02.1 EPA vs DHA

EPA vs DHA: profile, dose and the label

Technical document 02.1 · Reviewed 2026-11-19 · EPA Powder

On this page
  1. Two fatty acids, not two grades of one thing
  2. Content, basis and the label figure
  3. The ratio has to be specified
  4. Fish and algal sources change the file
  5. Naming the ingredient on the label
  6. When to choose which

EPA (C20:5 n-3) and DHA (C22:6 n-3) are different fatty acids, with different molecular weights and different label arithmetic. A powder standardised on EPA is not interchangeable gram-for-gram with one standardised on DHA or on EPA+DHA. The choice belongs in the specification and the label, before the formula is fixed.

In one line

EPA and DHA are different label ingredients: the same milligram of powder carries a different amount of each, and the ratio has to be written into the specification.

Two fatty acids, not two grades of one thing

EPA has 20 carbons and five double bonds; DHA has 22 and six. Both are long-chain n-3 fatty acids; the difference is not a quality ranking. The free acids have molecular weights of about 302.5 and 328.5. In an oil they are usually triglycerides or ethyl esters, and the fatty-acid figure is calculated after transesterification, so the same mass of fatty acid corresponds to a larger mass of ester.

DHA has one more double bond, so more sites for oxidation; in a blend it is usually the more oxidation-sensitive of the two. That is a stability fact, not a ranking of the two.

Content, basis and the label figure

The label dose is a weight of fatty acid, not a weight of powder, and it is usually stated as free acid. Ten percent EPA as free acid is about 9.2% as ethyl ester; ten percent DHA as free acid is about 9.2% as ethyl ester. For a triglyceride the conversion is different again. A label that says 100 mg EPA needs a stated basis.

What common omega-3 label wording means for powder weight
Label wordingWhat the number meansPowder for 100 mg of the named fatty acid
EPA 10%≥10% EPA by GC1,000 mg for 100 mg EPA
DHA 10%≥10% DHA by GC1,000 mg for 100 mg DHA
EPA+DHA 10%Sum of the two ≥10%≥1,000 mg for 100 mg total; the weight for 100 mg EPA depends on the EPA share
Omega-3 10%Sum of n-3 fatty acids, not only EPA and DHAProfile-dependent; not a substitute for an EPA figure

If EPA is 60% of a 10% EPA+DHA powder, 100 mg EPA needs 1,667 mg. A 250 mg EPA label needs 2,500 mg of a 10% EPA powder; that is a stick or several capsules, not a single capsule. Do the arithmetic before the dosage form is chosen.

The ratio has to be specified

The ratio is the proportion of EPA to DHA. It is not fixed by the word “omega-3”. Fish oils vary by species and concentration; algal oils are often DHA-rich; a high-EPA concentrate can be mostly EPA. A ratio specification should say “EPA:DHA = x:y, both by GC on the same basis”, or set absolute minima for each. A ratio alone can be met by dilution; pair it with absolute figures.

The ratio moves with source and concentration. A change of ratio is a new label ingredient, not a minor adjustment. If the label makes a figure for each fatty acid, the ratio and the two absolute figures belong in the specification together.

Fish and algal sources change the file

Fish oil brings a fish allergen statement and the dioxin and PCB question, with a long history of use in the EU, US and UK. Algal oil avoids the fish allergen, but its EU novel-food authorisation and US regulatory history have to be checked. The molecule is the same; the regulatory route and the allergen statement are not.

Source declaration belongs on the specification and the label. “EPA powder” alone is not a source. A fish-derived lot and an algal lot can meet the same EPA figure and carry different labels, different allergen statements and different market files. The compliance page sets out the three routes.

Naming the ingredient on the label

Name the ingredient as it is: microencapsulated EPA powder, fish oil powder, algal DHA powder. Do not call an EPA+DHA powder “EPA powder”. Declare EPA and DHA separately if the label makes a figure for either; a total omega-3 figure is a different claim. The carrier and antioxidant are ingredients and have to be declared. The allergen statement follows the source, not the fatty acid.

The label arithmetic is not a disease claim. The authorised-claims register is a separate review, and a composition figure does not authorise a claim by itself. Review the wording before the artwork.

When to choose which

Choosing an omega-3 powder from the label backwards
If the label is built onChooseCheck
An EPA figureEPA powderDHA result and ratio; source and allergen
A DHA figureDHA powder or algal DHASource; EPA result; regulatory route
EPA+DHA or fish oilFish oil powderEPA/DHA split; fish allergen; oxidation
A fish-free labelAlgal sourceNovel-food or dietary-ingredient route

Choose on the label, the arithmetic, the allergen and the market—not on a generic ranking. If the formula needs both fatty acids, a blend is a third specification: write the ratio and the total, and test both. The grade page compares EPA powder with fish oil powder; the COA page shows the GC lines; the fish oil powder and DHA powder pages carry the neighbouring specifications. The catalog entry for this grade is on the EPA powder product page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation