Minerals & Electrolytes · Core range
Magnesium Bisglycinate Hydrate
C₄H₈MgN₂O₄·xH₂O · CAS 14783-68-7 · Magnesium bisglycinate hydrate, powder
Magnesium bisglycinate hydrate specified at 11.0–12.5% magnesium with a 1:2 magnesium–glycine ratio and 8–14% water; the hydrate and the ratio are the specification.
- Magnesium (complexometric)
- 11.0–12.5%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Magnesium (complexometric) | 11.0–12.5% |
|---|---|
| Glycine (HPLC) | 1:2 Mg : glycine ratio |
| Loss on drying | 8.0–14.0% |
| Appearance | White to off-white powder |
| Identification | Glycine and Mg conform |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Particle size | ≥95% through 80 mesh |
| Chemical formula | C₄H₈MgN₂O₄·xH₂O |
| CAS | 14783-68-7 |
| Marker set | Magnesium 11.0–12.5%; Mg : glycine 1:2 |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Soluble in water; the solution is clear to slightly opalescent. |
Primary method Complexometric titration (Mg), HPLC glycine and loss on drying — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Magnesium Bisglycinate Hydrate. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the hydrate: the anhydrous chelate and the hydrate are different products with different magnesium content and fill weight.
- Ask for the magnesium figure, the glycine ratio and the water; the three together identify the grade.
- The material is hygroscopic; the pack and the storage condition belong in the specification.
- Do not use the page as a label or a claim: the finished product's status is a separate legal question.
Buyer questions
Practical answers
What is Magnesium Bisglycinate Hydrate specified to?
Magnesium (complexometric): 11.0–12.5%. The full specification adds Glycine (HPLC), Loss on drying, Appearance, Identification, Heavy metals and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Magnesium Bisglycinate Hydrate is this?
The catalog grade is Magnesium bisglycinate hydrate, powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Magnesium Bisglycinate Hydrate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.