Minerals & Electrolytes · Core range

Magnesium L-Threonate

C₈H₁₄MgO₁₀ · CAS 778571-57-6 · Magnesium L-threonate, crystalline

Magnesium L-threonate specified at 98.0–102.0% on the dried basis and 7.2–8.3% elemental magnesium, for capsules where the L-threonate identity and the low magnesium content have to be declared.

Magnesium L-threonate (dried basis)
98.0–102.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Magnesium L-threonate (dried basis)98.0–102.0% (titration)
Magnesium (Mg)7.2–8.3% (titration)
AppearanceWhite to off-white crystalline powder
IdentificationIR and L-threonate reaction conform
pH (5% solution)5.8–9.0
Loss on drying≤5.0%
Particle size≥95% through 80 mesh
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₈H₁₄MgO₁₀
CAS778571-57-6
Marker setMagnesium L-threonate (98.0–102.0%, dried basis); Mg 7.2–8.3%
AppearanceWhite to off-white crystalline powder
SolubilityFreely soluble in water; the 5% solution is slightly acidic to alkaline (pH 5.8–9.0).

Primary method Titration — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the salt and the isomer: magnesium L-threonate is not magnesium threonate as a generic mixture.
  • Ask for both the salt assay and the elemental magnesium figure; the label may declare either.
  • The magnesium content is low, so the capsule fill is driven by the salt dose, not by the magnesium percentage.
  • Confirm the pH and the water content; both affect the blend and the capsule fill.

Buyer questions

Practical answers

What is Magnesium L-Threonate specified to?

Magnesium L-threonate (dried basis): 98.0–102.0% (titration). The full specification adds Magnesium (Mg), Appearance, Identification, pH (5% solution), Loss on drying and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Magnesium L-Threonate is this?

The catalog grade is Magnesium L-threonate, crystalline. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Magnesium L-Threonate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.