04 MOQ & ordering

Phytase: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · Phytase

On this page
  1. Where the 1 kg minimum comes from
  2. The packs we ship
  3. Dispatch, transit and the calendar
  4. Making a quotation comparable
  5. A sample that can be traced
  6. Settling the terms

The MOQ for phytase is 1 kg in a foil pouch; the bulk pack is a 25 kg fiber drum; the standard lead time is 1–7 days from order confirmation. A firm quotation needs the activity and the assay method, the pack, the destination and Incoterm, the documents and the intended use, because a feed customer and a food customer do not need the same file.

In one line

One kilogram is the minimum because it is the smallest pack that carries a lot code, a retained sample and an assay record.

Where the 1 kg minimum comes from

One kilogram at 10,000 FTU/g carries ten million FTU. At a formulation target of 500 FTU/kg of feed that is enough for 20 tonnes of feed, which covers a bench trial, a mill trial and a retained sample from the same lot. The pack is a traceable commercial unit, not a scoop taken from a drum.

Below 1 kg the usual route is a split from a bulk lot, repacked into a smaller container. That adds handling and cuts the link to the original pack, while the enzyme itself is unchanged. The 25 kg drum is the bulk unit: 250 million FTU, less handling per kilogram, but also more inventory and a longer storage period. The minimum is set by the pack and the traceability it carries, not by a volume target.

The activity figure matters to the arithmetic. A 1 kg pack of a lower-activity preparation covers fewer tonnes at the same target, so the buyer should convert the pack into FTU before deciding whether it is enough for the trial.

The packs we ship

The three standard packs
PackFillWhere it fitsHandling note
Foil pouch1 kgTrials and small batchesKeep sealed; reseal after opening
Fiber drum25 kgProduction runsLined; lot code repeated on the liner
Granulated gradeOn requestDust control and flowSieve result changes with granulation

The catalog form is an 80-mesh powder, ≥95% through 80 mesh. Granulation is a different specification, not a packing choice: it moves the sieve line and may move the lead time. If the dosage form or the premix line needs a coarser, freer-flowing powder, say so before the quotation so the specification and the pack are priced and scheduled together.

Dispatch, transit and the calendar

Quoted dispatch for the catalog pack is 1–7 days from confirmation of the order. Picking, paperwork and dispatch sit inside that window; freight transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack takes longer, and the quotation should say so.

Get a dispatch date, not only a window. The pouch usually travels as a parcel and the drum as a pallet; the Incoterm decides who books the freight and who clears customs. The COA and the other lot documents should ship with the pack, not arrive after it.

Heat is the reason transit deserves attention for this product. A parcel left in a hot vehicle or on a sun-exposed dock can lose activity before it reaches the bench, so the shipping method and the season belong in the order conversation, not only the freight rate.

Making a quotation comparable

A quotation can be compared when it states six things:

  1. The preparation and its source. Phytase, with the EC number and the production organism named.
  2. The unit and the method. The FTU/g figure, the sodium-phytate assay, pH 5.5, 37 °C, and the method reference.
  3. The release specification. Loss on drying, heavy metals, microbiology and particle size.
  4. The pack and the quantity. The 1 kg pouch, the 25 kg drum, or a granulated preparation.
  5. The destination and the trade term. The destination country, the port or delivery address, and the Incoterm.
  6. The intended use and the market. Feed, food processing or another use, and where it will be sold.

A quotation that names only “phytase 10,000” is incomplete. The unit needs its method, and the material needs its source and pack. Commercial terms are stated on the quotation; this page describes the pack and the documents that make the offer comparable.

A sample that can be traced

The 1 kg pack is the sample that qualifies a lot. Assay activity, moisture and microbiology before scaling, and retain a sample from that pack. The sample's lot code should agree with the COA and the quotation. Without a lot code, a sample proves nothing about the production lot.

Transport can change the sample. A pouch that spent a week in a warm courier network may assay below the certificate, and the difference belongs to the journey rather than to the supplier. Record the condition on arrival and assay promptly.

A trial that needs less than a kilogram is drawn from a bulk lot and repacked, so it is not the 1 kg catalog pouch. The split carries its own handling record and should be requested in writing, with the lot code kept beside the trial data.

Settling the terms

Put the commercial and quality terms in one place: Incoterm, pack, dispatch window, specification revision, a COA with every lot, the retained sample, the retest period and a change-control route. The activity guarantee needs a date attached: a figure at release and a figure at the end of the shelf life are different promises.

A lot that misses the specification is handled through the retained sample and a joint re-test using the named method; a photograph of the drum is not evidence. The quality agreement should name the referee laboratory, say who pays for it, and fix the method it will use.

The catalog specification is on the phytase product page. The COA page lists the release tests, the compliance page the market files, the methods library the assay and the quality page the release and change-control workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation