Paste, powder or carrier: choosing a phytosterol ester grade
The catalog grade is a neat ester paste with ≥90.0% ester content and ≥55.0% total sterols; a powder on carrier is a second grade because the carrier changes the ester content per gram and adds a label declaration. The fatty acid source and the free-sterol level are part of the grade as well, so a purchase order that names only “phytosterol esters” has not chosen one.
The grade is fixed by the physical form, the carrier and the ester-to-sterol arithmetic, and a switch in any of the three changes the fill weight and the label.
Why an ester is a family, not one grade
Esterification produces a family, not a single molecule. The sterol mixture, the fatty acid, the degree of conversion and the finishing step all vary, and each moves a property the formulator can feel: melting, flow, colour, solubility and the mass of sterol per gram.
The catalog narrows the family to a paste with ≥90.0% ester content and ≥55.0% total sterols. A powder on carrier is not the same grade in a different bag; the carrier is a formulation ingredient, and the powder's specification has to state its own ester and sterol figures.
The grade decision is a dosage-form decision before it is a purchasing decision. A softgel fill, an oil blend and a dry capsule each want a different physical behaviour, and the label that follows is different too.
Paste and powder on carrier side by side
| Property | Neat ester paste | Powder on carrier |
|---|---|---|
| Ester content | ≥90.0% on the paste | Lower by the carrier fraction; the powder's own figure applies |
| Total sterols | ≥55.0% on the paste | Lower in proportion to the carrier |
| Physical behaviour | Soft paste or waxy solid; flows when warmed | Free-flowing powder |
| Carrier | None | Named food-grade carrier; declared on the TDS and the label |
| Typical use | Oil blends, fat-based spreads, softgel fill | Dry blends, capsule fill, powder mixes |
| Handling | Warm gently to dispense; avoid repeated heat cycles | Keep dry; watch caking and segregation |
The table compares presentations, not quality. The powder is useful when the process cannot handle a paste; the paste is useful when the carrier is unwanted mass. The powder's ester content should be stated on its own specification, not inferred from the paste. A powder that is half carrier delivers half the ester per gram, and the fill weight has to be recalculated.
What the form does in the plant
The neat ester is a white to off-white paste or waxy solid at ambient temperature. It softens as it warms and flows when melted, which is convenient for a softgel fill or an oil blend and awkward for a dry blend. Dispense it by warming the closed container, not by adding water or solvent, and avoid repeated warm-cold cycles that can make the paste grainy.
The ester is insoluble in water and soluble in fats and organic solvents. It disperses in oil, melts into a fat phase and forms an emulsion when the formula supplies an emulsifier and the process supplies shear. A powder on carrier improves handling, not solubility; the ester is still an oil phase when the powder meets water.
The powder's risks are the carrier's risks: moisture pickup, caking, segregation in a blend and dust. The carrier is named in the specification, and the powder's ester and sterol figures are measured on the powder. Both presentations are heat-sensitive and need a sealed, cool, dry, dark pack; the 1 kg foil pouch and the 25 kg fiber drum are the standard packs.
Dose arithmetic when the grade changes
The label arithmetic starts with the total sterol figure, not the ester content. At the catalog floor of 55.0% total sterols, 1 g of neat ester delivers 0.55 g of sterol. At 60.0%, the same gram delivers 0.60 g. A label that declares 500 mg of total sterols therefore needs 500 ÷ 0.55 = 909 mg of ester at the floor, or 833 mg at 60.0%.
The ester content is a separate number. A 500 mg portion of ester is not 500 mg of sterol; at the floor, 90.0% ester content and 55.0% total sterols mean the ester itself is about 61% sterol, with the rest as fatty acid. A label that says “500 mg plant sterol esters” and one that says “500 mg phytosterols” declare different quantities.
For a powder on carrier, use the powder's measured total sterols. If the powder carries 40.0% total sterols, 500 mg of sterols needs 1,250 mg of powder. The carrier is part of the mass, and the fill weight has to include it. Certificate, specification and label need one shared basis: ester mass, total sterols or free sterol equivalent. None of these figures is a dose recommendation.
What to write into the specification
- “Phytosterol esters, CAS 68441-68-9; form: neat paste or powder on carrier; carrier named for the powder.”
- “Ester content ≥90.0% by GC; total sterols ≥55.0%; state the basis for each.”
- “Free sterol: report the result and agree a limit for the application.”
- “Fatty acid source or profile; the ester is a mixture, not a single fatty acid.”
- “Acid value ≤1.0 mg KOH/g; peroxide value ≤5.0 meq O₂/kg.”
- “Appearance; heavy metals and microbiology as listed; pack and storage condition.”
- “Destination market and label basis confirmed before the order.”
When the ester is the wrong grade
The ester is the wrong choice when the label declares free phytosterols. The two names are not interchangeable, and a label that says “phytosterols” cannot be supported by an ester certificate. It is also the wrong choice for a clear aqueous beverage with no emulsification step, because the ester is not water-soluble.
The free sterol is the better starting point for a capsule or tablet that declares phytosterols, and for a dry blend that needs a crystalline powder. The free-sterol product has its own specification and arithmetic; it is not a substitute for the ester in a fat-based formula, and the reverse is also true.
Changing form means rewriting the formula, not just the purchase order: the fill weight, the label name, the specification and usually the stability package all move. Handle it as a change control, not a balance adjustment.
The catalog specification is on the phytosterol ester hub; the certificate lines are on the COA page; the shelf-life consequences are on the stability page; the free-sterol alternative is on the phytosterol hub; the methods index explains the GC; the quality page sets out release.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation