05 Compliance

The regulatory file for magnesium chloride

Technical document 05 · Reviewed 2026-11-19 · Magnesium Chloride

On this page
  1. The four checks
  2. European Union
  3. United States
  4. United Kingdom
  5. Contaminants and limits
  6. Label and claims
  7. The document pack
  8. Checklist before the first order

Selling magnesium chloride into a market comes down to four separate questions: what the material is, which route covers it, whether the contaminants fit the finished dose, and whether the label and the claim are allowed. The certificate answers the first only. The buyer's regulatory team confirms the route for the destination, because the additive route and the supplement route are not the same file.

In one line

The specification describes the salt; the regulatory file shows the route, the limits and the label that apply where the finished product is sold.

The four checks

A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own.

The file should also carry the statements the importer will ask for: allergen and GMO positions, origin, the contaminant results and the packaging description. Name any missing statement before the order, not at the port. A document list with version numbers beats a folder of undated PDFs.

European Union

The EU file is built from the specification, the contaminant results and the label. General food law (Regulation (EC) No 178/2002) sets the framework; labelling follows Regulation (EU) No 1169/2011; contaminants fall under Regulation (EU) 2023/915, which replaced the earlier contaminant regulation; food supplements are covered by Directive 2002/46/EC. The buyer's regulatory team identifies the route for the destination member state and confirms that the form in the specification is the form the file covers.

Magnesium chloride can arrive through more than one route. Where the destination classifies it as a food additive, the additive file applies; where it is a mineral source in a supplement, the supplement file applies. The two have different lists, purity expectations and labelling consequences, and the same drum can be filed under one and not the other. That decision belongs to the buyer's team.

The nutrition declaration names magnesium in milligrams and as a share of the 375 mg reference intake for adults. The ingredient list names the salt, magnesium chloride, and the hydrate state belongs in the specification behind the label. The current consolidated texts are the reference.

United States

The US file runs through the dietary-supplement framework. The seller has to be able to show that the material is a lawful dietary ingredient for the intended use, and that basis belongs in the supplier file rather than in an assumption. Premarket approval is not part of the route, but the label, the claims and the manufacturing records still are; 21 CFR 111 sets the current good manufacturing practice expectations for a supplement.

The Supplement Facts panel declares elemental magnesium against a 420 mg Daily Value for adults and children four years and older, as of this review, while the ingredient list names magnesium chloride. A product that blends two magnesium sources has to name both. A structure/function statement in the US is the brand's statement, not the supplier's, and it carries the DSHEA disclaimer.

United Kingdom

Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's regulatory team confirms which of the two applies to the destination and keeps the evidence with the order.

Contaminants and limits

The contaminant panel is a finished-product calculation, not only a drum result. The table below is the usual starting point for a food-supplement file, as of this review; the current destination text and the daily dose decide the final limit.

Contaminant limits to confirm for the finished product
ElementEU supplement referenceUS referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplement as soldNo federal supplement limit; state rules applyLot result, method, limit and the finished-dose calculation
Cadmium (Cd)1.0 mg/kgNo federal supplement limitLot result and any category exception that applies
Mercury (Hg)0.10 mg/kgNo federal supplement limitLot result and method
Arsenic (As)No EU-wide supplement figure; national rules varyNo federal supplement limitThe agreed limit, the method and the finished-dose calculation

The dilution factor decides whether the raw-material result is enough. Magnesium chloride is often a large share of a capsule or a stick pack, so there is little other mass to absorb its contribution; a raw-material ceiling that looks comfortable on the drum can be close to the finished limit in a high-dose sachet. Run the sum before the first order: multiply the lot result by the salt's share of the serving and compare it with the finished-product limit.

Chloride is not a contaminant here; it is the counter-ion and part of the identity. Sulfate and bromide are different: they are plausible companions in a brine or seawater source, they are not in the catalog, and a buyer who needs them controlled should ask for the results and write the ceiling into the specification.

Label and claims

The label names the material, the quantity and the form the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market. In the EU, magnesium claims are made under Regulation (EU) No 432/2012 and each one carries its own conditions; in the US, a structure/function statement carries the DSHEA disclaimer. Neither market allows a disease-related claim.

This page makes no health claim for magnesium chloride. It describes the material, the analytical evidence and the regulatory framework; the claim belongs to the brand that prints it and to the market that authorises it. “The hexahydrate is used in capsules and sticks” describes the ingredient, not a health effect.

The document pack

  • Batch certificate covering assay and its basis, magnesium, water, chloride, the contaminant panel and microbiology.
  • Specification and technical data sheet naming the hydrate, the mesh and the pack.
  • A safety data sheet in the current format.
  • Allergen, GMO and origin statements; for an inorganic salt these are statements of absence and source, not risk assessments.
  • Sulfate and bromide results where the source is brine or seawater.
  • Packaging and storage statement covering the foil pouch, the drum liner and the humidity limits.
  • Specification revision and change-control record.

Checklist before the first order

  • The hydrate, CAS number and specification version are named.
  • COA, TDS, SDS, allergen, GMO and origin statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label and the claim have been reviewed for the destination.
  • The pack and the storage condition are written into the specification.
  • The source, process and specification are under change control.

The product page carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the EU regulatory summary gathers the instruments; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation