identity and the fill arithmetic.

  • The salt name and the hydrate state, not just “magnesium”.
  • The salt assay and the elemental magnesium range, each with its method and basis.
  • The L-threonic acid or glycine figure that supports the ligand side of the identity.
  • Loss on drying, pH, mesh and the bulk density that set the fill.
  • The label basis: elemental magnesium per serving, or the salt weight, and the capsule count that follows.

The finished-product specification has to change with the salt as well: serving size, milligrams of magnesium per serving, number of capsules, and any overage. A formula copied from a glycinate line to a threonate line will under-deliver magnesium unless the fill is recalculated.

When the other salt is the better fit

Glycinate is the better fit when the magnesium target is high, the capsule count has to stay low, or the label needs a form with a long Annex II history and no novel-food conditions. Its 13.5–14.2% magnesium does more work per gram of powder.

Threonate is the better fit when the label names magnesium L-threonate, the magnesium target is modest enough for the salt weight, and the market file supports the form. In the EU that means the novel-food conditions, including the adult-only labelling and the 250 mg magnesium daily figure; in the UK the novel-food authorisation and the monohydrate purity criteria apply. Check those before the formula is fixed, not after the artwork is approved.

The full magnesium content and label comparison is on the threonate versus glycinate page. The specification is on the magnesium L-threonate product page, the certificate lines are on the COA page, and the market conditions are on the compliance page. The magnesium bisglycinate page carries the other salt’s specification, and the elemental assay note explains why the magnesium figure is not a purity figure.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation