03 Stability

L-lysine free base: water, carbon dioxide and the pack

Technical document 03 · Reviewed 2026-11-20 · L-Lysine

On this page
  1. The powder in storage
  2. In solution
  3. What moves the material
  4. A stability protocol
  5. How the formula changes the answer
  6. Setting the retest period

L-lysine free base is hygroscopic and alkaline, and those two properties set its storage behaviour. The dry powder is stable in a closed, dry pack; water, carbon dioxide, heat and reducing sugars are the things that change it. A solution is the more demanding format because pH, heat and sugar act at once, and the finished matrix decides how long the product keeps.

In one line

The powder's enemies are water, carbon dioxide and heat; the formula's sugar and pH decide how quickly the shelf life is used up.

The powder in storage

A sealed pack is the first control. The free base takes up water more readily than the salt, so the loss on drying climbs after opening, the as-is assay drops and lumps begin to form. The 0.5% limit is a release gate, not a budget for storage: a lot released near the limit has less room before it exceeds the limit.

Carbon dioxide is the second ingress. The alkaline powder can absorb it from the air, and a sealed acidic blend can later release gas and change the pack. Keep the material closed, dry and away from acids, and let a cold pack reach room temperature before opening so condensation does not form on the powder. A desiccant can help in a humid room, but it does not repair a broken seal. Light is not the main risk for this material; the pack is there for water and carbon dioxide.

In solution

The base dissolves freely and leaves an alkaline solution. Lysine's side-chain amino group reacts with reducing sugars under heat in the Maillard reaction, so a sweet drink or a sugar-containing stick pack browns and loses lysine. The rate rises with temperature, with pH and with the amount of reducing sugar available.

An alkaline solution also supports microbial growth unless the formula and the process control it. Validate the hold time in the real matrix, measure the finished pH, and keep the vessel closed to limit carbon dioxide pickup. A preservative system designed for an acidic drink may not behave the same way at alkaline pH, and a bulk-powder result does not predict a beverage.

What moves the material

Storage and formula factors · L-lysine free base
FactorEffectControl
WaterLoss on drying up; caking; lower as-is assaySealed pack; dry room; desiccant if needed
Carbon dioxideCarbonate formation; pH drift; gas in a sealed packKeep closed and separate from acids
HeatFaster water uptake and faster browningCool store; controlled process temperature
Reducing sugarMaillard reaction; colour and lysine lossSugar choice; water activity; heat control
pHAlkaline solutions react fasterMeasure and buffer the matrix
Iron and copperCatalyse browning at trace levelsAvoid contact; keep the metal panel in view

These factors compound. A warm, humid room with an open pouch combines water and heat; a sweet, alkaline drink in a hot fill combines sugar, pH and heat. The question is not whether L-lysine is stable in general, but how long it lasts in a defined pack, at a defined condition, in a defined matrix.

A stability protocol

Test the pack that will be sold. Three conditions are conventional: 25 °C with 60% RH for long-term storage, 30 °C with 65% RH as the intermediate arm, and 40 °C with 75% RH for acceleration. At each time point, measure assay, specific rotation, loss on drying, appearance and microbiology.

For a stick pack or a drink, run the work in the real matrix, using the process pH and the heat load, with a sugar-containing and a sugar-free variant where a reducing sugar is present. Report individual numbers rather than a pass mark, and name the pack and the lot family. Light exposure is not the priority here; water and heat are.

The summary has to belong to the pack you will buy. A drum and a pouch are not interchangeable in a stability file: their surface-to-volume ratio, headspace and opening history differ, and those differences belong in the data, not in a footnote.

How the formula changes the answer

Capsules and tablets keep water activity low, but the shell and the excipients can still transfer moisture to the fill, so loss on drying is measured at release and repeated after storage. The alkaline base can also affect a wet granulation, which makes the process pH and the drying step part of the trial.

A stick pack is only as good as its seal. One pinhole in the foil is enough, so the strip is checked too, not just the powder. If the stick is sweetened with a reducing sugar, the Maillard combination sits in a small package with a large surface area. A drink adds pH, heat and a preservative system; a gummy adds high water activity and a heat step. In each case the bulk result is a starting point, not the answer.

Setting the retest period

We do not quote one shelf life for all packs. The retest period depends on the container and the store, and it is supported by the file for that combination. Without those two details and the test list, a figure cannot be used.

Once the retest period ends, test the retained sample again before extending use. Extension needs data, not assumption; a bulk figure cannot simply be copied to a repacked container. Standard packs are listed on the product hub. Release tests are on the COA page; pack sizes and lead time are on the MOQ page; the form choice is on the grades page; the other form is on the hydrochloride page; the methods library explains the tests; the quality page describes release and retest.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation