Keratinase vs protease: the substrate, the unit and the label
Keratinase is a protease, but not every protease is a keratinase. The difference is the substrate: a keratinase unit is measured on keratin, while a general protease unit is usually measured on casein or haemoglobin. The two units are not convertible, and a specification or label that omits the substrate has not named the activity.
A general protease and a keratinase are not interchangeable: the substrate defines the unit, and the unit defines what the label can say.
The substrate decides what the number means
Keratin is a structural protein built for strength. Hair, wool and feathers pack it into a dense, cross-linked arrangement, and the disulfide bonds between cysteine residues make it resistant to the proteases that digest an ordinary dietary protein. A keratinase is useful because it works on that material. The assay has to use the substrate that matches the job.
| Substrate | What it measures | Strength | Limitation |
|---|---|---|---|
| Keratin azure | Release of dye from a dyed keratin powder | Sensitive and readable in a spectrophotometer | The dye and the particle size are part of the method |
| Feather meal | Hydrolysis of native β-keratin | Close to a real feather process | Slow, heterogeneous and hard to standardise |
| Soluble keratin | Hydrolysis of a modified, dissolved keratin | Fast and repeatable | The modification may remove the resistance that matters |
| Casein | General proteolytic activity | Well-established and comparable | Does not show whether keratin is attacked |
A high casein figure is not a substitute for a keratin figure. Many proteases cut casein well and native keratin poorly. If the process uses feather meal or another keratin-rich material, the release assay should use a keratin substrate.
50,000 U/g is incomplete without its definition
There is no single keratinase unit in common use. One method defines a unit as the amount of enzyme that raises absorbance at 595 nm by 0.01 per hour on keratin azure. Another defines a unit as the amount that releases one micromole of dye per minute. A third reports micrograms of tyrosine released under a fixed incubation. All three are called U, and the numbers they produce are not on the same scale.
That is why a bare activity figure cannot be compared across suppliers. A powder at 50,000 U/g under a one-hour dye-release method and a powder at 50,000 U/g under a one-minute micromole method may differ by orders of magnitude in real performance. The certificate has to print the substrate, the pH, the temperature, the incubation time, the standard and the calculation. The specification has to carry the same definition.
The unit is also a mass calculation. A process that needs 200,000 U per kilogram of substrate with a 50,000 U/g powder adds 4 g per kilogram. If the definition changes, the 4 g changes with it. The methods index sets out the calculation.
Why a general protease is not a drop-in
Most keratinases belong to the serine protease or metalloprotease families, and many share a catalytic mechanism with proteases that are not keratinolytic. What separates them is the ability to bind and hydrolyse compact keratin, not the mechanism alone. A neutral protease such as bacillolysin is a general proteinase: it works well on casein and soluble protein at neutral pH, and it may release some protein from a pretreated feather meal, but its unit is a casein unit and its performance on native keratin is a separate question.
Process conditions move the comparison further. Keratin hydrolysis is often run warm and on the alkaline side, where the substrate swells and the enzyme is active. Reducing agents that break disulfide bonds can raise the rate, but they change the process as well as the enzyme, and they are not part of the powder's specification. A keratinase that performs well in one matrix may be ordinary in another; the data has to come from the matrix in question.
The keratin-to-casein ratio is the practical fingerprint. Run both assays under the supplier's methods and compare the ratio across lots. A high relative rate on keratin is consistent with the name; a ratio that looks like a general protease is a reason to ask for the source record and the protein profile. The identity page sets out those checks.
Keratinase and neutral protease side by side
| Property | Keratinase | Neutral protease |
|---|---|---|
| Assay substrate | Keratin (azure, feather meal or soluble keratin) | Casein |
| Unit | U/g under the named keratin method | U/g under the named casein method |
| Working pH | Preparation-specific; often neutral to alkaline | Neutral, around pH 7 for the common casein method |
| Typical job | Hydrolysing feather, hair, wool and other keratin-rich material | Hydrolysing soluble protein in food, feed and technical processes |
| What the number shows | Activity on a resistant structural protein | General proteolytic activity on a soluble substrate |
| Label declaration | Enzyme name, keratin unit and source | Enzyme name, casein unit and source |
The table is a comparison, not a ranking. Each enzyme is the right tool for its substrate. The error is to read the two U/g figures as one currency and substitute one powder for the other on a unit-for-unit basis.
What the label can say
A feed or technical label should name the enzyme, the source organism, the activity in U/g, the substrate and conditions behind that unit, and the carrier. “Keratinase 50,000 U/g” with no method reference is a number without a definition; a buyer cannot check it and a regulator cannot compare it. “Protease” alone is broader still, because it covers enzymes with different substrates and different units.
The label has to agree with the certificate and the specification. If the certificate reports activity on keratin azure and the label implies a casein unit, the documents describe two measurements. If the carrier or the source organism changes, the label and the regulatory file change with it.
This page does not establish a dietary-supplement status for the material. A supplement use would need its own ingredient declaration, unit convention and regulatory review; the activity figure cannot simply be carried across from a feed label.
When to specify which
Specify keratinase when the substrate is keratin-rich and resistant: feather meal, hair, wool, horn or a process stream built on those materials, at the pH and temperature the preparation is designed for. Ask for the method sheet before the first order; the unit is only meaningful with it.
Specify a neutral protease when the substrate is soluble protein and the process runs near neutral pH; the casein unit is the established measure there, and the neutral protease pages set out that specification. A blend is possible, but each activity needs its own unit, assay and label line. Do not replace one with the other on a unit-for-unit basis, and re-validate the process if the enzyme or its source changes.
The catalog entry sits on the keratinase product page; the release lines are on the COA page; the concentration and particle options are on the grades page; the source and ratio evidence is on the identity page; the methods index leads to the assay notes; the quality page describes the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation