Phytosterol esters vs phytosterols: solubility, dose and the label
Free phytosterols and phytosterol esters are not two grades of one ingredient. The free form is a crystalline sterol; the ester form has a fatty acid joined to it, which turns the powder into a fat-soluble paste and changes the mass that carries a given sterol dose. A formulator who swaps one for the other has to rewrite the fill weight and the label, not just the purchase order.
The ester adds a fatty acid, so a gram carries roughly 0.55 g of sterol at the catalog floor, dissolves in fat rather than water, and must be declared as plant sterol esters rather than phytosterols.
The bond that changes the ingredient
The shared part is the sterol ring system; the difference sits at the 3-hydroxyl. In the free sterol that hydroxyl is open. In the ester it has been reacted with a fatty acid, so the molecule now has a lipophilic tail and a higher mass. The sterol analysis still recognises the same sterol, but the ingredient is no longer the same substance.
Take beta-sitosterol as an example. Its molecular weight is about 415, while the oleate ester is about 679. Because the fatty acid can differ, a commercial ester is a mixture with a range of masses, and the sterol share falls as the fatty-acid chain gets heavier. This is why the certificate reports total sterols or ester content, not a single molecular weight.
| Item | Free phytosterols | Phytosterol esters |
|---|---|---|
| CAS in the catalog | 83-46-5, beta-sitosterol reference | 68441-68-9 |
| Physical form | Off-white crystalline powder, 80 mesh | Off-white paste, or a carrier powder |
| Sterol figure | ≥95.0% total sterols | ≥55.0% total sterols; ≥90.0% ester content |
| Water solubility | Insoluble | Insoluble |
| Fat solubility | Limited without heat | Miscible with edible fats |
| Declared ingredient | Phytosterols or plant sterols | Plant sterol esters |
| Typical use | Tablets, capsules, dry mixes | Softgels, spreads, oil blends |
The CAS numbers settle which material is on the order; a certificate for one form does not cover the other.
Solubility is the practical difference
Water is the dividing line in practice. Neither form dissolves in water, but the free sterol is a solid that needs heat and shear to enter an oil, and it can crystallise again on cooling. That behaviour suits a tablet or a capsule, where the powder is swallowed rather than dissolved, and it complicates a clear fat-based drink.
The ester, by contrast, is already a fat-like material. It mixes into spreads, dressings and oil fills without a melting step, and it can be filled warm into softgels. It still will not make a clear aqueous drink: in water it is an emulsion, and an emulsion needs an emulsifier, a homogeniser and a stability study.
A carrier powder is a handling aid, not a solubility fix. It lets the ester be weighed and blended as a solid, but the ester remains an oil phase once the powder is dispersed. Pick the form from the matrix, then choose the pack.
Dose arithmetic and the label basis
The dose arithmetic follows the sterol figure. The free powder at ≥95.0% delivers about 0.95 g of sterol per gram; the ester at ≥55.0% delivers about 0.55 g. For a 500 mg sterol declaration, that is 526 mg of free powder or 909 mg of ester at the floor. At 60.0% total sterols, the ester figure drops to 833 mg.
The ester content adds a second layer. If a lot is 90.0% ester and 55.0% total sterols, the ester portion is roughly 61% sterol. A 500 mg portion of that ester carries about 305 mg of sterol; 500 mg of the 95% free powder carries about 475 mg. The two labels say 500 mg, but they promise different amounts of sterol.
Every number on the label needs a basis: ester mass, total sterols or free sterol equivalent. The certificate, the fill weight and the label must use the same one. The figures here are arithmetic, not a dose recommendation.
What the label and the market file have to say
The ingredient name on the label is not a marketing choice. “Phytosterols” and “plant sterols” belong to the free form; “plant sterol esters” belongs to the ester. The quantity should name its basis as well, because 500 mg of ester and 500 mg of sterol are not the same declaration.
Source is the second label question. A soy-derived sterol and a sunflower-derived sterol trigger different allergen and GMO statements, and the ester's fatty acid source is a third variable. The label and the source statement have to match the certificate, not the sales sheet.
The EU novel-food list covers both free sterols and their food-grade fatty-acid esters, but the conditions attach to the category, the level and the label wording. The entry is a route, not an approval of the artwork; the buyer's regulatory team confirms the final text. In the US, the Supplement Facts panel names the form the product actually contains. No disease-related claim is made here.
Stability follows the form and the matrix
The free sterol is a crystalline solid that melts around 130–140 °C. Its storage risks are surface oxidation, moisture caking and heat that softens the crystal. A sealed, dark, dry pack is the default.
The ester has a fatty acid tail, so oxidation can start on the chain and hydrolysis can split the ester. Peroxide value and acid value are the relevant indicators, and a warm, moist hold is the condition to avoid. The ester is not inherently less stable; it simply fails by a different route, so the stability panel has to test the right things. A carrier powder brings the carrier's own moisture and flow risks, and it needs its own pack data.
When to choose which
Use the free sterol when the product is a tablet, capsule or dry blend and the label names phytosterols. Use the ester when the fat phase is the point: softgels, oil blends, spreads and dressings, with a label that names plant sterol esters. If the formula is aqueous and clear, neither form is a drop-in; the ester needs an emulsion, and the free sterol needs a solubilisation or suspension step.
Changing form is a reformulation. The fill weight, the ingredient name, the specification and the stability package all move, and the market file may need a new review. Put the change through control and check the certificate lines on the COA page before ordering. The catalog specification is on the ester hub; the form choice is on the grade page; the free-sterol reference is the phytosterol hub; the methods index explains the analytics; the quality page sets out release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation