80 mesh or granulated: choosing a keratinase grade
The catalog keratinase grade is an 80-mesh powder at ≥50,000 U/g; a granulated form is available on request. The choice between them is about dust, flow and the mass that carries a unit target, not about a different enzyme. A dilution or a higher-activity concentrate would be a separate specification and should be quoted as one.
The grade changes concentration, particle form and carrier, while the substrate and the unit definition stay fixed.
Concentration is a mass calculation
A process is set to deliver a number of units per batch or per tonne of substrate, not a weight of powder. The concentrate supplies 50 units per milligram, so a target of 250,000 U per kilogram of substrate takes 5 g of the catalog powder. If the same enzyme is extended to 25,000 U/g, the same target takes 10 g and brings the carrier with it. The enzyme is unchanged; the mass, the carrier load and the weighing tolerance are not.
That arithmetic drives the practical choice. A concentrated powder keeps the inclusion small, which matters in a blend with several minor ingredients. A more dilute grade can make a small unit target easier to weigh accurately, but it adds carrier and can separate in a hopper if the particle sizes differ. The activity on the certificate is not a purity figure: a 50,000 U/g preparation may be mostly carrier, and that is normal for a standardised enzyme.
The forms and what changes
| Form | Activity | What it is | Fits | Watch |
|---|---|---|---|---|
| Catalog powder, 80 mesh | ≥50,000 U/g | The standard grade; carrier and source declared | Blends and processing trials with a small inclusion | Dust, static and small weighings |
| Granulated, on request | Same unit definition; re-measured after granulation | Agglomerated particles | Low-dust rooms and free-flowing blends | Heat and moisture of the granulation step |
| Dilution, development item | Lower figure fixed in the specification | Standard powder extended with a named carrier | Bulk handling where a larger mass is wanted | Carrier declaration; segregation in the blend |
The first two rows are catalog packs. The third is a specification exercise: it becomes a legitimate grade only when the carrier is named, the lower activity is written into the specification, and the certificate reports the result for the blend rather than the base powder.
What the powder does in the room
An 80-mesh powder passes openings of about 180 µm. It flows, it raises dust when poured, and it can carry a static charge that makes a small weighing fussy. Enzyme dust is a respiratory sensitiser, so local exhaust ventilation or a weighing booth belongs in the process description, together with gloves and eye protection. The safety data sheet covers the handling detail.
Granulation can cut dust and improve flow, but the binder, the water or solvent, the drying temperature and any post-granulation milling all become part of the specification. Measure the activity after granulation; the base powder's figure does not describe the granule. With a blended dilution, check the particle size of the blend as well as the enzyme, because a coarse carrier and a fine enzyme can separate in a hopper or a bag.
The powder dissolves in water to a clear to slightly turbid solution. That is useful for a liquid feed or a process step, but it is not an identity test: other proteins also dissolve. Colour is a weak check for the same reason.
Dose is an activity calculation, not a weight
Write the dose as units per kilogram of substrate or per tonne of feed, then convert to powder with the measured activity. At 50,000 U/g, one gram carries 50,000 units; a process that needs 200,000 U per kilogram of substrate uses 4 g per kilogram. If the granulated grade assays at 48,000 U/g after processing, the same target uses 4.17 g, so read the post-granulation figure rather than assuming the base value.
Build the overage on evidence. Activity falls during storage and through a thermal process, and the size of the fall depends on the pack, the temperature and the time. A formulator who adds an overage without a stability result is guessing; one who measures the loss and then sets the overage is making a specification decision. The stability page sets out the data to ask for.
What the specification should say
- “Keratinase preparation, source organism and strain declared, ≥50,000 U/g.”
- “The U is defined by the keratin-substrate assay; substrate, pH, temperature, time and standard are printed on the COA.”
- “Result reported as-is; loss on drying ≤8.0%; ≥95% through 80 mesh.”
- “Carrier named and quantified; a dilution is specified separately from the standard grade.”
- “Activity re-measured after granulation or blending, not inferred from the base powder.”
- “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤1,000 cfu/g; E. coli and Salmonella absent.”
A grade change is also a document change. The specification, certificate, label, blend calculation and stability summary move together, while the unit definition stays put. Switching to a dilution without rewriting those documents creates two materials under one name.
When to keep the catalog grade
Keep the 80-mesh powder when it already flows and the process can control dust. Granulation adds heat and moisture for no gain if the room is already fitted for powder handling. Do not dilute with a carrier that the customer's specification or the destination's label rules exclude, and do not move to a higher activity if the resulting scoop becomes too small to weigh reliably.
The catalog entry sits on the keratinase product page. The COA page sets out the release lines; the level-four comparison explains why the substrate in the assay matters; the MOQ page covers packs and order quantities; the neutral protease pages show a different enzyme with its own unit; the methods index leads to the assay notes; the quality page describes the release workflow.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation