02 Ratio & grades

Citrulline malate ratios and grades: 1:1, 2:1 or the free amino acid

Technical document 02 · Reviewed 2026-11-20 · L-Citrulline Malate

On this page
  1. The name carries the grade
  2. Four readings of the same name
  3. Water, flow and sourness
  4. From label figure to powder weight
  5. Clauses for a 1:1 purchase
  6. When the free amino acid wins

The catalog material is L-citrulline malate 1:1, a molar salt that carries 56.6% citrulline and 43.4% malic acid at theory. Commercial material is also sold as 2:1, and that label can mean 72.3% citrulline on a molar basis or 66.7% on a mass basis, so the ratio and its basis belong in the name. The free amino acid is a third product, not a grade of the salt.

In one line

A citrulline malate grade is defined by the ratio and its basis before it is defined by mesh or purity: the 1:1 molar salt carries about 56.6% citrulline, and a 2:1 label can mean 72.3% or 66.7%.

The name carries the grade

Citrulline malate is not one specification. The name covers a family of citrulline–malate combinations, and the ratio decides how much citrulline a gram of powder contains. A 1:1 and a 2:1 lot can both pass 98.0–101.0% assay while delivering different amino-acid loads, because the assay describes the salt and the label may describe the citrulline.

The catalog sheet is written for the 1:1 molar salt: assay 98.0–101.0% by HPLC, citrulline 55.0–60.0%, loss on drying ≤1.0% and ≥95% through 80 mesh. A 2:1 powder at roughly 72% citrulline cannot meet that citrulline range, so the sheet does not transfer to it.

An order that names only “citrulline malate” has left the ratio open. The free amino acid is a separate ingredient with its own assay basis and rotation, not a finer mesh of the same product.

Four readings of the same name

A ratio is only meaningful with its basis. Four readings circulate in commercial material: 1:1 molar, 1:1 by mass, 2:1 molar and 2:1 by mass. The first is the material on this sheet.

Citrulline content by form and ratio
FormCitrulline by massPowder for 3 g citrulline5% solutionPanel name
L-citrulline100%3.0 gpH 5.0–7.0L-citrulline
1:1 molar (this catalog)56.6%5.3 gAcidicL-citrulline malate 1:1
2:1 molar72.3%4.2 gAcidicL-citrulline malate 2:1
2:1 by mass66.7%4.5 gAcidicL-citrulline malate 2:1, basis stated
1:1 by mass50.0%6.0 gAcidicNot this catalog

The last row is the trap. A 1:1 blend by mass is half citrulline and half malic acid, which falls below the 55.0–60.0% catalog range. A supplier quoting “1:1” at 50% is describing a different powder, so the purchase order and the certificate should both say “molar”.

2:1 is the other commercial grade. It carries more citrulline and less malic acid per gram, so it needs less powder for a given citrulline figure and is less sour than the 1:1 material. It is still not the free amino acid: a little over a quarter of the powder is malate.

Water, flow and sourness

Both grades are white to off-white powders, and the catalog 1:1 is ≥95% through 80 mesh. Malic acid takes up water, and the 1:1 material holds more of it per gram than the 2:1, so the 1:1 cakes first in an open room and needs the tighter in-use discipline. A granulated version improves flow and reduces dust without changing the ratio, but it changes the sieve line and therefore the specification.

Sourness follows the same proportion. The malate solution is acidic, while a 5% solution of the free amino acid sits at pH 5.0–7.0. Per gram of citrulline, the 1:1 powder brings about 0.77 g of malic acid and the 2:1 about 0.38 g. In a flavoured drink that is a design input; in a capsule it is a compatibility question for the shell and for any acid-sensitive partner in the blend.

From label figure to powder weight

Begin with what the panel declares. If it declares 3 g of citrulline, the weights are 5.3 g of the 1:1 salt, 4.2 g of the 72.3% grade or 3.0 g of the free amino acid. If it declares 6 g of citrulline malate 1:1, the citrulline delivered is 6 × 0.566 = 3.4 g.

Fill weight follows the same arithmetic. A 500 mg capsule holds 283 mg of citrulline as the 1:1 salt; the free amino acid would put the full 500 mg in the same capsule. A stick pack or drink mix has room for a multi-gram serving, so the acid becomes a flavour decision rather than a fill constraint.

These are conversions between a label figure and a powder weight, not advice about how much anyone should take.

Clauses for a 1:1 purchase

  • Name the material as L-citrulline malate 1:1 (molar), CAS 54940-24-2, with the formula C6H13N3O3·C4H6O5.
  • Set the assay at 98.0–101.0% by HPLC and state whether it is as-is or dried.
  • Set citrulline at 55.0–60.0% and add a calculated molar ratio of 0.95–1.05.
  • Keep loss on drying at ≤1.0% and particle size at ≥95% through 80 mesh.
  • Carry the metal and microbiology limits from the catalog sheet.
  • Declare the malate source and confirm the label name and market before the order.

Write “1:1 molar”. The unqualified form has a second reading, 50% citrulline, which is a different product; the same caution applies to a 2:1 order.

When the free amino acid wins

Choose L-citrulline when the panel already says L-citrulline, when the capsule is at its fill limit, when the blend contains a carbonate or another acid-sensitive component, or when the specification is built around rotation and titration. Choose the malate when the label names it, when the serving is a flavoured powder, and when the acid is part of the design.

A switch is not a weigh-up substitution. It needs a new specification, a new fill weight and a new label; leaving the old panel in place while the powder changes creates a mismatch that a label check will catch, usually after the packaging has been printed.

The product hub carries the catalog sheet. The level-four comparison takes the ratio, the acidity and the label further; the L-citrulline grade page describes the free amino acid's alternatives; the methods library covers the assays.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation