Magnesium bisglycinate hydrate: MOQ, packs and ordering
This hydrate grade ships from a 1 kg foil pouch; the production unit is a 25 kg fiber drum, and standard dispatch is quoted at 1–7 days after the order is confirmed. The quantity question differs from the anhydrous grade's, because at 11.0–12.5% magnesium a kilogram supplies 110–125 g of the element. At a 100 mg label dose, one pouch therefore covers about 1,100–1,250 servings before excipients.
One kilogram is the trial unit, and because the hydrate carries 11.0–12.5% magnesium the same pack delivers fewer milligrams than the anhydrous grade.
Why the first pack is one kilogram
A kilogram is enough for a bench trial, a retained sample and an independent test, and it is small enough to move as a parcel. It also arrives as a released lot with its own code and certificate. Below that size the material is normally taken from a larger lot, which adds handling and weakens the link between the certificate and the powder in the bag.
The yield per pack is lower than the anhydrous grade's. One kilogram of hydrate at 11.0–12.5% magnesium carries 110–125 g of the element; one kilogram of the anhydrous grade at 13.5–14.2% carries 135–142 g. A 25 kg drum follows the same arithmetic: 2.75–3.125 kg of magnesium in the hydrate drum against 3.375–3.55 kg in the anhydrous drum. The container is the same size; the number of doses is not.
That is why the order quantity should be calculated from the label dose and the certificate result. If a production run needs 10 kg of the anhydrous powder, the same magnesium load needs roughly 11.3–12.8 kg of hydrate, depending on where the lot falls in the water window. The comparison belongs in the quotation, not in the first production batch.
Packs and formats
| Pack | Net weight | Typical use | Handling note |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; close it between weighings |
| Fiber drum | 25 kg | Production | Liner and lot code; keep the liner closed |
| Granulated powder | On request | Tablets and sachets | New particle profile and any granulation aid |
The catalog powder is specified at ≥95% through 80 mesh. A granulated version is a new specification rather than a packing choice, because the particle profile and possibly the excipients change. Both standard packs need a sealed liner: the hydrate is hygroscopic, and the pouch is a moisture barrier only while it is closed.
Dispatch and transit
The standard pack is quoted at 1–7 days after confirmation. That window covers order picking, document preparation and handover to the carrier; transit, customs clearance and the customer's own quality release sit outside it. A non-standard mesh, a granulation or a repack adds its own time, which the quotation should show as a separate line.
Ask for the ship date rather than the range alone. A single pouch usually travels as a parcel and a 25 kg drum as a pallet, while the Incoterm decides who books the movement and who clears entry. The lot documents should be in the same shipment as the powder. If the material is needed for a production date, add the customer's release time to the plan as well as the transit time.
What a quotation needs
Six details make an offer comparable:
- Grade and identity. Magnesium bisglycinate hydrate, CAS 14783-68-7, with the hydrate named in the description.
- Release specification. Magnesium 11.0–12.5% as-is, loss on drying 8.0–14.0%, the 1:2 ratio, mesh and contaminant panel.
- Order size and presentation. The 1 kg pouch, the 25 kg drum, or a granulated grade.
- Delivery. Destination and Incoterm.
- Paperwork. COA, specification and technical data sheet, SDS, and any destination-specific declaration.
- Use and market. Supplement, food or another use, and the country of sale.
An offer that omits the hydrate name and the water limit may be for the anhydrous grade, since both catalog records carry the same CAS number. The quotation should also cite the specification revision, so the certificate and the offer can be checked against one document.
The 1 kg pack is the qualification unit
Before scaling, test magnesium, loss on drying, glycine and the ratio, the heavy metals and the microbiology on the sample. Keep part of the same pack as a retained sample, and make sure the lot code on the sample, the certificate and the quotation agree. Without that link, the powder is a demonstration rather than a qualification.
A bench trial that uses less than a kilogram is a repack. It comes out of a bulk lot, receives its own handling record, and should not be described as the catalog pouch. Ask for the split in writing and keep the split lot code with the trial data. Even with an identical specification, the trial powder and the production drum can come from different lots.
Terms to settle before the first order
Put the commercial and quality terms in one document: Incoterm, pack, dispatch window, specification revision, one COA per lot, the retained sample, the retest period and the change-control route. A quality agreement signed before the first production order is easier than a negotiation after a problem.
If a lot falls outside the agreed specification, the first step is a joint re-test of the retained sample against the named method. The agreement should name the referee laboratory and say who carries its cost. A rejection based only on colour is difficult to support for either side, because the off-white window is wide and drying can shift the tint.
The hydrate product page carries the catalog specification; the anhydrous grade is a separate purchase; the COA page lists the release tests; the methods library describes the assays; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation