04 MOQ & ordering

Vitamin K2 MK-4: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Vitamin K2 MK-4

On this page
  1. Why the minimum is 1 kg
  2. The standard packs
  3. Lead time and what moves it
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

The minimum order for vitamin K2 MK-4 is a 1 kg foil pouch, with a 25 kg lined fiber drum as the production pack. The standard 98% powder is quoted at 1–7 days from a released lot; the count starts once the specification and the order match. A quotation needs the grade, the quantity and pack, the destination and Incoterm, the documents, the intended market and any additional test.

In one line

The 1 kg pouch is the smallest unit that carries its own lot code, certificate and retained sample, and at a 45 mg dose it is still a real trial quantity.

Why the minimum is 1 kg

One kilogram of the 98% powder carries about 980 g of menaquinone-4, or 980,000 mg. At a 45 mg dose that is roughly 21,700 doses before overage, at 15 mg about 65,000, and at 5 mg close to 196,000. That is a pilot batch or a first production run, not a sample tube, which is why 1 kg is a working unit for this product rather than an arbitrary threshold.

The comparison with the sister product is useful. A 1 kg pouch of a 1% MK-7 powder carries about 10 g of MK-7, which is roughly 100,000 doses at 100 µg. The pack is the same and the dose count is not, because the MK-4 dose is measured in milligrams. A buyer who is used to microgram-dose materials should check the dose count before assuming that 1 kg is a large quantity.

Under 1 kg, the usual practice is to split a larger lot and repack it. Repacking adds a handling step, breaks the link to the original pack and weakens traceability, while the chemistry stays the same. The minimum is a traceability unit, not a volume incentive.

The standard packs

Packs for vitamin K2 MK-4
PackNet contentTypical useHandling
Foil pouch1 kgSample, qualification, pilot batchReseal between uses; keep cool, dry and dark
Fiber drum with liner25 kgProduction batchKeep the liner closed; store away from light and heat
Oil solutionAgreedSoftgel or drop fillDeclared concentration and carrier oil; protect from light
Custom packAgreedLine trial or a specific filling lineAgreed with the order; check the seal and the closure

The label on the pack belongs to the lot: product, grade, lot code, net content and storage statement. That code ties the pack to its certificate and to the retained sample; without it, the certificate describes a product rather than a lot. The pouch is not a dispensing pack for a long campaign, and the drum is not a storage silo: both should be closed after each withdrawal.

Lead time and what moves it

The standard powder is quoted at 1–7 days. The window covers release, packing and dispatch, and stops at the handover to the carrier; transit is outside it. A custom particle size, an oil solution, a non-standard pack or a market-specific document set moves the date, and the offer should say so on its own line.

Get the dispatch date as well as the lead time. The drum usually moves on a pallet, the pouch as a parcel, and the Incoterm decides who books the freight and who handles clearance. Because the material is sensitive to light and heat, the transit instruction should be written into the order.

What a quotation needs

Details that make a quotation usable
DetailWhy it changes the offer
Product and gradeThe isolated powder, an oil solution and a dilution are different materials
Quantity and packThe 1 kg pouch and the 25 kg drum are different units and handling
Destination and IncotermFreight, documents and responsibility change with the route
DocumentsCOA, TDS, SDS, allergen, GMO and origin statements are separate items
Label market and doseThe market decides the name, the units and the route
Additional testsA menadione limit or a melting range is a different release protocol

With these six details an enquiry can be answered as a specific offer. An enquiry that says only “vitamin K2” will produce a range, because the supplier has to guess which menaquinone, which grade and which market file the buyer means.

The sample is a lot, not a demonstration

Qualification starts from the 1 kg pack: run identity, assay, loss on drying and microbiology before scaling up, and keep back a sample from the same pack. The lot code should read the same on the sample, the COA and the offer. A sample with no lot behind it demonstrates a product; it does not qualify a batch.

Ask for the sample in the same pack material as the commercial pack, because a clear bag says nothing about how the foil pouch behaves. For MK-4, also record how the sample was stored: a pouch that spent a week in a warm vehicle may arrive caked, and that is a handling event rather than a specification failure.

Terms to settle before the first order

Commercial terms, the Incoterm, the pack, the lead time and the documents are all part of the offer. Quality terms sit next to the commercial ones: which specification revision applies, a COA for every lot, the retained sample, the retest period and the route for a change. It is easier to agree the quality terms before the first production order than after the first dispute.

Replacements and returns are governed by the offer and the quality agreement. A failed lot is resolved on the retained sample with a joint re-test, not from a photograph. Settle in advance who commissions the referee test and which laboratory both sides accept.

Before the first order, read the product page for the specification and the COA page for the release lines. The compliance page covers the market file, and the quality page explains how a lot is released.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation