05 Compliance

The regulatory file for phytosterol esters

Technical document 05 · Reviewed 2026-11-20 · Phytosterol Esters

On this page
  1. The four layers of the dossier
  2. European Union
  3. United States
  4. United Kingdom
  5. Contaminants and ester-specific limits
  6. Claims and the label
  7. Documents to keep on file
  8. Checklist before the first order

Three questions shape the regulatory file for a phytosterol ester: which form is being sold, where the fatty acid comes from, and which market will see the finished product. The certificate answers the first two only in part; the route and the label are separate work. The buyer's regulatory team signs off that route, and no disease-related claim is made on this page.

In one line

The ester is a different file from the free sterol: it has to name the form, the fatty acid source and the finished product, and the buyer's team confirms the route for the destination.

The four layers of the dossier

The dossier has four layers. Layer one is the specification: ester content, total sterols, free sterol, fatty acid source and carrier. Layer two is the lot evidence: the COA, the methods and the basis of each figure. Layer three is the market route: destination, product category, use level and label. Layer four is change control: what triggers a review when the source, carrier, process or pack moves.

Gaps usually appear where two layers meet. If the COA omits the source, the allergen statement has no support; if the specification does not say paste or carrier powder, the fill weight and the label cannot be fixed. A dated index at the front of the dossier makes those joins visible.

European Union

EU novel-food law is the starting point. Regulation (EU) 2015/2283 is the parent rule, and Implementing Regulation (EU) 2017/2470 carries the Union list. That entry applies to free phytosterols and to their esters with food-grade fatty acids; it sets categories, maximum levels and label conditions. As of this review the ceiling is 3 g/day on a phytosterol basis, but the current text is the authority.

An ester label declares ester mass, while the ceiling is expressed as sterol. The two must be reconciled before the daily portion is compared. Meeting the catalog specification does not prove the category or the portion is inside the entry; that is a market-specific check.

The contaminant limits in Regulation (EU) 2023/915, the supplement rules in Directive 2002/46/EC, the labelling rules in Regulation (EU) No 1169/2011 and the claims rules in Regulation (EC) No 1924/2006 sit alongside the entry. Read the current texts, not a summary.

United States

For the US, four variables decide the route: form, source, use level and product type. Phytosterol esters can be dietary ingredients, and a food use can be supported by a GRAS conclusion. The supplier names the basis and the supporting document; the buyer checks that it reaches the finished product and the intended use. The FDA gives no pre-market approval for a dietary ingredient; the dossier is the evidence.

Allergen review begins with the plant source. Soy- and sunflower-derived sterols do not generate the same statement, and even a purified ester needs a source review. The Supplement Facts panel should state the form actually used, such as plant sterol esters. For a carrier powder, the carrier is a label ingredient as well.

United Kingdom

Two regimes apply in the UK. Great Britain works to the GB register and GB label rules; Northern Ireland follows the EU novel-food route. The ship-to address selects the regime, and the buyer's team should record that choice on the order so the artwork and the citation can be checked against it.

Contaminants and ester-specific limits

Metal limits apply to what the consumer eats, not to the drum. Convert the lot result through the daily dose and the finished-product mass before comparing it with the limit. The table is a starting point; the destination text and the dose decide the final figure.

Metal limits for the finished product
MetalReference levelEvidence for the file
Lead (Pb)3.0 mg/kgBatch figure, test method, agreed limit, dose conversion
Cadmium (Cd)1.0 mg/kgBatch figure plus any category exception
Mercury (Hg)0.10 mg/kgBatch figure and the method used
Arsenic (As)Set by customer or marketAgreed limit and method on the certificate

The ester also has quality limits that are not contaminants: acid value ≤1.0 mg KOH/g and peroxide value ≤5.0 meq O₂/kg. They describe the fatty acid's condition and belong in the same review. Tests for residual solvents, mineral oil hydrocarbons and sterol oxidation products are not catalog lines; ask when storage has been warm, the extraction route is unclear or the market requires them. For a carrier powder, request the carrier's own certificate.

Claims and the label

No disease-related claim appears on this page. Any nutrition or health claim is reviewed against the destination's claims framework, and the brand's reviewer checks the claim text, the form and the conditions of use. The certificate supports the material, not the claim.

The label should identify the material, its source and the quantity basis. For an ester, that basis is ester mass, total sterols or free sterol equivalent, and it must be stated. “500 mg plant sterol esters” and “500 mg phytosterols” describe different amounts even when the packs weigh the same.

Documents to keep on file

Documents in a phytosterol ester dossier
PaperPurpose in the dossier
Specification (TDS)Form, ester content, sterol figure, free sterol, fatty acid source and carrier
Certificate of analysisLot results, test methods, basis of each figure
Safety data sheetHandling, storage, transport class
Source and allergen statementPlant source and allergen conclusion
GMO and origin statementSource, country of origin and process route
Carrier statementIdentity, level and certificate for a carrier powder
Stability summaryPack, condition and retest period
Novel-food confirmationEntry, conditions and destination relied on

Add a residual-solvent statement where the extraction or purification route makes it relevant, and a declaration for any processing aid the market requires. If the dossier lacks one of them, flag it before dispatch rather than after arrival.

Checklist before the first order

  • The specification names the ester, CAS number, form and carrier.
  • The COA carries ester content, total sterols, free sterol, acid value, peroxide value, metals and microbiology.
  • Metal results have been converted to the finished dose.
  • The artwork names the form and the basis of the quantity; claims are closed.
  • The route is confirmed for the exact form and source.
  • Source, fatty acid, carrier and pack sit under change control, and quotation, specification and COA share a version.

The catalog specification is on the phytosterol ester hub; the lot certificate is explained on the COA page; the free-sterol comparison is on the phytosterol hub; the methods index explains the analytics; the quality page sets out release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation