02 Grade comparison

Hexahydrate, anhydrous or flakes: choosing a magnesium chloride grade

Technical document 02 · Reviewed 2026-11-19 · Magnesium Chloride

On this page
  1. Why the grade question comes first
  2. The forms side by side
  3. Deliquescence, solubility and flow
  4. The magnesium arithmetic and the label
  5. What to write into the specification
  6. When another form is the wrong choice

Magnesium chloride is sold as the hexahydrate, as the anhydrous salt, and as powder or flakes, and the trade name does not distinguish them. The hydrate state is the first decision because it sets the magnesium figure per gram at about 12% for the hexahydrate and about 25.5% for the anhydrous salt. The physical form is the second decision, because a flake and a 40 mesh powder behave differently in a hopper and in a capsule.

In one line

The hydrate state is the grade decision: it moves the magnesium figure per gram from about 12% to about 25.5% before the powder or the flake is chosen.

Why the grade question comes first

The catalog line here is magnesium chloride hexahydrate, MgCl2·6H2O, CAS 7791-18-6, a white deliquescent powder or flake with 11.5–12.5% magnesium and 45.0–55.0% water. That line describes one hydrate and one physical family. The anhydrous salt, MgCl2, is a different material with a different formula, a different magnesium figure and a much stronger affinity for water.

The water in the hexahydrate is not a coating or a residual solvent. It is part of the crystal: six water molecules for every magnesium ion, which is why the formula weighs 203.3 g/mol rather than 95.2 g/mol. Changing the hydrate changes the mass per mole, and with it the mass of powder that delivers a given magnesium dose.

The physical form sits underneath the hydrate decision. A powder and a flake can come from the same crystalliser and carry the same water figure; they differ in bulk density, flow and the time they take to dissolve. A specification that names only “magnesium chloride” has fixed neither the hydrate nor the form, and two suppliers can quote two different materials against it.

The forms side by side

Magnesium chloride forms and their magnesium figures
FormFormulaMagnesium (theoretical)Water of crystallisationHandling
Hexahydrate powderMgCl2·6H2O11.96%53.2%Deliquescent; 40 mesh powder
Hexahydrate flakesMgCl2·6H2O11.96%53.2%Deliquescent; slower to dissolve
Anhydrous powderMgCl225.53%NoneStrongly hygroscopic; a separate specification

The anhydrous row is not a drop-in for the hexahydrate. At the same fill weight it delivers about twice the magnesium, so a capsule built on the hexahydrate would be roughly double-strength if the salt were swapped without recalculating the fill. The assay basis is a separate trap: a hexahydrate figure can be reported as the hydrate or as MgCl2 on the dried basis, and the two readings differ by more than a factor of two. The COA page sets out that arithmetic in full.

Deliquescence, solubility and flow

The hexahydrate is deliquescent. Above roughly one-third relative humidity at room temperature it draws water from the air, and at high humidity it can dissolve in the water it has absorbed. A powder has more surface per kilogram than a flake, so it takes up water faster and cakes sooner. Both forms need a moisture-barrier pack, and the difference between them is the rate, not the direction.

Both physical forms are very soluble in water and give a clear, salty-bitter solution. The flake dissolves more slowly because it presents less surface, and it may need longer agitation or a warmer solvent; a flake is not a granule, and milling it changes the particle-size line. The 40 mesh powder is the catalog format for dry blending, where flow and dust are the practical questions.

Flow is where the hydrate bites in production. A powder that has taken up a little water bridges in the hopper and sticks to the auger; a flake that has taken up water clumps in the bag. The dose-room humidity, the time the material sits open and the liner all belong in the specification, because they decide whether the lot that passed the certificate still flows on the line.

The magnesium arithmetic and the label

One gram of the hexahydrate delivers 119.6 mg of magnesium; one gram of the anhydrous salt delivers 255.3 mg. A 100 mg magnesium dose therefore needs 836 mg of the hexahydrate or 392 mg of the anhydrous salt. A 500 mg capsule of the hexahydrate carries about 59.8 mg magnesium, and the same capsule of the anhydrous salt would carry about 127.6 mg.

The water figure moves the number again. At 45% water the powder would carry about 14.0% magnesium; at 55% it would carry about 11.5%. The spec ranges for magnesium and water narrow that window, but the fill weight should still be calculated from the measured magnesium figure on the lot, not from a nominal 12%. A 5% difference in the magnesium figure is roughly a 5% difference in the capsule fill, which is enough to fail a label check.

The label names the salt, magnesium chloride, and the nutrition panel declares elemental magnesium. In the EU the reference intake for magnesium is 375 mg for adults; in the US the Daily Value is 420 mg for adults and children four years and older. The hydrate state belongs in the specification and in the dose calculation, even where the ingredient list does not spell it out.

What to write into the specification

  • “Magnesium chloride hexahydrate, CAS 7791-18-6, MgCl2·6H2O.”
  • “Assay ≥99.0% by complexometric titration, with the basis stated on the certificate.”
  • “Magnesium 11.5–12.5%; water 45.0–55.0% by Karl Fischer.”
  • “Appearance: white powder or flakes; powder at 40 mesh where the dosage form needs it.”
  • “Heavy metals and microbiology as listed; sulfate and bromide reported where the source is brine.”
  • “Pack: 1 kg foil pouch or 25 kg lined drum; store sealed and dry.”

When another form is the wrong choice

The anhydrous salt is the wrong choice for a line that is not set up for a strongly hygroscopic powder: it needs a dry room, sealed transfer and a pack that keeps it dry, and the handling is a project in itself. The flakes are the wrong choice for a direct-compression blend that needs a free-flowing 40 mesh powder, unless the line can mill them. A technical grade is the wrong choice for any food or supplement use, whatever the assay says.

The reverse also holds. A buyer who needs a small, high-potency capsule should not accept the hexahydrate and compensate with a larger fill without checking the label and the market file. The hydrate is part of the identity of the material, not a unit conversion applied at the balance.

The catalog line is on the magnesium chloride product page. The pack and the deliquescence question are on the stability page; the direct comparison with the sulfate is on the level-four page; the lactate is the other highly soluble magnesium salt in the range, and it is described on the magnesium lactate page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation