02.1 Base vs HCl

L-lysine free base vs L-lysine HCl: chloride, pH and the label

Technical document 02.1 · Reviewed 2026-11-20 · L-Lysine

On this page
  1. Chloride: the extra mass
  2. pH: alkaline base, acidic salt
  3. The mass: 1.25 and 0.800
  4. The label: naming the form
  5. Which formula fits which
  6. Switching form is a change control

The hydrochloride is the free base plus one equivalent of hydrochloric acid. The addition changes three things that matter commercially: the powder is 19.4% chloride by mass, its 5% solution sits at pH 5.0–6.0 instead of being alkaline, and the ingredient name on the label must say “hydrochloride”. The lysine itself is the same; the weight, the acidity and the name are not.

In one line

Chloride adds mass and acidity, so the same lysine dose is heavier as the salt, and the label must name the form in the drum.

Chloride: the extra mass

Chloride accounts for 35.45 of the salt's 182.65 g/mol, or 19.41%; the specification range is 19.0–19.6%. The free base has no counter-ion, so its release sheet has no chloride line at all. A base lot that shows 19% chloride is the salt, or a blend containing it. A salt lot that shows little or no chloride is not the salt, whatever the titration says.

The measurement is ion chromatography or argentometric titration. Chloride is both a form check and a mass check: it is the fraction of the powder that carries no lysine. The result should be read beside the assay, not in a separate file, because the two together describe what the powder is made of.

Chloride is not a purity measure. A chloride-free result says only that the HCl counter-ion is absent; it does not say the powder is pure, dry or the right enantiomer. Those questions belong to the rotation, the loss on drying and the titration.

pH: alkaline base, acidic salt

The salt is specified at pH 5.0–6.0 for a 5% solution. The base is alkaline, well outside that window. In a drink, an acid will consume part of the base and lower the finished pH; in a sealed acidic powder, the base can take up carbon dioxide and release it later, changing the pack; in a wet granulation, the alkaline surface can shift the binder and excipient choice.

The salt pulls a formula toward its own pH window, which is why it is the easier starting point for an acidic drink or a conventional granulation. That does not make it neutral: pH 5–6 is still acidic enough to matter in a delicate matrix, so measure the finished product pH rather than inferring it from the ingredient sheet.

pH is supporting evidence, not an assay. It moves with concentration, residual acid or base and carbon dioxide uptake, so one reading cannot prove the form. Use it with chloride, rotation and titration.

The mass: 1.25 and 0.800

One gram of free base delivers one gram of lysine. One gram of the salt delivers 146.19 ÷ 182.65 = 0.800 g of lysine, so the salt weight is 1.25 times the lysine figure. A label that declares 500 mg of lysine needs 500 mg of the base or 625 mg of the hydrochloride. A 500 mg capsule of the salt delivers about 400 mg of lysine.

Lysine declared and the mass of each form
Lysine declaredFree base to weighHydrochloride to weigh
400 mg400 mgAbout 500 mg
800 mg800 mgAbout 1,000 mg
1,000 mg1,000 mgAbout 1,250 mg

The extra 25% has to fit the dosage form. A tight capsule may not have the space; a sachet or a beverage powder usually does. The label arithmetic and the fill weight should be signed off together, because a change in form moves both.

The label: naming the form

In the EU, the ingredient list names the ingredient used: “L-lysine” for the base and “L-lysine hydrochloride” for the salt. A quantitative statement should say whether the number refers to the base, the salt or the lysine entity, or the reader cannot reproduce the dose. Great Britain's retained food-information rules apply the same naming principle, while Northern Ireland uses the EU text.

In the US, Supplement Facts lists “L-lysine”; if the salt is used, it appears in parentheses after the lysine entry, and the declared quantity is lysine. Lysine has no Daily Value, so the panel carries no percentage. A label that names L-lysine while the drum is the salt would declare 500 mg of lysine from 500 mg of salt, which delivers about 400 mg.

Claims are separate from the name. In the EU, no authorised health claim for lysine is listed as of this review. In the US, structure/function language needs substantiation and the DSHEA disclaimer. A compositional statement is not a health claim, yet it still needs to agree with the certificate and the form.

Which formula fits which

Where a capsule or tablet has little room, the base has the advantage: a given dose occupies about a fifth less powder than the salt. The trade-off is the alkaline surface, faster water uptake and the ingredient name. A wet granulation usually runs more easily on the salt, whose crystals are less alkaline and flow well, but it still requires a moisture limit and a drying stage.

A sachet or a drink mix usually starts from the salt, because it dissolves readily, the solution sits near pH 5–6, and chloride is included in the weighed mass. A base in an acidic drink consumes acid and can change the flavour balance. Gummies and chews need a trial in the actual matrix, where water activity, heat and reducing sugars can matter more than the form.

Switching form is a change control

A switch is not a substitution at the balance. It needs a new specification with the other CAS number, a dose recalculation, a finished-product pH check, a stability review and new artwork. The COA lines change too: the salt has chloride and a pH line, while the base is read through its rotation and titration.

Do not switch to repair a flow or fill-weight problem without checking the label. Mesh and granulation are the tools for flow; the form is a labelling and formulation decision. If the label names L-lysine, the base is the matching material; if it names the hydrochloride, the salt is. The free base hub and the hydrochloride hub carry the two specifications. The grades page sets the comparison in context; the COA page shows how the form appears on the certificate; the quality page covers change control; the methods library describes the tests.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation