Phytase grades: activity, granulation and carrier
Phytase is bought by activity, so a grade is a decision about how many FTU one gram carries, how the powder behaves in a mixer, and which carrier it sits on. The catalog form is an 80-mesh powder at ≥10,000 FTU/g; a granulated preparation is quoted as a separate specification. The unit does not change between grades: a preparation carrying several times the activity per gram is the same FTU at a different concentration.
A phytase grade is a concentration and a particle, not a different unit: the FTU stays the same while the grams per tonne and the handling change.
Why one enzyme arrives in several preparations
Fermentation produces a concentrate, not a finished powder. The concentrate is standardised with a carrier to a declared activity, then milled, granulated or coated for the way it will be handled. Each of those steps is a specification decision, and each one changes the certificate rather than the enzyme's chemistry.
Three variables define a grade. The first is activity per gram, which fixes how much powder a tonne of feed needs. The second is particle size and granulation, which fix dust, flow and mixing behaviour. The third is the carrier and the coating, which fix what the powder is diluted with and how much heat it survives. A buyer who orders “phytase” without those three has left the grade open.
Source is a fourth variable, and it is not a grade. A 3-phytase and a 6-phytase are different enzymes with different EC numbers, different pH profiles and separate regulatory files. A change of source is a change of product, not a change of pack size.
Powder, granulate and dilution
| Property | Powder (catalog) | Granulated | Diluted preparation |
|---|---|---|---|
| Activity per gram | ≥10,000 FTU/g | Same declared activity, coarser particle | Lower per gram; more carrier |
| Particle size | ≥95% through 80 mesh | Coarser; size stated on the specification | As declared, usually close to the base powder |
| Dust | Present; handle with extraction | Lower | Lower per gram of powder, not per unit of activity |
| Flow and mixing | Free-flowing | Improved flow in a premix line | Bulkier; more mass to weigh and mix |
| Heat survival | Set by the preparation | A coating, not granulation alone, is what helps | No advantage from dilution |
| Mass per tonne of feed | Base case | Same, if the activity is the same | Higher, in proportion to the dilution |
| Specification impact | Base specification | Sieve result and granulation record | Activity and carrier identity |
The table makes one point plain: granulation and dilution are different changes. Granulation keeps the activity per gram and changes the physical form. Dilution lowers the activity per gram and changes the mass the mill must weigh. Treating the two as one “grade” is how a formulation ends up with the right activity on paper and the wrong amount in the mixer.
Appearance, solubility and handling
The catalog material is an off-white to light tan, free-flowing powder. It dissolves in water to a clear to slightly turbid solution, which is useful for a liquid application but says nothing about activity: a fully dissolved powder can be heat-damaged and a turbid one can be fully active.
The 80-mesh line is a finishing specification. It is measured by sieving and it moves when the mill, the sieve or the granulation changes. The powder is hygroscopic enough that an open container in a humid room will pick up moisture, and the resulting loss on drying lowers the activity per gram even when no enzyme has been damaged. Keep the pack closed and the store dry.
Dust is a handling property, not a quality defect. It matters for operator exposure, for clean-down and for how evenly the powder disperses into a premix. A granulated grade is chosen for those reasons; it should not be chosen on the assumption that a coarser particle is automatically more stable in a pellet press.
The arithmetic from FTU/g to grams per tonne
At 10,000 FTU/g, one gram carries 10,000 FTU and one kilogram carries ten million FTU. If the formulation target is 500 FTU/kg of feed, each kilogram of feed needs 500 ÷ 10,000 = 0.05 g of powder, which is 50 g per tonne. At 750 FTU/kg the same powder needs 75 g per tonne. A diluted preparation at 5,000 FTU/g would need 100 g per tonne for the same 500 FTU/kg.
Those are conversions, not recommendations. The target activity belongs to the nutritionist and the feed formulation, and it should be stated with the unit, the assay pH and the substrate. An overage for pelleting losses is a separate formulation decision; it is not part of the ingredient specification and it does not change the FTU/g on the certificate.
The same arithmetic catches a grade error. If a premix is built for a 10,000 FTU/g powder and a 5,000 FTU/g lot arrives, the inclusion rate doubles. Nothing on the activity line warns the operator, because both lots pass their own specification. The purchase order and the formulation must name the same activity per gram.
Writing the grade into the specification
- “Phytase, EC 3.1.3.8 or EC 3.1.3.26, with the production organism named.”
- “Activity ≥10,000 FTU/g, measured by the sodium-phytate assay at pH 5.5 and 37 °C, with the method reference.”
- “Loss on drying ≤8.0%; appearance off-white to light tan.”
- “Particle size ≥95% through 80 mesh; granulation and carrier stated when they differ from the catalog powder.”
- “Heavy metals and microbiology as listed; pack, storage condition and end-of-shelf-life activity.”
- “Not a substitute for a different EC number without a written change control and a new specification.”
The catalog powder is the base grade. A granulated or diluted preparation is a different purchase with its own sieve result or activity figure, and it should not replace the catalog powder without a written change control. Start with the phytase product page for the catalog specification. How each certificate line is reported is on the COA page; why the FTU cannot be set against the xylanase unit is on the level-four comparison; the methods library covers the assay, and the quality page sets out the release file.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation