Fatty Acids & Lipids · Core range

Phytosterol Esters

— · CAS 68441-68-9 · Phytosterol esters, paste or powder

Phytosterol esters specified at ≥90.0% ester content with a defined sterol profile; the esters and free phytosterols are different products with different solubility and label arithmetic.

Ester content (GC)
≥90.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Ester content (GC)≥90.0%
Total sterols≥55.0%
Acid value≤1.0 mg KOH/g
Peroxide value≤5.0 meq O₂/kg
AppearanceWhite to off-white paste or powder
IdentificationSterol profile conform
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formula—
CAS68441-68-9
Marker setPhytosterol esters ≥90.0%; total sterols ≥55.0%
AppearanceWhite to off-white paste or free-flowing powder
SolubilityInsoluble in water; soluble in fats and in organic solvents.

Primary method GC sterol and ester assay — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the form: phytosterol esters and free phytosterols are different products with different solubility and dose arithmetic.
  • Ask for the ester content and the sterol profile; the two are not interchangeable.
  • The material is heat-sensitive; the pack and the storage condition belong in the specification.
  • Do not use the page as a label or a claim: the finished product's status is a separate legal question.

Buyer questions

Practical answers

What is Phytosterol Esters specified to?

Ester content (GC): ≥90.0%. The full specification adds Total sterols, Acid value, Peroxide value, Appearance, Identification and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Phytosterol Esters is this?

The catalog grade is Phytosterol esters, paste or powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Softgel capsules, Oil-based blends, Fat-based spreads. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Phytosterol Esters is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.