02 Grade comparison

Squalane grades: source, hydrogenation and use

Technical document 02 · Reviewed 2026-11-20 · Squalane

On this page
  1. Three decisions behind the word grade
  2. The grades side by side
  3. One oil, one set of handling rules
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When another grade or another material is right

Squalane is not a single commodity: the market offers it by feedstock, by how completely it was hydrogenated, and by the use it is documented for. The catalog grade is olive-derived, ≥95.0% by GC, with an iodine value ≤1.0 g I₂/100 g. A different feedstock, a higher assay or a partly hydrogenated lot is a separate specification, and there is no powder grade in this catalog.

In one line

The grade of squalane is the source plus the hydrogenation endpoint plus the use grade; the catalog material is olive-derived, at least 95% by GC, with an iodine value at or below 1.0.

Three decisions behind the word grade

The first decision is the feedstock. Squalane is produced by hydrogenating squalene, and the squalene may come from olive-oil refining, from a synthetic route or from other plant and marine sources. All routes give C30H62, but the minor hydrocarbons that survive refining and the traceability documents behind them differ. “Olive-derived” is therefore a supply-chain statement as much as a chemical one.

The second decision is the reaction endpoint. Hydrogenation is a catalytic process, and how far it runs is measured by the iodine value. A lot at or below 1.0 is fully saturated; a lot above it retains double bonds and behaves more like squalene on the shelf. A result of 0.9 passes the catalog gate without much margin, and a lot at 0.2 is a different proposition.

The third decision is the use. The same oil can be documented as a cosmetic ingredient or as a food or supplement ingredient; the molecule does not change, but the safety file, the source statement and the label position do. A grade name that does not state the use leaves the buyer to guess which file applies.

The grades side by side

Squalane grades and the neighbouring material
GradeIdentity and sourceIodine valueAssayWhat changes
Catalog oilSqualane, CAS 111-01-3, olive route≤1.0 g I₂/100 g≥95.0% by GCThe standard specification and the two standard packs
Tighter assayThe same molecule, a narrower peak≤1.0 g I₂/100 gAbove the catalog gateA separate specification, refining history and certificate
Partly hydrogenatedResidual double bonds remainAbove 1.0May still pass the assay gateA different shelf behaviour; outside the catalog gate
Synthetic feedstockSame formula, non-olive route≤1.0 g I₂/100 g—Feedstock traceability and impurity profile
Topical-use separationThe same oil, separated for topical use≤1.0 g I₂/100 g≥95.0% by GCThe document set and the grade name, on request
SqualeneCAS 111-02-4, unsaturated350–380 g I₂/100 g≥90.0% by GCUnsaturation, stability, analysis and the label name

The partly hydrogenated row is the one that trips buyers: it can carry a 95% assay and still fail the iodine-value line, because the assay counts the main peak while the titration counts the double bonds. The synthetic row is a legitimate source with its own traceability chain, not a dilution. Squalene is a separate substance rather than a purer grade of the same oil.

One oil, one set of handling rules

Squalane is a clear, colourless to pale yellow oil with almost no odour. It is lighter than water, insoluble in it, and freely miscible with vegetable oils, esters and many non-polar solvents. The refractive index sits at 1.450–1.455, the density at about 0.81 g/mL, and the oil remains liquid at ordinary storage temperatures. Those properties suit an oil phase, a softgel fill or a topical base, and they make an unemulsified addition to a water-based drink impractical.

Not needing an antioxidant package is not the same as needing no care. Keep the oil in the amber bottle or the closed drum, keep the headspace small and the store cool, and protect the neck and closure from dust. A drum that is opened repeatedly in a humid room will pick up water, and the moisture line is a release gate at ≤0.1%.

There is no powder grade in this catalog. A formulator who needs a free-flowing solid is asking for a carrier-based format, a different product with a carrier, an oil load and its own specification. That request belongs in the quotation conversation, not in an assumption at the bench.

Dose arithmetic and the label

Squalane is a single oil, so the arithmetic is simpler than for a salt or a chelate: there is no counter-ion and no conversion factor between two forms. The factors that matter are the assay, the fill weight and the oil load of any blend. One gram of a 95% oil delivers about 0.95 g of squalane; a 500 mg softgel fill at the same assay carries about 475 mg. In a blend, a 10% inclusion in a 5 g serving delivers 0.5 g of squalane, and the rest of the serving is the other oils.

The label should declare the squalane mass, not the mass of the blend. A softgel fill weight is the oil mass; the shell is weighed separately. For a topical product the use level is set by the formulator and the safety assessment, and the grade's document set has to match the use. None of these figures is a recommended intake; they are the arithmetic that keeps the label, the fill weight and the weigh-up in agreement.

An overage for storage loss is a separate decision. It belongs with the stability data for the finished format, and it does not repair a pack that lets moisture in. The stability page sets out the protocol.

What to write into the specification

  • “Squalane, olive-derived, CAS 111-01-3, C30H62.”
  • “Assay ≥95.0% by GC, with the calibration mode stated.”
  • “GC retention and refractive index 1.450–1.455 at 20 °C for identification.”
  • “Iodine value ≤1.0 g I₂/100 g by Wijs, reported as a measured figure.”
  • “Moisture ≤0.1% by Karl Fischer; metals and microbiology as listed.”
  • “Residual squalene reported, with a limit agreed for the grade.”
  • “Use grade named: cosmetic or food and supplement, with the matching document set.”
  • “Pack: 1 kg amber bottle or 25 kg HDPE drum; storage condition stated.”

When another grade or another material is right

If the brief calls for the unsaturated oil, squalene is the material, not a higher grade of squalane. A squalene lot cannot stand in for squalane when the label names squalane, because the ingredient name, the CAS number and the unsaturation all change. If the application needs a free-flowing solid, no grade of this oil supplies it; a carrier-based product with its own certificate is the answer.

If the use is a food or a supplement, the grade question is not settled by the assay. The document set, the source statement and the route for the destination have to be confirmed before the order, and a cosmetic-grade certificate does not establish a food use. Catalog data is on the product hub; the saturated and unsaturated forms are set out in the level-four comparison; each reported line is explained on the COA page; the unsaturated material has its own squalene page; change control is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation