Where ferrous gluconate is permitted, and what the file must show
Ferrous gluconate is a permitted iron source for food supplements in the European Union, the United States and the United Kingdom. Permission attaches to the form, not to the dose or to a claim. The file has to show the form, the level, the contaminants and the label, and each market asks for them in a different document.
Ferrous gluconate is a permitted iron source in the EU, the US and the UK, and the file has to show the form, the level and the label.
Three questions, not one
Compliance for an iron salt splits into three questions that are often answered as if they were one. Is the form permitted in this market? Is the amount allowed in this product? Does the label and the claim match what was used? A permitted form says nothing about the maximum dose, and a compliant dose says nothing about the wording on the pack.
This page covers the raw-material side and the file around it: identity, specification, contaminants, documents and the label checks a buyer has to make. The finished product's dose, matrix and label copy belong to the brand.
European Union
Iron sources for food supplements are listed in Annex II to Directive 2002/46/EC, as amended. Ferrous gluconate is on that list, and the same list governs the iron forms that may be added to foods under Regulation (EC) No 1925/2006.
The EU harmonises the list of forms, not the maximum amount of iron in a supplement. Maximum levels are set by Member States, and they differ, so the target market has to be named before the dose is fixed. The EU regulatory note sets out the framework and the Member State variation.
Contaminants sit in Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. Labelling follows Regulation (EU) No 1169/2011: the ingredient list names the iron source, and the nutrition declaration reports iron in milligrams and as a percentage of the 14 mg reference intake. Claims follow Regulation (EC) No 1924/2006 and the authorised list.
United States
Ferrous gluconate is affirmed as generally recognised as safe for use as a nutrient supplement under 21 CFR 184.1308, with no limitation other than current good manufacturing practice, and the regulation points to the Food Chemicals Codex for the specification. A dietary supplement containing it is made under the supplement cGMPs in 21 CFR 111; there is no pre-market approval of the ingredient or the product.
The Supplement Facts panel declares iron in milligrams and as a percentage of the 18 mg Daily Value, and the ingredient list names the source. The figure is visible to the consumer and has to be supported by the formula arithmetic.
The US has no federal maximum level for lead, arsenic, cadmium or mercury in dietary supplements. State regimes, customer specifications and voluntary compendial standards such as USP <2232> fill that gap, so the catalog limits are a buyer requirement as much as a legal one. Structure/function claims are allowed with the required notification and wording; disease claims are not.
United Kingdom
GB retained the food-supplement framework after IP completion day. The permitted iron list in the retained Annex II includes ferrous gluconate, and the Food Supplements (England) Regulations 2003 and their devolved equivalents provide the domestic instrument. Nutrition labelling and claims follow the retained versions of Regulations 1169/2011 and 1924/2006.
Contaminant limits are also retained, but the EU has recast its rules into 2023/915 while GB maintains its own text. The numbers have tracked closely, and divergence is possible; check the current GB instrument rather than assuming the EU figure. Northern Ireland continues to apply the EU list under the Windsor Framework, so a pack sold across the Irish Sea can face two regimes.
The limits, side by side
| Parameter | EU food supplement | US federal | Catalog limit |
|---|---|---|---|
| Lead (Pb) | 3.0 mg/kg | No maximum level | ≤3 mg/kg |
| Cadmium (Cd) | 1.0 mg/kg | No maximum level | ≤1 mg/kg |
| Mercury (Hg) | 0.10 mg/kg | No maximum level | ≤0.1 mg/kg |
| Arsenic (As) | No maximum level | No maximum level | ≤2 mg/kg |
| Microbiology | General food-safety duty | cGMP; no numeric limit | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The catalog limits for lead, cadmium and mercury are the EU maximum levels themselves, which leaves no headroom. The maximum level applies to the food as sold, so a supplement built mostly from this powder has nowhere to put a second contributor; a formula with several mineral sources needs a tighter raw-material limit or a dilution calculation. Arsenic at ≤2 mg/kg is a buyer limit: the EU sets no general maximum level for arsenic in supplements.
Where the claim boundary sits
The EU and GB registers carry authorised claims for iron, and they attach to the nutrient in the finished product, in the authorised wording and under the stated conditions of use. They do not attach to the raw material, and they are not a description of the salt. “Ferrous gluconate” is an ingredient name; it is not a health claim.
No disease claim is permitted in any of the three markets. In the US a structure/function claim needs the notification and the disclaimer that the rules require, and it still cannot describe a disease. This page makes no health claim for the material; the label copy belongs to the brand and its regulatory reviewer.
The document set
| Document | What it must show | Scope |
|---|---|---|
| Certificate of analysis | Lot, tests, methods, limits, results and basis | Every lot |
| Specification | The agreed identity, assay, physical and contaminant limits | Per product |
| Technical data sheet | Identity, typical values, solubility, packing and storage | Per product |
| Safety data sheet | Hazard, handling and transport information | Per product |
| Allergen and GMO statements | Declarable allergens and GM status | Per product |
| Manufacturing flow and origin | Site, route and country of origin | Per supplier |
| Certification | Quality or food-safety certificate, if held | Per site |
A certificate alone is not a file. The specification is what the certificate is written against, and the statements are what the brand needs when its own customer asks.
Release checklist
- Form and hydrate named, with the CAS number, on the certificate and the label.
- Iron range stated on the dried basis, with the cerimetric method and the loss-on-drying result.
- Ferric iron or colour reported, not only the ferrous assay.
- Contaminants compared with the destination's limits, not with a generic panel.
- Microbiology within the catalog limits, with the absence tests named.
- Label ingredient name matches the permitted list; iron declared in mg and as the reference percentage.
- Claims limited to authorised wording; no disease claim anywhere in the file.
- Documents complete for the lot, and the retained sample identified by the same lot code.
The COA page shows where each figure sits on the certificate; the identity page covers the tests behind the form; the quality page describes the release file; and the product page carries the catalog specification.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation