05 Regulatory compliance

The regulatory file for magnesium bisglycinate hydrate

Technical document 05 · Reviewed 2026-11-20 · Magnesium Bisglycinate Hydrate

On this page
  1. Four checks and one file
  2. European Union
  3. United States
  4. Contaminants and the finished-product calculation
  5. Claims
  6. Documents for the file
  7. Checklist before the first order

The compliance file for magnesium bisglycinate hydrate has to connect one specification to four destination questions: whether the form is on the permitted list, whether the contaminants fit the limit at the finished dose, whether the label names the hydrate correctly, and whether the claims are authorised. The catalog material is a 1:2 magnesium–glycine chelate at 11.0–12.5% magnesium with 8.0–14.0% water, and that hydrate description has to survive from the technical data sheet to the label. The buyer's regulatory team confirms the route for the destination; this page names the framework and the documents.

In one line

The specification describes a magnesium chelate hydrate; the destination file has to show the permitted-list entry, the contaminant calculation and the label wording that apply.

Four checks and one file

The first check is the ingredient identity: magnesium bisglycinate, 1:2 chelate, hydrate grade, CAS 14783-68-7. The second is the permitted-list route in the destination market. The third is the contaminant calculation, which starts from the lot result and ends at the finished dose. The fourth is the label and claim review, which belongs to the brand that puts the product on the market.

The file that supports those checks contains the specification and technical data sheet, the batch certificate, the safety data sheet, the source and process description, the allergen, GMO, origin and residual-solvent declarations, the label artwork and the buyer's written confirmation of the destination route. None of those documents decides the route on its own; together they show that the material and the market file describe the same product.

European Union

In the EU, the route for a magnesium source in a food supplement runs through the permitted lists of Directive 2002/46/EC and the national notification procedure that sits alongside it. The buyer's regulatory team confirms which entry applies and whether the hydrate description matches the named substance. The specification should use the same name as the market file, so that the certificate and the label do not describe two different materials.

On top of the permitted-list question, Regulation (EU) No 1169/2011 governs the food information and the ingredient list, Regulation (EU) 2023/915 sets the contaminant limits, and Regulation (EU) No 432/2012 governs the authorised magnesium claims. These texts can change, so the current consolidated version is the reference as of this review. The analytical methods behind the certificate are described in the methods library; the quality page explains how the lot file is assembled.

United States

In the US, the question is whether the exact form is a lawful dietary ingredient under DSHEA. Magnesium is an essential nutrient, but that fact alone does not establish the status of a particular chelate. The supplier documents the basis it relies on, whether that is a pre-DSHEA use, a GRAS conclusion for the intended use, or a new dietary ingredient notification, and the buyer checks that the basis extends to the finished product.

The label follows the Supplement Facts format in 21 CFR 101. The panel declares elemental magnesium against the Daily Value, and the source is named in parentheses, for example “magnesium (as magnesium bisglycinate hydrate)”. A structure/function statement belongs to the brand, needs substantiation, and has to carry the DSHEA disclaimer. The buyer's regulatory team confirms the wording; the certificate does not approve a claim.

Contaminants and the finished-product calculation

The contaminant limit applies to the product as sold, not to the drum in isolation. The lot result has to be converted through the dose. A 100 mg elemental magnesium dose at 11.75% magnesium is about 851 mg of powder; at a lead limit of 3.0 mg/kg, that powder can contribute at most about 2.55 µg of lead before the excipients add their share. The calculation, not the certificate alone, shows whether the finished product fits.

Contaminant references to confirm · food supplements
ElementEU referenceUS referenceUK reference
Lead3.0 mg/kgNo supplement-specific federal limit; state rules may applyRetained EU figure; verify current UK law
Cadmium1.0 mg/kgNo supplement-specific federal limitRetained EU figure; verify current UK law
Mercury0.10 mg/kgNo supplement-specific federal limitRetained EU figure; verify current UK law
ArsenicNot harmonised at EU level; a Member State may set its own figureNo supplement-specific federal limitVerify current UK law

California Proposition 65 is a separate layer: a supplement inside the EU figure can still need a California warning at a low daily intake. Destination, daily dose and excipient load have to be checked together. The numbers above are a starting point for the file, not legal advice, and the current text of each instrument is the reference.

Claims

In the EU, authorised magnesium claims exist under Regulation (EU) No 432/2012, and each one carries conditions on the wording and the dose. The brand's reviewer applies the exact authorised text and checks that the product meets its conditions. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. Neither market allows a disease-related claim for the ingredient.

This page makes no health claim. It describes the material, the analytical evidence and the framework; the claim sits with the brand and the destination market, not with this page. A claim revision does not reopen the specification, and a specification change does not approve a claim.

Documents for the file

  • Batch COA with magnesium, loss on drying, glycine and the ratio, heavy metals and microbiology.
  • Specification and technical data sheet naming the hydrate grade, the magnesium range and the water range.
  • Safety data sheet with the standard 16 sections.
  • Allergen, GMO, origin and residual-solvent declarations.
  • Dietary-ingredient basis for the US, where that route is used.
  • Finished-product contaminant calculation and the label artwork.
  • Change-control record for the source, process, pack or grade.

Checklist before the first order

  1. Is the ingredient named as magnesium bisglycinate hydrate, with CAS 14783-68-7 and the specification version?
  2. Does the destination file cover the permitted-list entry and the hydrate description?
  3. Are the contaminant results converted to the finished dose, including the excipients?
  4. Does the label declare elemental magnesium and name the hydrate as the source?
  5. Is every claim authorised, or is it a substantiated structure/function statement with the required disclaimer?
  6. Are the specification, the certificate and the quotation on the same revision?

The catalog specification is on the hydrate product page; the other grade is on the anhydrous page; the release tests are on the COA page; analytical methods are in the methods library; the lot file is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation