Magnesium chloride is deliquescent; the pack decides the shelf life
Magnesium chloride hexahydrate is deliquescent, and that one property shapes the rest: at ordinary warehouse humidity it draws water from the air, the water line on the certificate rises, and the powder can cake or turn into a slurry. A sealed foil pouch or a lined drum holds it; an open liner in a humid filling room does not. The chemistry is stable, but the water content is not, and the pack is what keeps the two apart.
Magnesium chloride hexahydrate is deliquescent, so the foil, the liner and the dose-room humidity decide the shelf life as much as the chemistry does.
The powder: water, deliquescence and the pack
The catalog allows 45.0–55.0% water against a theoretical 53.2% for the hexahydrate, and that range is a two-sided gate. A lot near the top has picked up surface water; a lot near the bottom has lost part of its water of crystallisation, and its magnesium figure per gram is correspondingly higher. The magnesium line and the water line have to be read together, as the COA page sets out.
The deliquescence point is the number to keep in mind. Above roughly one-third relative humidity at room temperature, the solid draws water until it forms a saturated solution on its surface. A warehouse at 50–60% relative humidity is above that point all year, so the sealed pack is doing the work, not the ambient air. Once the pack is open, the clock starts: the powder gains weight, the surface becomes sticky, and the flow that the filling line depends on disappears.
The pack has to be a moisture barrier, not a bag. A foil laminate with a heat seal is the practical construction for the 1 kg pouch; a clear film or a paper sack is a retail look, not a barrier. The 25 kg fiber drum relies on its inner liner, and the liner has to be closed between uses. A desiccant can dry the headspace, but it cannot compensate for a laminate with a pinhole or a liner that was left open overnight.
The solution: chloride, corrosion and taste
The hexahydrate is very soluble and gives a clear, salty-bitter solution. That is convenient for a stick pack and awkward for a plant: chloride solutions are aggressive to stainless steel, and a magnesium chloride line can pit 304 parts that a sulfate line would leave alone. 316L contact parts, short hold times and a cleaning regime that removes the residue belong in the process description, not only in the maintenance schedule.
The solution is also a growth medium. Magnesium chloride does not preserve a beverage at the concentrations used for a mineral dose, and a clear liquid at neutral pH with no other hurdle is a microbiological risk. If a liquid is unavoidable, validate the hold time, the preservative system and the fill temperature, and check the chloride attack on the filler and the pump seals at the same time.
In an alkaline matrix, magnesium can precipitate as the hydroxide and show up as haze or sediment rather than as an assay loss. The pH window has to be tested in the real formula; a bench solution at neutral pH does not predict a drink buffered at pH 10.
What drives change
| Factor | Effect | Control |
|---|---|---|
| Humidity above about 33% | Water uptake, caking, weight gain | Foil laminate, sealed liner, dry store |
| Very dry air | Partial dehydration; magnesium figure rises | Keep the pack closed; avoid long dry holds |
| Heat | Faster uptake, faster corrosion in solution | Controlled store; cool process |
| Chloride in solution | Pitting of stainless steel; metal pick-up | 316L contact parts; short hold; cleaning regime |
| Alkaline matrix | Magnesium hydroxide haze or sediment | Trial the matrix pH; buffer if needed |
| Open pack | Humid headspace; repeated opening | Single-use pouches; reseal; desiccant where needed |
The factors reinforce each other. A warm, humid store raises the uptake rate, and an opened pouch adds a fresh humid headspace at every scoop. The useful question is not whether magnesium chloride is stable, but how much water the pack lets in over the shelf life and what that does to the powder.
A stability protocol for the ingredient
A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a humidity challenge at the deliquescence point, because a sealed pouch that passes at 60% relative humidity can still fail at 75%.
Weigh the pouch as well as testing the powder. A weight-gain curve is the most sensitive line for a deliquescent salt: 0.5% on a 1 kg pack is 5 g of water, which is easy to measure and hard to hide. Test magnesium, water, chloride, appearance and microbiology at each point, and report the individual results rather than a pass statement. Sample points at 0, 1, 3, 6, 12 and 24 months suit a bulk ingredient; the pack and the climate set the final schedule.
The finished formula changes the answer
A capsule or tablet protects the powder from the room, but not from the excipients. The shell and the filler can carry water, and a hygroscopic fill can pull water through the shell over months. Check the fill's water figure and the capsule's appearance after storage, not only at release; a tight HDPE pack with a desiccant, or a blister, is usually needed for a deliquescent fill.
A stick pack lives or dies on its seal. A foil laminate with a pinhole lets humid air into a small headspace, and the powder has nowhere to shed the water. Inspect the strip as well as the powder. In a gummy or a chew, the water activity of the matrix and the salty-bitter taste dominate; the salt is no longer the moisture sink it is in a dry blend.
How the shelf life is set
We do not publish a single shelf-life number for magnesium chloride, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack, with the water gain and the magnesium figure as the trend lines. A number without a pack, a condition and a test panel is not a shelf life.
After the retest period, re-assay the retained sample before extending use, and check the water figure against the 55.0% limit. Do not carry a bulk figure across to a repacked pouch. The product hub lists the standard packs; the MOQ page covers the pouch and the drum; the titration note describes the magnesium assay; the quality page describes the release and retest workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation