05 Compliance

The regulatory file for phytase

Technical document 05 · Reviewed 2026-11-20 · Phytase

On this page
  1. The preparation, not just the protein
  2. European Union
  3. United States
  4. Contaminant limits and the finished product
  5. What can be said
  6. What belongs in the phytase file
  7. Checks before the first order

Phytase, CAS 9001-89-2, is an enzyme preparation, and its regulatory route depends on what it goes into: a feed additive, a food enzyme used as a processing aid, and an ingredient of a supplement are three different files. The specification describes the preparation; it does not decide the route. The buyer's regulatory team confirms the route for the destination and the finished product; this page sets out the documents and checks that file needs.

In one line

The specification describes the enzyme preparation; the route depends on whether it goes into feed, food processing or a supplement, and on the market.

The preparation, not just the protein

A phytase product is the enzyme plus a carrier, and often a coating, plus the residues of the fermentation that made it. The regulatory entry, where one exists, is written around that preparation: the production organism, the activity, the carrier and the intended species or food use. “Phytase” as a word does not identify a preparation, and it does not carry an authorisation from one product to another.

Two EC numbers appear in the market. A 3-phytase (EC 3.1.3.8) and a 6-phytase (EC 3.1.3.26) hydrolyse different phosphate positions on the phytate ring, come from different production organisms and have separate files. The certificate and the specification should name the EC number and the organism, not only the activity.

Change control follows from that. A new strain, a new carrier or a new granulation is a change to the preparation, and the destination file may need to be reopened even when the FTU/g figure is unchanged.

European Union

For feed, the framework is Regulation (EC) No 1831/2003 on additives for use in animal nutrition. Authorisations are granted for a defined preparation, with conditions on target species, minimum or maximum content in complete feed, and labelling; Regulation (EC) No 767/2009 adds the feed-labelling rules. As of this review, a phytase preparation has to be checked against its own authorisation entry, because the conditions are not interchangeable between products.

For food, an enzyme used as a processing aid falls under Regulation (EC) No 1332/2008 and the food-enzyme list as it currently stands. A feed authorisation does not carry across to a food use, and the food route may require the specific preparation to be listed. The current consolidated text is the reference; the market can change, so confirm before the first shipment.

United States

For feed, the route runs through the Federal Food, Drug, and Cosmetic Act and the FDA's Center for Veterinary Medicine, with AAFCO ingredient definitions where one exists. Those definitions are written around a specific preparation, so the source organism and the carrier on the certificate are part of the check rather than background detail.

For food, an enzyme preparation used as a processing aid may be covered by a GRAS position or by the processing-aid route, and the basis has to extend to the specific preparation and its use level. The supplier states the basis it relies on and supplies the document behind it; the buyer confirms that the basis covers the finished product and the market.

Contaminant limits and the finished product

Contaminants are judged on the finished product, not only on the drum. The catalog limits below are the release gate; the destination text and the daily intake or feed inclusion rate decide whether the finished product complies.

Contaminant gates and the finished-product check
ParameterCatalog limit (as received)What the file should show
Lead (Pb)≤3 mg/kgLot result, method and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and the destination limit for the feed or food category
Cadmium (Cd)≤1 mg/kgThe lot result, plus any exception for that food category
Mercury (Hg)≤0.1 mg/kgLot result and method
MicrobiologyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absentCount and absence statement for the lot

For feed in the EU, Directive 2002/32/EC on undesirable substances sets the limits that apply to feed materials and compound feed, and the finished-feed calculation follows from the inclusion rate. For food, Commission Regulation (EU) 2023/915 sets contaminant limits by food category. Neither text is reproduced here; the buyer applies the current version to the product as sold.

What can be said

No disease-related claim is made for this material, and none should be built on the certificate. In feed, claims and labelling follow the authorisation and the feed-labelling rules; in food and supplements, nutrition and health claims fall under Regulation (EC) No 1924/2006 in the EU and under the corresponding US rules, and a claim needs its own authorisation or substantiation.

The activity figure is not an efficacy claim. It says how much enzyme activity the powder carries under the assay conditions, not how much phosphorus an animal absorbs or what a finished feed will deliver. Efficacy belongs to trial data and to the customer's own claim file, and the assay pH of 5.5 is not the pH of the gut.

Environmental statements about phosphorus in manure are claims in their own right. They need measured trial support and a check of the destination rules; they are not implied by the activity on the certificate.

What belongs in the phytase file

Start with the COA and the specification. The COA should name the preparation, the EC number and the production organism, and report activity by the sodium-phytate method with its blank and standard, loss on drying, heavy metals and microbiology. Add the TDS, the SDS, the carrier declaration and the origin record for the manufacturing site.

The allergen and GMO statements matter for an enzyme. Fermentation media can carry allergens, the carrier may be a starch or a mineral, and the production organism may be genetically modified; each of those is a declaration the customer's file needs. Add the residual-fermentation statement, the method reference and the regulatory status the supplier relies on for the intended use.

The phytase product page holds the catalog specification. The COA page explains the lot certificate and the identity page the analytical evidence. The methods library covers the assay conditions, and the quality page sets out the release file.

Checks before the first order

  • Specification version, CAS number, EC number and production organism are named.
  • The intended use is settled: feed additive, food enzyme or another route, in which market.
  • COA, TDS, SDS, carrier, allergen, GMO, origin and residual-fermentation statements are on file.
  • Heavy-metal and micro results are converted to the finished-product dose or inclusion rate.
  • The label and any claim have been reviewed for the destination.
  • Strain, carrier, granulation and pack are under change control.
  • Quotation, specification and certificate carry the same version.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation