The regulatory file for squalane
Squalane is usually placed on the market as a cosmetic ingredient, and that route supplies the default file; a food or supplement use is a different route that must be established for the material, the dose and the market. The specification describes the oil, but it does not choose the route. This page sets out the documents and checks that belong in the file, and the buyer's regulatory team confirms the route.
The specification describes the oil, but the use decides the file: a cosmetic route and a food or supplement route do not share the same evidence, and the destination decides which one applies.
Four questions before a document is filed
The file has to answer which material and specification version is being bought, which lot and certificate are being released, which limits and labelling rules apply to the finished product, and how changes to feedstock, process or pack are controlled. The certificate answers the lot question, the data sheet the specification, and the safety data sheet the handling. None of them answers the route question.
The use comes first. A cosmetic ingredient is documented through a safety assessment and a product information file; a food or supplement ingredient is documented through food law and its own labelling rules. The same batch can serve either, but the files are built differently, and a certificate does not move from one to the other without review.
The name is part of the file. Squalane and squalene are distinct substances with distinct CAS numbers, and a document that uses the names as synonyms has not identified the material. Keep the source statement, the allergen and GMO declarations, the residual-solvent statement and a versioned document list at the front of the folder.
European Union
For cosmetic use, Regulation (EC) No 1223/2009 sets the frame: a responsible person, a product information file with a safety report, labelling under the regulation, and notification in the CPNP before the product is placed on the market. The ingredient is assessed in the safety report, and the annexes should be checked for any current restriction. As of this review, the consolidated text is the reference.
For food or supplement use, the framework starts from Regulation (EC) No 178/2002, Regulation (EU) No 1169/2011, Directive 2002/46/EC and Regulation (EU) 2023/915. Hydrogenation does not automatically remove a material from the novel-food framework: its status under Regulation (EU) 2015/2283 has to be checked against the current catalogue and any authorisation for the intended use before the specification is treated as market-ready.
Great Britain applies its own cosmetic and food rules; Northern Ireland follows the EU framework. The delivery address decides which file is needed, and the label should match that decision.
United States
A cosmetic use is governed by the Federal Food, Drug, and Cosmetic Act and the cosmetic labelling rules in 21 CFR 700. No pre-market approval applies to a cosmetic as such, but the brand owns the safety of the product and its ingredients, and a claim that turns the product into a drug changes the analysis. A supplement use brings the dietary-supplement framework, including 21 CFR 111, while a conventional food use needs a food-additive or GRAS basis.
The supplier should state the basis it relies on and identify the supporting document. The buyer checks that the basis reaches the finished product, the dose and the claim, and that the label's source statement is supported. As of this review, the current text governs.
Contaminants and the finished-product calculation
A drum result is not a finished-product result. The table pairs the catalog limits with the checks that a supplement file usually needs; the destination text and the daily dose set the final figure, while a cosmetic route relies on the safety assessment rather than a food limit.
| Parameter | Catalog limit | What the file should add |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Lot result, method and the dose calculation |
| Arsenic (As) | ≤2 mg/kg | The agreed market or customer limit |
| Cadmium (Cd) | ≤1 mg/kg | Lot result; check the category in the current text |
| Mercury (Hg) | ≤0.1 mg/kg | Lot result and method |
| Moisture | ≤0.1% | Haze and shelf-life check on the finished product |
| Process contaminants | — | Mineral-oil and PAH statements where required |
Because the feedstock is a refining stream, process contaminants deserve a direct question. A statement, a result or a justified absence is acceptable, but it should be in the file before shipment. Ask about mineral-oil hydrocarbons and about 3-MCPD esters where the feedstock is a refined oil; those belong to the feedstock and the refining step, not to the hydrogenation.
Convert with the dose. A limit per kilogram of oil and a limit per daily serving are different numbers, and a low inclusion rate can keep a finished product inside a limit that the neat oil would exceed.
Label and claims
The label names the material and the quantity in the form the market requires. For a cosmetic, the INCI name is Squalane and the function is described under the common criteria for cosmetic claims; for a supplement, the claim rules are their own review with their own substantiation.
No disease-related claim is made for this material here, and a certificate does not approve a claim. Squalane and squalene are separate names and are not interchangeable on a label; changing from one to the other requires a new label review. The reviewer confirms the wording against the product, the use and the market.
The document set
Core: specification, lot certificate, technical data sheet and safety data sheet. Cosmetic use adds the ingredient safety assessment and the product information file held by the responsible person. Food or supplement use adds the source declaration, allergen and GMO statements, the residual-solvent statement and any process-contaminant statement the market requires.
The specification should name the source, the assay basis, the iodine-value limit and the pack, and the certificate should match its revision. Halal, kosher and customer-specific declarations are supplied where available rather than assumed. Catalog data sits on the product hub, the certificate is explained on the COA page, the analytical evidence is on the identity page, the unsaturated material has its own squalene page, the tests are introduced in the methods section, and the release file is described on the quality page.
None of this replaces the route decision. The file is complete only when the use, the market and the material are named together.
Checklist before the first order
- Material, CAS number, source and specification revision are stated.
- The use — cosmetic, food or supplement — is written into the file.
- The lot certificate, TDS and SDS are present and current.
- Source, allergen, GMO and residual-solvent statements are attached.
- The contaminant figures are recalculated for the daily dose.
- The label and claim review is recorded against the destination.
- Feedstock, process and pack changes have a written route.
- The quotation, specification and certificate cite the same revision.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation