05 Compliance

The regulatory file for sunflower phosphatidylserine

Technical document 05 · Reviewed 2026-11-20 · Phosphatidylserine Sunflower

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and the finished-product dose
  5. Claims and the label
  6. Documents for the file
  7. Checklist before the first order

Sunflower phosphatidylserine is a food ingredient whose regulatory position depends on the destination, the intended use and the source. The EU novel-food list carries entries for soy phosphatidylserine and for phosphatidylserine from fish phospholipids, and the sunflower material has to be assessed on its own history and file. This page lists the documents and checks that belong in that file; the buyer's regulatory team confirms the route.

In one line

The sunflower source takes soy off the allergen line; it does not take the market file off the desk, because the EU novel-food entries name soy and fish, not sunflower.

What the file contains

The file has four parts: the specification for the sunflower material, the COA that releases the lot, the destination route and limits, and the change-control record for source, process and pack. The COA reports the lot; the specification states the grade; the SDS covers handling. None of them settles the route, which is recorded separately.

Source is the first line in this file. Phosphatidylserine is not a single regulatory object: the EU Union list names a soy material and a fish-derived material, and the sunflower material has to be assessed on its own. A file that cites the soy entry for a sunflower lot has cited the wrong source.

European Union

Food supplements sit under Directive 2002/46/EC and the general food law of Regulation (EC) No 178/2002. The novel-food framework is Regulation (EU) 2015/2283, and the Union list is Commission Implementing Regulation (EU) 2017/2470. As of this review, that list carries an entry for soy phosphatidylserine and phosphatidic acid — with the label designation “Soy phosphatidylserine and phosphatidic acid”, category limits and a restriction on marketing to pregnant and breast-feeding women — and an entry for phosphatidylserine from fish phospholipids. It does not carry an entry for sunflower phosphatidylserine.

That absence is not a conclusion. Whether the sunflower material is novel depends on its history of use in the Union before 15 May 1997, and that is a documented assessment, not an assumption from the word lecithin. Until the assessment is closed, the buyer's regulatory team should keep the route open and should not copy the soy designation onto a sunflower label.

Allergen labelling is separate. Regulation (EU) No 1169/2011 Annex II lists soybeans and products thereof, with narrow derogations for fully refined soybean oil and fat and certain tocopherol and phytosterol derivatives; soy lecithin and soy PS are not within those derogations. Sunflower is not on the list. Great Britain keeps its own novel-food register and labelling, and Northern Ireland follows the EU list; the delivery address decides which applies.

United States

In the US, the route depends on the use. A dietary supplement uses the dietary-ingredient framework of the FD&C Act as amended by DSHEA; a conventional food use needs a GRAS basis or an approved food additive. Sunflower PS has been the subject of GRAS notices for specified food uses, but a GRAS conclusion is use-specific and does not by itself cover a dietary supplement or an unlisted food category. The supplier states the basis it holds; the buyer checks that it extends to the finished product.

If the ingredient was not marketed in the US before 15 October 1994, the new-dietary-ingredient question arises, with its own notification route. That is a separate question from allergen labelling and from the structure/function claim review. Soy is one of the major food allergens under FALCPA and must be declared by its common name; sunflower is not. The finished-product label, not the drum label, carries that declaration.

Contaminants and the finished-product dose

The contaminant panel is a finished-product calculation, not only a drum result. The table is the usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit.

Contaminant limits to confirm for the finished product
ParameterTypical supplement referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplementLot result, method, limit and the dose calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, on the certificate

Commission Regulation (EU) 2023/915 sets the EU maximum levels; check the current consolidated text. The specification line and the legal limit are separate gates, so the file should show both, and the calculation that connects the drum result to the daily dose.

Claims and the label

The EU Register on nutrition and health claims does not carry an authorised claim for phosphatidylserine; EFSA's 2010 opinion on the submitted claims did not find them substantiated, as of this review. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. No disease claim is open in either market. This site publishes the specification and makes no health claim.

On the label, the source belongs with the ingredient name. In the EU, a product made with the soy material under the Union-list entry must use the designation “Soy phosphatidylserine and phosphatidic acid”; a sunflower product cannot borrow it. In the US, the Supplement Facts panel names phosphatidylserine and the source, for example phosphatidylserine (from sunflower lecithin). The allergen statement is a separate line: soy must be declared when present; sunflower is not a major allergen, but a soy-free claim is about the whole line, not only the ingredient.

Documents for the file

The file needs the COA with PS by HPLC, the total phospholipid profile, loss on drying, heavy metals, microbiology and particle size; peroxide and acid values for an oxidation-sensitive application; and the fatty acid profile that supports the sunflower source. Add the specification, TDS, SDS, source and process description, allergen statement, GMO statement, residual-solvent statement and the origin record.

For the EU, add the novel-food assessment or the basis on which the material is placed on the market, and the label designation review. For the US, add the dietary-ingredient basis and, where the use is a conventional food, the GRAS basis. The product page carries the catalog specification; the identity page covers the source evidence; the soy page shows the other feedstock; the methods library describes the assays; the quality page describes the release file.

Checklist before the first order

  • Specification version, source and CAS number are named.
  • PS and total phospholipid figures are on the COA, with the method.
  • Allergen, GMO, origin and residual-solvent statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label designation and the claim have been reviewed for the destination.
  • The source, process and pack are under change control.
  • The quotation, specification and certificate refer to the same version.

Two checks close the file: the source on the certificate matches the source on the label, and the market route matches the source. A sunflower lot cannot inherit a soy entry, and a soy lot cannot be sold as sunflower.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation