EPA powder or fish oil powder: choosing an omega-3 grade
Both powders carry a 10% number, but the number is standardised on different things. Microencapsulated EPA powder is released on EPA alone at ≥10.0% by GC; fish oil powder is released on EPA + DHA at ≥10.0%, with EPA and DHA reported separately. Switching changes the EPA per gram, the DHA on the label, the allergen statement and the fill weight.
EPA powder and fish oil powder can both say 10% and still deliver different amounts of EPA; the specification has to say which figure is standardised.
Why there is more than one omega-3 grade
Fish oil powder is a whole oil—triglycerides with a natural fatty-acid spread—standardised on the sum of EPA and DHA. EPA powder is an oil standardised on one fatty acid, carried on a starch matrix. Both are microencapsulated, both declare modified starch and antioxidant, and both meet 40 mesh and the same peroxide and p-anisidine limits. The difference is the specification basis, not the powder form.
A 10% EPA+DHA powder cannot guarantee 10% EPA; EPA is a fraction of the total, and that fraction comes from the profile. A 10% EPA powder guarantees the EPA floor but leaves DHA to the profile. The label has to say which figure it means, and the certificate has to report the figures on the same basis.
EPA powder and fish oil powder side by side
| Line | EPA powder | Fish oil powder |
|---|---|---|
| Standardised figure | EPA ≥10.0% by GC | EPA + DHA ≥10.0% by GC |
| EPA per 1,000 mg | ≥100 mg | Profile-dependent; below the total |
| DHA | Reported, not limited | Reported, part of the total |
| Label ingredient | Microencapsulated EPA powder | Microencapsulated fish oil powder |
| Source and allergen | Source declared; fish allergen if fish-derived | Fish source; fish allergen statement |
| Oxidation limits | PV ≤5.0 meq/kg; p-AV ≤20.0 | PV ≤5.0 meq/kg; p-AV ≤20.0 |
| Carrier and mesh | Modified starch and antioxidant; 40 mesh | Modified starch and antioxidant; 40 mesh |
| Typical fit | EPA-led capsule or stick | EPA+DHA or fish-oil-led label |
Read the table down, not across. The EPA line decides the powder weight for an EPA claim; the DHA line decides whether the label can name DHA; the source line decides the allergen; the carrier line decides the ingredient list and the fill. Two powders that match on the 10% line and diverge on the other seven are different ingredients.
What the powder does on the line
Both are dispersible, not soluble: the oil sits in a starch matrix, so the powder clouds water rather than dissolving. Both are specified at ≥95% through 40 mesh, which is about 425 µm, so sieve size alone does not separate them. Bulk density, flow, oil load, free oil and odour are not in the catalog line; ask for them on the grade you will fill. A capsule and a stick ask different things of the same mesh.
Microencapsulation is a barrier, not a taste-masking guarantee. The wall slows oxygen and moisture ingress, but the oil is still an oil. Trial the grade in the finished base—capsule, stick or beverage—before the label is fixed. The stability page explains what the wall does and does not protect.
Matching the grade to a label dose
Start from the label figure, not the powder weight. For 100 mg EPA, a 10% EPA powder needs 1,000 mg; a 10% EPA+DHA powder depends on the EPA share of the total: if EPA is 60% of the declared total, 100 mg EPA needs 1,667 mg. For 100 mg DHA, a 10% DHA powder needs 1,000 mg.
Capsules have a fill ceiling. A 1,000 mg powder fill is already large, and 1,667 mg is usually a stick, not a capsule. A gram-for-gram switch can underdeliver the label or overflow the fill. Use the lot result rather than the catalog minimum, and add an overage only with stability data behind it.
How to write the grade specification
Write the grade as a full identity. EPA powder: “Microencapsulated EPA powder, ≥10.0% EPA by GC, basis stated as free acid or ethyl ester, DHA reported, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0, carrier modified starch and antioxidant declared, ≥95% through 40 mesh, heavy metals and microbiology as listed, source and allergen statement attached.”
Fish oil powder: “Microencapsulated fish oil powder, ≥10.0% EPA+DHA by GC, EPA and DHA reported separately, the same physical and oxidation lines, fish source and allergen statement attached.” A specification that says only “10%” is ambiguous. The method and the basis are part of the grade, not a footnote.
When a different grade is the wrong answer
If the label is built on total omega-3 or on fish oil as the ingredient name, an EPA powder may not carry the ingredient list. If the label is built on EPA with a low DHA figure, a fish oil powder may need too much powder per dose. If the claim is fish-free, neither fish-derived powder fits; an algal source is a different specification and a different regulatory route. If the formula needs a clear solution, neither grade delivers it.
The catalog specification is on the EPA powder product page, and the fish oil powder is on its own product page. The EPA-versus-DHA arithmetic is on the EPA vs DHA page; the certificate lines are on the COA page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation