04 MOQ & ordering

EPA powder: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · EPA Powder

On this page
  1. Why the minimum is 1 kg
  2. Pack sizes and what they change
  3. Lead time and what starts it
  4. The six details a quotation needs
  5. Samples and qualification
  6. Terms to agree before the order

The minimum order is 1 kg, packed as a 1 kg foil pouch; production volumes ship in 25 kg fiber drums. The catalog lead time is 1–7 days. A quotation needs six things: the specification, the quantity and pack, the destination and Incoterms, the documents, the shelf life and testing requirement, and the label or delivery detail.

In one line

One kilogram is the smallest unit that still carries a lot identity: a pack, a COA and a retained sample that match.

Why the minimum is 1 kg

One kilogram is the smallest unit that still carries a lot identity. It is drawn from a released lot, with a COA and a retained sample that match; a smaller repack would either lose that link or require a new lot. The minimum is a pack, not a favour.

The unit is also the qualification size: enough for a trial fill, a capsule run or a stick batch, and small enough to test the matrix before a 25 kg order. If the trial and the production order are placed together, ask for both from the same lot. A sample from a different lot does not qualify the production powder.

Order size and lot size are different things. A 1 kg pouch and a 25 kg drum can come from the same released lot if the lot is large enough and the packs are allocated together. If the trial must match the production run, say so before the lot is allocated; a later request cannot reopen a lot that has been used up.

Pack sizes and what they change

Packs for EPA powder and the points to confirm on each
PackTypical useWhat to confirm
1 kg foil pouchTrial, small batch, sample retentionLaminate, reseal, lot label, net weight
25 kg fiber drumProduction runFood-grade liner, liner integrity, net weight
Lot labelTraceabilityProduct, lot code, net weight, storage, allergen
Inner linerMoisture and oxygen barrierFood-grade, intact, compatible with the powder
HeadspaceOxidation controlAsk whether the pack is flushed; the catalog does not state it
RepackBuyer’s own packNew stability data, new label, original lot traceability

The pack is part of the specification. A foil pouch and a fiber drum are different barriers, and a repack is a third system. If the powder will be held for a long period, confirm the barrier and the headspace rather than assuming the bulk pack is enough.

Lead time and what starts it

The catalog lead time is 1–7 days. Confirm the start point in the quotation—order confirmation and specification sign-off are the usual triggers—and do not count the first email. A new specification, a new carrier or a new pack can add a production step; do not assume the catalog time applies.

Documents may take longer than the powder, and destination clearance is outside the lead time. Ask for the ship date and the Incoterms, not just the lead time; the Incoterms decide when risk and transport responsibility transfer.

The six details a quotation needs

Six details make two quotations comparable.

What to put in a quotation request for EPA powder
DetailWhat to stateWhy it changes the quote
SpecificationEPA and DHA basis, carrier, antioxidant, mesh, source, allergenSets the grade and the test panel
Quantity and pack1 kg or 25 kg, number of packs, one lot or splitSets the pack and the lot allocation
Destination and IncotermsCountry, city or port, Incoterms 2020, consigneeSets the transport and document route
DocumentsCOA, TDS, SDS, allergen and source statement, languageSets the file that ships with the lot
Shelf life and testingRemaining shelf life at delivery, third-party tests, dioxins and PCBsSets the lot age and the outside panel
Label and timingLabel text, artwork responsibility, required delivery dateSets the pack label and the schedule

A quotation that answers only the product name and the quantity is not comparable. Ask for the specification version and the lot allocation in writing.

Samples and qualification

A sample should be a pack from a released lot with the lot code and COA. A sample without a lot code cannot be compared with the production lot, and a “representative sample” is not traceable.

Trial the sample in the finished base: appearance, odour, dispersion, fill, and the oxidation values from its COA. Keep the sealed sample as the reference against the first production lot. Sample quantity and whether it is free are agreed in the quotation; do not assume either.

Keep the sample COA with the sample. When the first production lot arrives, compare its COA with the sample COA on EPA, DHA, PV, p-AV and moisture, and run the same dispersion trial. A match on the assay alone does not prove the two packs behave the same in the matrix.

Terms to agree before the order

Attach the specification version to the purchase order. Agree the source, carrier, antioxidant, allergen statement, shelf life at delivery, pack, quantity tolerance, change control and document language in the order, not after it.

Payment terms and Incoterms are agreed in the quotation. A change of oil source, carrier or antioxidant is a specification change: require a new COA and, where the change can move oxidation or the label, a new stability study. Agree how long the retained sample is kept; the retained-sample glossary entry explains why it matters.

The catalog specification is on the EPA powder product page; the certificate lines are on the COA page; the market file is on the compliance page. Lead time and MOQ terms are in the lead-time and MOQ glossary entries.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation