Where keratinase is permitted, and what the file must show
Keratinase is offered as a technical enzyme preparation for feed and processing uses, and the regulatory route follows the use rather than the activity name. A feed additive, a processing aid and an industrial enzyme are three different files. The buyer's regulatory team confirms the route for the destination market and the finished product.
The intended use decides the route: a feed additive, a processing aid and an industrial enzyme are three different files.
Start with the use, not the name
The first question is what the preparation does in the process. An enzyme added to feed to change its digestion sits under feed-additive law. An enzyme used to hydrolyse a raw material before that material is further processed may be a processing aid, with a different set of rules. An enzyme used in waste processing or another step outside the feed and food chain is an industrial preparation, and those statutes may not apply at all. The same drum can be described three ways, and only one description fits the actual use.
The second question is the preparation, not the word. Permission attaches to an organism, a strain, a fermentation process and a carrier, not to “keratinase” in the abstract. Two powders that both read 50,000 U/g can sit under different regulatory positions. The file should name the preparation and the use together.
This page does not assert that the material is a dietary supplement ingredient. The catalog entry describes a technical enzyme; a supplement or food use would need its own route, and that route is not created by this page.
European Union: feed additive first
In the EU, a feed enzyme is a feed additive under Regulation (EC) No 1831/2003. The regulation requires an authorisation for the additive, the target species and the conditions of use before the product is placed on the market, and the entry is held in the EU register. The file should identify the entry that covers the preparation and the use, not only the enzyme activity. An EFSA opinion is tied to the strain and the process, so a different preparation needs its own evidence.
As of this review, the register and the current consolidated text are the reference, and the buyer's team should check both before the first shipment. A preparation used as a processing aid, or outside the feed chain, may not need a feed-additive entry, but only if the use and any carry-over into feed or food are checked. “EU approved” is not a usable statement without the entry and the use beside it.
The United Kingdom is two jurisdictions for this purpose. Great Britain keeps its own register and labelling rules; Northern Ireland remains under the EU framework. The ship-to address, not the buyer's headquarters, determines which one applies, and the order file should record that determination.
United States: the use and the basis
As of this review, a US feed use usually runs through an AAFCO ingredient definition and the FDA Center for Veterinary Medicine, or a GRAS position for the specific preparation. Ask which basis the supplier is claiming and read the document; a notice for one strain or carrier does not automatically cover another. The buyer then checks that the basis reaches the target species, the inclusion rate and the finished feed.
For an industrial use, the feed and food routes may not apply, and the buyer's team checks the rules for that use separately. In every case, the specification, the certificate and the label should describe the same preparation, because the regulatory statement is only as good as the material it names.
Contaminants and the calculation
The catalog limits are release limits on the powder. Feed law sets limits on the feed material or the complete feed, and the enzyme is usually a small fraction of that. The file should show the conversion, not only the drum result.
| Parameter | Catalog limit | What the file should show |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Lot result and the contribution at the use level |
| Arsenic (As) | ≤2 mg/kg | Lot result and the destination limit for the feed |
| Cadmium (Cd) | ≤1 mg/kg | Lot result and any category exception |
| Mercury (Hg) | ≤0.1 mg/kg | Lot result and the method |
| Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Lot count and absence statement; feed hygiene rules |
| Loss on drying | ≤8.0% | Quality figure; it also sets the activity basis |
In the EU, as of this review, undesirable substances in feed are controlled under Directive 2002/32/EC, and the limit applies to the feed material or complete feed named in the directive, not to the enzyme concentrate. The buyer converts the lot result to the use level and compares it with the destination limit. A drum result below the catalog limit can still fail the finished-feed calculation if the inclusion is high.
Claims and the specification statement
This material carries no disease-related claim, and these pages describe the specification and the file rather than any effect in the animal or the consumer. “Keratinase activity ≥50,000 U/g by the named assay” is a specification statement. It is not a health claim and it is not an efficacy claim.
A feed claim about digestibility or performance belongs to the authorised use and to the brand that makes it. The file can support identity, activity and purity; it cannot support a statement about what the finished feed does. The label artwork and the marketing copy should keep that line visible, and the claim review is separate from the certificate review.
Documents for the file
- Specification naming the preparation, the source organism and the unit definition.
- Lot COA with result and limit in separate columns.
- Technical data sheet covering activity, solubility, pH and the pack.
- Safety data sheet, including dust-control and exposure sections.
- Source and strain declaration, with the origin record.
- Carrier and composition statement.
- Allergen and GMO statements for the organism and the inputs.
- Authorisation or registration reference for the intended use and market.
- Stability summary for the pack, and the assay method sheet.
Checks before the first order
| Check | Evidence |
|---|---|
| Use and market named | A memo covering feed, processing or industrial use, not only the substance |
| Preparation recorded | Organism, strain, carrier and process description |
| Regulatory entry confirmed | EU register entry, AAFCO or GRAS basis, or the GB position |
| Contaminants converted | Lot COA plus the use-level calculation |
| Label and carrier checked | Activity unit, source, carrier and storage on the pack |
| Claims reviewed | Substantiation file held by the brand |
| Change control agreed | Written route for a source, process or carrier change |
The catalog entry sits on the keratinase product page; the release lines are on the COA page; the source and activity evidence is on the identity page; the neutral protease pages show a food-enzyme route for comparison; the methods index leads to the assay notes; the quality page sets out the release steps.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation