How we prove a keratinase lot is the declared enzyme
A keratinase lot is identified by four agreeing lines: the declared source organism and strain, a keratin-substrate activity assay with its unit definition, a protein profile that fits the preparation, and a lot record that ties certificate, pack and retained sample together. The U/g figure alone cannot do that work, because a different protease can be made to produce a number on the same assay.
A keratinase lot is identified by its source, its keratin assay, its protein profile and its lot record together, not by the U/g figure alone.
The four identity layers
The layers answer different questions. A source statement names the organism; an activity assay shows that the preparation hydrolyses keratin under the declared conditions; a protein profile shows whether the powder looks like the qualified material; a lot record shows that the document and the pack describe the same batch. A supplier who answers only the assay has shown activity, not identity.
| Layer | Question | Evidence |
|---|---|---|
| Source | Which organism and strain were fermented? | Strain declaration, origin record, fermentation description |
| Activity | Does it hydrolyse keratin at the declared rate? | U/g with substrate, pH, temperature, time and unit definition |
| Protein | Does the profile fit the preparation? | Total protein and a gel or chromatographic profile |
| Record | Does the paperwork point to this pack? | Lot code, COA and retained sample |
Keratinase is a functional name rather than a single molecular identifier. That makes the source and the method more important, not less: the name describes what the enzyme does, and the file has to describe which preparation does it.
The keratin-to-casein ratio
Total protein can be measured by Bradford, BCA, Kjeldahl or another named method, and each carries a bias. The more revealing number is the ratio of activity on keratin to activity on casein, run under the two methods the supplier uses. A preparation that cuts both substrates at similar rates is a broad protease; a preparation with a high relative rate on keratin is doing the job the name describes. The ratio is a fingerprint, not a purity figure.
The arithmetic is simple. If a lot reads 50,000 U/g on keratin azure and 20,000 U/g on casein, the keratin-to-casein ratio is 2.5. A general protease may show the reverse pattern: high casein activity and modest keratin activity. The absolute numbers depend on the two methods, so compare the ratio inside one supplier's method set, not across laboratories. A ratio that drifts across lots points to a change in the fermentation, the recovery cut or the standardisation.
Specific activity, U per milligram of protein, is a second trend line. A carrier lowers both activity and protein, so the ratio holds. Heat damage lowers activity while protein is still measured, so specific activity falls. Neither number is a universal cutoff; both are useful when the method is held constant.
X-ray diffraction is the wrong identity test
A dried enzyme powder is amorphous, so an X-ray diffraction pattern is a broad halo rather than the sharp reflections of a crystal. The halo can look similar from lot to lot without showing which protein is present. XRD is useful for a different question: it can detect a crystalline carrier or a crystalline contaminant, and it can show that a sample is not the crystalline material a certificate claims.
A matching diffractogram is not proof that a lot is keratinase. The identity case rests on the source, the keratin assay and the protein profile. If a customer specification requires XRD, use it as a composition check and put the identity claim on methods that can support it.
Routes that can satisfy a weak test
| Route | What passes | What detects it |
|---|---|---|
| Carrier dilution | The blend still assays at the declared U/g | Carrier declaration, mass balance, specific activity |
| Another protease | Keratin is cut, and the assay responds | Keratin-to-casein ratio, protein profile, strain record |
| Heat-killed powder | Protein and colour remain | Activity falls and specific activity falls |
| Assay tuning | A higher number under a different substrate or time | Method sheet, unit definition, independent assay |
| Different source | The word “keratinase” covers it | Strain statement, origin record, supplier audit |
These rows are checks, not charges. Most shipments match their paperwork. A single U/g result covers one row; the other rows need the method sheet, the protein profile and the source record. A gel pattern is a quick view of whether the protein looks like the qualified material, and the strain record is a quick view of whether the organism matches the declaration.
A specification that can be checked
- “Keratinase preparation; production organism and strain declared; ≥50,000 U/g.”
- “The U is defined by the keratin-substrate assay; substrate, pH, temperature, time and standard are printed on the COA.”
- “Activity reported as-is, with loss on drying ≤8.0% beside it.”
- “Protein and specific activity reported, with the protein method named.”
- “Keratin-to-casein activity ratio reported where the identity is disputed.”
- “Carrier and any second enzyme activity declared; no undeclared diluent.”
- “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.”
The final lines carry weight. A dilution is acceptable only when the carrier is written into the specification and the certificate, not left to an email. A second enzyme activity follows the same rule: if the powder contains one, the description says so.
Five questions before qualification
- Which organism and strain were fermented, and what is the origin record?
- How is the U defined — substrate, pH, temperature, time and standard?
- Was the assay run as-is or on dried solids, and what did the lot's moisture test show?
- Which protein method was used, and what keratin-to-casein ratio did the lot give?
- Does the powder contain a carrier or a second enzyme activity, and which document declares it?
If the method answer is “standard”, ask for the sheet. A carrier answer of “none” should come with a mass balance. The product page carries the catalog limits; the COA page shows where each answer lands on the certificate; the grades page covers dilution and granulation; the level-four comparison covers the substrate question; the neutral protease pages show the casein-based route; the methods index leads to the assay notes; the quality page describes the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation