02.1 Gluconate vs bisglycinate

Ferrous gluconate vs ferrous bisglycinate: iron content, oxidation and the label

Technical document 02.1 · Reviewed 2026-11-18 · Ferrous Gluconate

On this page
  1. A salt and a chelate
  2. The iron arithmetic
  3. Oxidation is a property of both
  4. What changes in the blend
  5. The regulatory entries differ
  6. When to choose which

Ferrous gluconate and ferrous bisglycinate are both ferrous iron sources, but they are different molecules with different iron fractions. The gluconate dihydrate carries 11.8–12.5% iron; the bisglycinate carries about 20–23% in the commercial grades. Switching changes the mass per dose, the oxidation behaviour in the blend and the ingredient name on the label.

In one line

Gluconate carries about 12% iron and bisglycinate about 20%, so switching changes the fill weight, the oxidation story and the ingredient line.

A salt and a chelate

Ferrous gluconate is the iron(II) salt of gluconic acid: one ferrous ion and two gluconate anions, C₁₂H₂₂FeO₁₄·2H₂O, at 482.17 g/mol for the dihydrate. Ferrous bisglycinate is a chelate: one ferrous ion held by two glycine molecules through a nitrogen and an oxygen each, C₄H₈FeN₂O₄ at 203.96 g/mol for the anhydrous form. Both are Fe(II), both are powders, and both are described as iron sources — but the ligand, the mass and the solution chemistry differ.

The word “chelate” describes the ring structure, not a grade or a strength. The gluconate is not a chelate, and no wording turns it into one. Conversely, the bisglycinate is not a gluconate with more iron; it is a different molecule with its own identity tests and its own regulatory entry.

Commercial bisglycinate lands at about 20–23% iron rather than the 27.4% of the anhydrous formula, because the commercial solid is a hydrate and the grade is specified on that basis. That is normal, and the supplier's certificate is the figure that counts. The gluconate's 11.8–12.5% is a dried-basis range on the dihydrate, as the COA page explains.

The iron arithmetic

Salt mass for a 20 mg iron claim, and iron in a 500 mg fill
SourceElemental FeSalt for 20 mg FeFe in a 500 mg fill
Ferrous gluconate dihydrate11.8–12.5%160–169 mg59–63 mg
Ferrous bisglycinate20–23%87–100 mg100–115 mg
Ferrous fumarate32.9%61 mg164 mg

A 20 mg claim takes roughly 165 mg of gluconate or 95 mg of bisglycinate; a 100 mg claim takes about 800–847 mg of gluconate but about 435–500 mg of bisglycinate. At a fixed capsule fill, the gluconate delivers less iron per milligram of powder, so the same claim needs more mass or more capsules. At a fixed claim, the bisglycinate leaves more room for other actives.

The label declares iron, not the salt, so the salt mass is an internal number. It still decides the capsule size, the number of capsules and the space left for the rest of the formula. The grade page sets out the other salts in the same arithmetic.

Oxidation is a property of both

Both materials are ferrous, and both oxidise to ferric when moisture, heat and oxygen reach them. The difference is rate and visibility. The chelate holds the ferrous ion in a ring, which slows the reaction in a moist blend; it does not stop it, and commercial bisglycinate specifications commonly carry a ferric limit for that reason. The gluconate has no such ring: dissolved ferrous iron is free to react, and the cerimetric assay is the control.

Colour behaves differently. Ferrous gluconate moves from greyish-yellow to yellow-brown as it oxidises; ferrous bisglycinate is darker to begin with, grey-green to brown, so a colour shift is harder to read. Neither powder is stable in an open pack, and neither can be judged by appearance alone. The stability page covers the storage and matrix variables.

What changes in the blend

The gluconate solution is acidic, at pH 3.0–5.0 for a 5% solution; the chelate is not, so the two behave differently beside acid- or alkali-sensitive actives. Alkaline excipients can raise the pH around a gluconate particle and precipitate ferrous iron; the chelate keeps the iron in solution over a wider pH range, though it too has limits. Neither behaviour is a claim about the finished product; both are reasons to test the blend rather than the salt alone.

Iron is an oxidation catalyst in either form, so a blend containing fats or sensitive vitamins has to be followed for its own colour and assay, not only for iron. The gluconate adds acidity and a pale colour to a stick or drink mix; the chelate adds a darker colour and a different taste profile. The flavour and the packaging have to carry whichever one is used.

The regulatory entries differ

In the EU both forms appear in Annex II to Directive 2002/46/EC: ferrous gluconate and ferrous bisglycinate are separate entries, and the label must name the one that was used. In GB the retained list carries both. In the US, ferrous gluconate is affirmed as GRAS for use as a nutrient supplement under 21 CFR 184.1308, with the Food Chemicals Codex specification; ferrous bisglycinate does not have that paragraph, and its basis sits in the supplier's regulatory file. In every market the label declares iron in milligrams, not the salt, and the ingredient list names the source. The compliance page sets out the limits and documents.

When to choose which

Choose the gluconate when the label names ferrous gluconate, when the fill can carry 160–170 mg of powder for a 20 mg claim, and when an acidic, soluble salt suits the matrix. Choose the bisglycinate when the label names the chelate, when the fill is tight, or when the formula needs the iron held in a ring rather than free in solution. Choose neither when the matrix needs a ferric or elemental source: ferric pyrophosphate and carbonyl iron are different tools for different jobs.

The decision is not which molecule is better in general. It is which molecule the label, the fill and the matrix can carry, at the iron figure the claim requires. A change of salt is a change of specification, identity test, label and often capsule size — not a substitution of one powder for another at the same weight.

The catalog line is on the ferrous gluconate product page; the identity page shows how the ferrous salt is proved; the iron pyrophosphate page covers the ferric alternative; and the chelate glossary entry explains the ring that separates the two.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation