Acetyl-L-carnitine vs L-carnitine: the acetyl group and the label
L-carnitine and acetyl-L-carnitine are not the same ingredient at two strengths. The acetyl group adds 42.04 g/mol to the carnitine molecule, makes an ester bond that can hydrolyse, changes the CAS number and the label name, and lowers the carnitine content per gram from 1.00 g to 0.79 g as the free base or 0.67 g as the hydrochloride. A formula built on one cannot be relabelled as the other by changing the number on the panel.
The acetyl group makes acetyl-L-carnitine a different molecule with its own CAS number, assay and label; it is not an L-carnitine dose under another name.
The acetyl group changes the molecule
L-carnitine is a zwitterion with a hydroxyl group. Acetylation converts that hydroxyl into an ester, and the product is a different substance with its own identity, assay and label. The acetyl group is not a coating or a dilution; it is part of the molecule, and an assay of the ester is not an assay of carnitine.
| Property | L-carnitine | Acetyl-L-carnitine | Acetyl-L-carnitine HCl |
|---|---|---|---|
| CAS number | 541-15-1 | 3040-38-8 | 5080-50-2 |
| Formula | C7H15NO3 | C9H17NO4 | C9H18ClNO4 |
| Molecular weight | 161.20 | 203.24 | 239.70 |
| Carnitine per gram | 1.00 g | 0.79 g | 0.67 g |
| Acetyl group | None | 42.04 g/mol | 42.04 g/mol |
| Chloride | None | None | 14.79% by mass |
| Label name | L-carnitine | Acetyl-L-carnitine | Acetyl-L-carnitine hydrochloride |
The carnitine figures are stoichiometry: 161.20 ÷ 203.24 = 0.793 for the free base and 161.20 ÷ 239.70 = 0.673 for the hydrochloride. They describe the pure molecule, not a certificate result, which still depends on the assay and its basis.
The conversion between the labels
The molecular weights give the conversion. One gram of carnitine equals 203.24 ÷ 161.20 = 1.26 g of acetyl-L-carnitine free base or 239.70 ÷ 161.20 = 1.49 g of the hydrochloride. A formula that declares 500 mg of carnitine therefore needs about 631 mg of the free base or 744 mg of the hydrochloride.
The reverse arithmetic is the one that catches label reviews. A 500 mg dose of acetyl-L-carnitine hydrochloride delivers about 336 mg of carnitine; 500 mg of the free base delivers about 397 mg. If the panel declares the ester, the number is the salt weight and the carnitine figure is supporting information; if it declares carnitine, the powder weight is higher. The two cannot share one number.
The assay basis is a second correction. A 99.0% assay on the dried basis is not 99.0% of the powder as weighed, and it is not 99.0% carnitine. Convert with the loss on drying first, then with the molecular-weight factor if the label uses the other basis. Those are label arithmetic, not dose advice.
The ester bond changes the stability
L-carnitine is chemically robust as a dry solid; its practical weakness is water uptake. Acetyl-L-carnitine has the same hygroscopic problem and a second one: hydrolysis to carnitine and acetate, faster with water, heat and alkaline pH. A beverage made with acetyl-L-carnitine is a stability study in its own right; the same beverage made with L-carnitine is mainly a preservation study.
Hydrolysis also changes the label claim over time. If the panel declares 500 mg of acetyl-L-carnitine, a lot that loses part of the ester delivers less than the declared amount; the free carnitine rises and the assay of intact ester falls. An overage is a label and stability decision, not a repair for a pack that lets water in.
In the dry pack, both forms need a moisture barrier. The hydrochloride is acidic in solution, while the free base has no added chloride but still carries the ester. The pack and the matrix, not the parent molecule, decide which form lasts longer in a given formula.
What the label has to say
The label name follows the molecule. In the EU the ingredient declaration and the national supplement rules require the name of the form in the pack; in the US the Supplement Facts panel names the dietary ingredient. “L-carnitine” does not cover acetyl-L-carnitine, and “acetyl-L-carnitine” does not cover the hydrochloride where the salt name is required.
A formula that declares L-carnitine and uses acetyl-L-carnitine has a labelling problem even if the carnitine figure matches, because the ingredient is a different substance. A formula that declares the hydrochloride and uses the free base has the same problem in reverse. The specification, the certificate and the panel should use one name.
Quantity is the second label question. The panel can declare the ester or the carnitine, but it must say which; a number without a basis is not a label.
Two ingredients, two regulatory files
The two ingredients have separate files. In the EU, L-carnitine has a documented pre-1997 history, and the novel-food catalogue entry for acetyl-L-carnitine is a separate entry; the catalogue check, the national level rule and the label review are done per ingredient. In the US, both are marketed as dietary ingredients, but the supplement file for one does not automatically cover the other.
Do not carry a claim from one to the other. As of this review the EU register carries no authorised health claim for acetyl-L-carnitine; a claim written for L-carnitine is a separate entry and does not transfer. The buyer's regulatory team confirms the route for the exact form and market.
Acetyl-L-carnitine is not a stronger L-carnitine; it is a different molecule. The regulatory file should say that in the same words as the label.
When to choose which
Choose L-carnitine when the label names L-carnitine, when the formula needs the highest carnitine per gram, or when the matrix is alkaline and an ester would hydrolyse. Choose acetyl-L-carnitine when the label names the acetyl form and the formula and stability work have been done on that molecule.
Neither is a drop-in for the other. A switch changes the mass, the assay, the stability and the regulatory citation, and it needs a new specification, a new label and a new stability study.
The catalog specification for the acetyl form is on the acetyl-L-carnitine product page; the parent form is on the L-carnitine page; the release tests are on the COA page; the identity evidence is on the identity page; the market file is on the compliance page. The analytical methods are collected under methods, and the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation