02.1 Phytase vs xylanase

Phytase vs xylanase: two feed enzymes, two units

Technical document 02.1 · Reviewed 2026-11-20 · Phytase

On this page
  1. Two units, two definitions
  2. Two substrates, two jobs
  3. The assays do not share a readout
  4. From activity to grams per tonne
  5. When both enzymes are in the same diet
  6. What to write when buying either or both

Phytase and xylanase are different enzymes with different substrates, and each is measured by an assay written for its own reaction. Phytase activity is reported in FTU by the sodium-phytate method; xylanase activity is reported in units defined against a xylan substrate. A phytase figure and a xylanase figure cannot be converted, added or set side by side, even though both are printed as units per gram.

In one line

FTU and U are two assays, not two strengths: the numbers cannot be converted, added or compared across the two enzymes.

Two units, two definitions

The phytase unit is pinned to a single definition. One FTU is the amount of enzyme that releases one micromole of inorganic phosphate per minute from sodium phytate at pH 5.5 and 37 °C, as set out in EN ISO 30024. The substrate, the pH, the temperature and the phosphate readout are all part of the unit, which is why an FTU/g figure is comparable across suppliers who cite the same method.

A xylanase unit is not pinned to one definition in the same way. The common form is the amount of enzyme that releases one micromole of reducing sugar, as xylose equivalents, per minute from a named xylan at a stated pH and temperature. Published feed definitions use oat spelt xylan at pH 5.3 and 50 °C in one case and at pH 4.8 and 50 °C in another, and some define a unit as 0.06 micromole rather than one micromole under their own conditions. The letter “U” therefore identifies a family of assays, not a single scale.

The practical consequence is simple. A powder at 10,000 FTU/g and a powder at 100,000 U/g are not “ten times” apart, and neither number can be converted into the other. The only safe comparison is between two figures produced by the same method on the same substrate at the same conditions.

Two substrates, two jobs

Phytase and xylanase against each other
PropertyPhytaseXylanase
EC number3.1.3.8 (3-phytase) or 3.1.3.26 (6-phytase)3.2.1.8 (endo-1,4-β-xylanase)
SubstratePhytate, myo-inositol hexakisphosphateArabinoxylan, a β-1,4-xylan polymer
Substrate sizeA small molecule with six phosphate groupsA polysaccharide chain
What hydrolysis releasesInorganic phosphate and lower inositol phosphatesXylose and xylooligosaccharides
Assay readoutInorganic phosphate by molybdate colourReducing sugar by dinitrosalicylic acid or a similar reagent
UnitFTU, defined at pH 5.5 and 37 °CU, defined by the xylan, pH and temperature on the certificate

The substrates explain why the two enzymes are not interchangeable. Phytate is a mineral-binding molecule, and phytase acts on it to release phosphate and lower the binding capacity of the inositol phosphates. Arabinoxylan is a structural polysaccharide, and xylanase cuts the backbone into shorter chains. One reaction is a dephosphorylation; the other is a depolymerisation. A feed formulation may use both, but it does not choose between them.

The assays do not share a readout

Both methods are colorimetric, which is where the confusion starts. The phytase assay measures inorganic phosphate released from sodium phytate, developed with molybdate and read against a phosphate standard. The xylanase assay measures reducing ends released from xylan, developed with dinitrosalicylic acid or a comparable reagent and read against a xylose standard. A phosphate standard cannot calibrate a reducing-sugar method, and a xylose standard cannot calibrate a phosphate method.

Each assay also needs its own blank. The phytase powder can carry phosphate from the fermentation or the carrier, and that phosphate is read as product unless a sample blank is subtracted. A xylanase powder can carry reducing sugars or a carbohydrate carrier that reacts in the same readout. In a blend that contains both enzymes, the two backgrounds have to be separated before either figure means anything, which is one reason a blend is released against two methods rather than one “total activity” number.

The conditions matter as much as the chemistry. A phytase figure at pH 5.5 and 37 °C and a xylanase figure at, for example, pH 4.8 and 50 °C describe two different experiments, and neither can be corrected to the other by a factor.

From activity to grams per tonne

The inclusion rate is calculated from the target activity in the feed and the activity of the preparation. The unit cancels only within its own assay.

Two worked inclusions, each in its own unit
EnzymeTarget in feedPreparation activityPowder per tonne
Phytase500 FTU/kg10,000 FTU/g50 g
Xylanase1,000 U/kg100,000 U/g10 g

The 50 g and the 10 g are not a statement that one enzyme is stronger. They are the result of two different targets and two different product activities. Change the phytase preparation to 5,000 FTU/g and the same target needs 100 g per tonne; change the xylanase preparation to 50,000 U/g and its target needs 20 g per tonne. The arithmetic follows the declaration on the certificate.

The target itself belongs to the nutritionist and the feed formulation. It should be written with the unit and the method, and it should be supported by the trial or the supplier's efficacy file rather than inferred from another product's inclusion rate. Process losses differ between the two enzymes, so an overage measured for one does not transfer to the other.

When both enzymes are in the same diet

Phytase and xylanase are commonly used together because they act on different fractions of the same feed. A wheat- or barley-based diet can carry both phytate and arabinoxylan, and the two enzymes do not compete for the same bond. Using both is a formulation decision; substituting one for the other is not possible at any inclusion rate.

A blend is specified by two activities, two units and two methods. The certificate should report the phytase figure and the xylanase figure separately, each with its own assay conditions, and the specification should carry both activities rather than a single summed number. A “total enzyme activity” figure has no unit and cannot be checked by a laboratory.

Stability also has to be handled per enzyme. The two proteins can lose activity at different rates through storage and pelleting, so a blend that passes at release can be out of balance at the end of the shelf life. Ask for stability data on the blend, not only on the two powders separately.

What to write when buying either or both

  • “Phytase, EC 3.1.3.8 or 3.1.3.26, source organism named; activity ≥10,000 FTU/g by the sodium-phytate method at pH 5.5 and 37 °C.”
  • “Xylanase, EC 3.2.1.8, source organism named; activity in U/g with the xylan substrate, pH and temperature written out.”
  • “In a blend, both activities and both methods reported separately; no summed or converted figure.”
  • “Loss on drying, carrier, granulation and particle size stated for each component.”
  • “End-of-shelf-life minimum for each activity; process-loss data for the intended route.”

The two product pages carry the catalog specifications: phytase and xylanase. The phytase grades page covers activity tiers and granulation; the COA page shows how the FTU line is reported; the methods library describes the assay conditions; the quality page covers release and change control.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation