06 Identity & adulteration

How we prove an omega-3 concentrate lot is what it declares

Technical document 06 · Reviewed 2026-11-20 · Omega-3 Concentrate

On this page
  1. The layers that have to agree
  2. The ratio, the minor acids and the arithmetic
  3. Why XRD does not identify a liquid oil
  4. Where substitutions show up
  5. Writing identity into the specification
  6. Five questions for the supplier

Four measurements, read together, tell an omega-3 concentrate from a look-alike: the full fatty-acid profile, the EPA to DHA ratio, the lipid form, and the arithmetic that ties the figures to the declared 60%. The total is the weakest of them, because a 60% oil can be built from a stronger concentrate and a weaker oil, or from a different marine source. The form is a separate question: an ethyl ester and a triglyceride can both read 60%.

In one line

A concentrate is identified by the whole fatty-acid profile and its ratio, the form the oil is in, and the concentration arithmetic, because a 60% total can be assembled from more than one oil.

The layers that have to agree

A certificate can name the right material and still leave the identity unproven. The five layers below are separate questions, and each needs its own evidence; a supplier who answers only the assay has described a concentration, not an oil.

Identity layers for an omega-3 concentrate
LayerQuestionEvidence
DocumentWhich form, species and process?Name, species statement, lot code
ProfileIs the fatty-acid pattern consistent with the source?GC-FAME with the chromatogram
RatioDoes the EPA to DHA ratio match the declaration?EPA and DHA as separate figures
FormEthyl ester, triglyceride or re-esterified?Intact-lipid analysis; glycerol or ethanol
Mass balanceDo the total, FFA and oxidation figures agree?Assay, FFA, PV and p-AV on one lot

The certificate covers the profile, the ratio and part of the mass balance. The form stays a declaration until the intact lipid is analysed, and the species record sits in the supplier file. The certificate, the pack and the retained sample should share one lot code.

The ratio, the minor acids and the arithmetic

The concentrate is bought on a total, but it is identified on a profile. EPA and DHA are two peaks among many, and the minor acids are the part a blend cannot hide. DPA (C22:5 n-3), palmitic acid, linoleic acid, cholesterol and the phytosterols tell the reader whether the oil looks marine and whether a vegetable oil has been added.

The ratio is a specification line for a concentrate. This catalog holds EPA at 30.0–36.0% and DHA at 20.0–26.0% with a 60.0% total floor, which read together places the ratio near 1.3–1.5:1. A lot at 1:1 or at 3:1 is a different product, even when the total is 60%. The ratio is also a consistency check: a declared 1.4:1 that arrives at 1.1:1 points to a blend or a different cut before it points to an analytical error.

The arithmetic closes the identity. If the certificate reports 60% EPA+DHA, then 1 g of oil should carry about 600 mg of the two acids on the same basis; if the label declares 600 mg per gram and the certificate reports 55% on a free-fatty-acid-equivalent basis, the two documents are using different denominators. That is not necessarily a fraud, but it is a mismatch the buyer has to resolve before release.

Why XRD does not identify a liquid oil

X-ray diffraction looks at how crystal planes scatter a beam. The concentrate is a liquid and has no lattice, so a pattern from the neat oil cannot report on species, form or concentration. A conformity line on an oil certificate says nothing about the oil.

The technique belongs to the powder. A spray-dried concentrate sits on a carrier with a crystal structure, so the pattern reports the carrier and any crystalline contaminant, not the oil. It still says nothing about the fatty-acid profile or the form of the oil inside.

For the oil itself, the profile is a GC-FAME result and the form is settled by intact-lipid HPLC or GC. FTIR offers a quick fingerprint but does not quantify EPA and DHA or separate ester from triglyceride. Offering XRD as the identity test for a liquid concentrate is offering the wrong instrument.

Where substitutions show up

Common omega-3 concentrate substitutions and the signals
RouteSignalTest
Vegetable oil dilutionLinoleic acid and phytosterols rise; cholesterol fallsGC profile, sterols and cholesterol
Blend to hit 60%Total holds; ratio and minor acids driftFull GC profile against a retained reference
Ethyl ester sold as triglycerideThe form does not match the labelIntact-lipid analysis; glycerol and ethanol
Algal oil sold as fish oilDHA-heavy profile; species record missingProfile, species record, stable-isotope check
Oxidised oilPV and p-AV climb; fishy smellPV, p-AV and TOTOX
Over-concentrated cut with refined oilTotal on target; trans isomers and ratio varyGC with trans isomers and the minor profile

No single test covers every route. A certificate with only EPA, DHA and PV leaves the blend, the form and the species questions open. Bleaching and deodorisation strip the pigments, which makes colour the weakest signal: a pale oil may still be diluted or oxidised.

Writing identity into the specification

  • “Omega-3 concentrate, ethyl ester or triglyceride, from a declared fish source; species and origin stated on the certificate.”
  • “EPA 30.0–36.0%, DHA 20.0–26.0%, EPA+DHA ≥60.0% by GC-FAME, with the basis and the equivalent basis stated.”
  • “Identification by full fatty-acid profile against a reference; chromatogram on request.”
  • “Form proved by intact-lipid analysis; glycerol or ethanol reported as appropriate.”
  • “Free fatty acid ≤0.10%; PV ≤5.0 meq O₂/kg; p-AV ≤20.0; a TOTOX ceiling if agreed; trans-isomer figure if agreed.”
  • “No vegetable oil, no undeclared carrier, no undeclared form change.”

Five questions for the supplier

  1. Which fish species and origin does this lot come from, and is it a single source or a blend?
  2. Is the oil an ethyl ester or a triglyceride, and what intact-lipid method shows it?
  3. Which GC basis supports the EPA, DHA and DPA results for this lot?
  4. What are the PV and p-AV results, by which methods, and when was the lot produced?
  5. If the result is disputed, will you re-test the retained sample jointly?

Five answers of that kind form an identity file; one assay percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits on the certificate; the grades page compares the forms; the fish oil identity page covers the refined oil; the GC method is indexed under methods; the release workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation