04 MOQ & ordering

L-citrulline malate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · L-Citrulline Malate

On this page
  1. The 1 kg pack and why it exists
  2. What the pouch and the drum hold
  3. From confirmation to dispatch
  4. The six lines a quotation must carry
  5. Qualifying a lot from a 1 kg pack
  6. What the quality agreement fixes

The minimum order for L-citrulline malate 1:1 is 1 kg, packed in a foil pouch; production volumes move in 25 kg fiber drums. Standard lead time is 1–7 days from confirmation. To quote firmly, we need the ratio and its basis, the assay and citrulline limits, the pack, the destination and Incoterm, the document set and the market where the powder will be sold.

In one line

One kilogram is the minimum because it is the smallest pack that can be sampled, tested for the ratio and traced as a lot.

The 1 kg pack and why it exists

A kilogram is a working quantity. It covers a bench trial, a retained sample and an outside check of both the citrulline and the malate figures, and it still ships as a parcel rather than a pallet. That combination is the reason the pack exists; it is not a volume threshold invented to move a drum.

Anything smaller is a repack cut from a larger lot. It can be done, but the new unit carries its own handling record and its code no longer points at the original pack, so the ratio evidence becomes harder to follow. The 25 kg drum is the production unit: fewer handlings per kilogram, at the cost of committed stock and a longer storage period.

What the pouch and the drum hold

Packs offered for L-citrulline malate 1:1
PackNet weightWhat it is forWhat to check
Foil pouch1 kgTrial, retained sample, small batchSeal, lot code, in-use closure
Fiber drum25 kgProductionInner liner, drum and liner lot codes
Granulated powderOn requestFlow and dust controlNew particle-size line on the specification

The catalog powder is ≥95% through 80 mesh. Granulation changes how the powder moves and how much dust it makes, but it does not change the ratio; it does change the sieve result, so the certificate needs the new line. Tell us the mesh before the quotation, because a non-standard finish can add a step to the schedule.

From confirmation to dispatch

The 1–7 day figure starts at order confirmation and ends at dispatch. Picking, document preparation and handover to the carrier sit inside it; transit, customs clearance and the customer's own quality release sit outside. A granulated grade or a non-standard pack gets its own date, and the quotation should say so in a separate line.

Ask for the dispatch date rather than the range. A pouch usually travels as a parcel and a drum on a pallet, which changes the freight booking; the Incoterm then decides who arranges carriage and who clears entry. The COA and the rest of the lot file should be in the same shipment as the pack, not sent after it lands.

The six lines a quotation must carry

  1. Product, ratio and CAS. L-Citrulline malate 1:1 (molar), CAS 54940-24-2; a 2:1 request must state whether the ratio is molar or by mass.
  2. Specification. Assay and basis, L-citrulline 55.0–60.0%, the ratio limit, loss on drying ≤1.0%, 80 mesh, metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant.
  4. Destination and Incoterm. The country, the port or address, and the trade term.
  5. Documents. COA, TDS, SDS, allergen and GMO statements, origin, residual-solvent statement and any market-specific declaration.
  6. Use and market. Supplement, food or another use, and the country where the finished product will be sold.

Two quotations cannot be compared if one names the ratio and the other leaves it out, or if one is written for a market the other has not checked. Commercial terms belong on the quotation, not in this document.

Qualifying a lot from a 1 kg pack

Use the pouch as the qualification lot. Run HPLC identity and assay, the citrulline and malate figures, loss on drying, the metal panel and microbiology before scaling up, and keep a retained sample from the same pouch. The pouch code, the COA code and the quotation reference should agree; a sample that cannot be tied to a lot is a demonstration, not a qualification.

A trial that needs less than a kilogram is a repack, and it should be documented as one. Ask for the split in writing, keep the split code with the trial results, and do not present it as the catalog pouch when the production order is placed.

What the quality agreement fixes

Put the commercial and quality terms in one place: pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period, change control and the referee laboratory. These are easier to agree before the first production order than after a disagreement.

If a lot falls outside the specification, the evidence is the retained sample and a joint re-test against the named method. The agreement should name the laboratory both sides accept and say who carries its fee; a return argued from a photograph of the drum is difficult for either side to settle.

The product hub holds the catalog specification; release tests are listed on the COA page; market files are on the compliance page; the MOQ glossary entry defines the term; shipping documents are covered by the logistics page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation