Sunflower phosphatidylserine is hygroscopic; the pack and the lipid profile set the shelf life
Sunflower phosphatidylserine is a hygroscopic phospholipid powder with a high linoleic acid content, so it picks up moisture and oxidises, and an aqueous dispersion is less stable than the sealed powder. The pack, the seal and the storage temperature set the shelf life; the assay on the certificate says nothing about either. Assign the retest period from stability data for the exact pack.
Sunflower PS fails by moisture pickup and lipid oxidation, so the pack, the seal and the fatty acid profile decide the shelf life before the assay does.
The powder: moisture, oxygen and colour
The catalog sets loss on drying at ≤5.0%, which is a release gate rather than a storage allowance. Once the foil pouch is opened, the powder pulls moisture from the air; the as-is PS figure falls, the powder cakes, and the dispersion behaviour changes. The pouch should be resealed properly, or the remainder transferred to a smaller dry container.
Oxidation is the second driver. Sunflower PS carries a high linoleic acid fraction, and the double bonds are the site of oxidation. The products of that reaction show up as a rising peroxide value, then as a colour shift and an off note. The catalog panel does not include peroxide or acid value, so ask for them when the application is oxidation-sensitive and track them across lots.
Light and heat accelerate both moisture movement and oxidation. The sealed pouch is the barrier, and a clear jar on a bench is not a substitute. Let a cold pack equilibrate before opening so that condensation does not form on the powder.
The dispersion is the less stable format
PS is dispersible in water but does not give a clear solution; it forms lamellar structures or vesicles depending on the concentration and the process. In water, hydrolysis and oxidation run together, and the pH, the dissolved oxygen, the temperature and the hold time all move the result. A liquid fill needs its own stability work; the bulk powder data does not transfer.
If a liquid is unavoidable, keep oxygen low, control the pH, protect from light, and validate the hold time before filling. A pasteurisation or hot-fill step adds a heat load that the powder never sees. For the applications in this catalog — capsules, tablets and powder blends — the powder is the relevant format, and the liquid work is a separate project.
What drives degradation
| Factor | What it does | Control |
|---|---|---|
| Moisture | Raises loss on drying; cakes the powder; lowers the as-is PS figure | Sealed foil pouch; dry store; reseal after opening |
| Oxygen | Oxidises the linoleic fraction; raises peroxide value | Low headspace; sealed pack; modified atmosphere if specified |
| Heat | Accelerates oxidation and hydrolysis | Controlled store; cool process |
| Light | Promotes oxidation and colour change | Opaque or foil pack; dark store |
| Trace metals | Catalyse oxidation | Avoid iron and copper contact; check the metal panel |
| Acid or alkali | Hydrolyses the ester bonds; raises acid value | Keep the powder neutral and dry; validate any matrix pH |
These factors act together. A warm, humid store with the pouch folded open is worse than any single factor, and a dispersion at neutral pH in clear glass combines several at once. The useful question is not whether sunflower PS is stable, but stable in which pack, at which condition, for how long.
A stability protocol for the ingredient
A useful protocol names the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. Add a light-exposure arm, because a dark incubator misses the photostability question.
At each point test PS by HPLC, total phospholipids, loss on drying, peroxide value, acid value, appearance and microbiology. For a capsule or tablet, repeat the work in the finished form; for a powder blend, include the blend matrix, because the other ingredients can move moisture or catalyse oxidation. Report the individual results, not only a pass statement, and identify the pack and the lot family.
Ask for the stability summary for the pack you will buy. A 25 kg fiber drum and a 1 kg foil pouch have different headspace, different surface-to-volume ratios and different opening histories; the data belongs to the pack.
The finished formula changes the answer
A capsule or tablet starts with low water activity, but the shell, the excipients and the manufacturing humidity can still move moisture into the fill. Check loss on drying and appearance at release and again after storage. A tablet adds compression heat and pressure, so the particle form and the binder matter as much as the PS figure.
A powder blend is the most exposed format: the pouch or stick is opened repeatedly, the powder sits in a scoop, and the other ingredients may be hygroscopic. The blend's stability is measured in the blend, not inferred from the bulk powder. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets moisture in.
How the shelf life is set
We do not publish a single shelf-life number for sunflower PS, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim.
After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product page lists the standard packs; the COA page covers the release tests; the MOQ page covers pack and lead time; the soy page shows the other feedstock's specification; the methods library describes the assay; the quality page describes the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation