02.1 K1 vs K2

Vitamin K1 vs vitamin K2: two molecules, two labels

Technical document 02.1 · Reviewed 2026-11-19 · Vitamin K1

On this page
  1. One molecule and one family
  2. The two vitamins side by side
  3. Micrograms are not the same number of molecules
  4. Label naming and the form
  5. Where each comes from
  6. When to choose which

Vitamin K1 is phylloquinone, CAS 84-80-0, C31H46O2, molecular weight 450.70. Vitamin K2 is not one substance but a family of menaquinones, of which MK-4 (444.66) and MK-7 (649.02) are the commercial members. The structural difference is the side chain, and it reaches the label: the two are separate ingredients with separate names, dose arithmetic and documents. A label that says only “vitamin K” has not chosen either.

In one line

Vitamin K1 is a single phytonadione molecule; vitamin K2 is a family of menaquinones, and a label that says only vitamin K has named neither.

One molecule and one family

Both vitamins share the same head group: a 2-methyl-1,4-naphthoquinone ring. The difference sits at position 3, where the side chain is attached. In vitamin K1 that chain is a phytyl group, 20 carbons long and saturated apart from one double bond. In vitamin K2 the chain is a polyisoprenyl group: repeating five-carbon units, each carrying a double bond, with the count written into the name. MK-4 has four units, MK-7 has seven, and the series continues upward.

That single difference produces two very different materials. The phytyl chain is why vitamin K1 is a viscous oil at room temperature and why it has a cis and a trans isomer at one specific bond. The polyisoprenyl chains of vitamin K2 give a series of crystalline solids whose molecular weight and lipophilicity change with every added unit. MK-4 and MK-7 are not two grades of one substance; they are two members of a homologous series, and the label has to say which one is in the product.

The two vitamins side by side

Vitamin K1 against vitamin K2
PropertyVitamin K1Vitamin K2
Common namePhylloquinone, phytonadioneMenaquinones, MK-n
CAS number84-80-0MK-4 863-61-6; MK-7 2124-57-4
FormulaC31H46O2MK-4 C31H40O2; MK-7 C46H64O2
Molecular weight450.70MK-4 444.66; MK-7 649.02
Side chainPhytyl, 20 carbons, one double bondPolyisoprenyl, 5n carbons, n double bonds
AppearanceClear yellow to amber viscous oilMK-4 yellow crystalline; MK-7 pale yellow powder
Label nameVitamin K (as phytonadione)Vitamin K (as menaquinone-7), or menaquinone-4
Dosage-form fitOil fill, oil blend, emulsionCapsule, tablet, oil suspension

The table explains why the two are rarely interchangeable in a factory: one is an oil that has to be diluted before a softgel can hold a microgram dose; the others are solids that can be weighed into a capsule or a tablet blend. The 198-unit gap between K1 and MK-7 is also the gap in the number of molecules a microgram delivers.

Micrograms are not the same number of molecules

Doses for both vitamins are declared in micrograms, and a microgram is a mass, not an amount of substance. Divide by the molecular weight and the picture changes. A 100 µg dose of vitamin K1 is 100 ÷ 450.70 = 0.222 µmol. The same 100 µg of MK-7 is 100 ÷ 649.02 = 0.154 µmol, roughly 31% fewer molecules. MK-4, at 444.66, lands close to K1 at 0.225 µmol, which shows that molar mass alone does not make two materials interchangeable.

The label arithmetic runs on the same digits. A 100 µg dose is 133% of the EU nutrient reference value of 75 µg for vitamin K, and 83% of the US Daily Value of 120 µg, calculated as of this review. The percentage counts the vitamin K activity declared, whichever permitted form supplies it, so a MK-7 product and a phytonadione product can show the same percentage while carrying different molecules. Those percentages are label arithmetic, not dose recommendations.

The practical consequence is that a formula cannot be switched from one vitamin to the other by keeping the microgram figure. The mass changes, the molar amount changes, the carrier changes and the label declaration changes, and each of those is a separate decision.

Label naming and the form

In the European Union, Directive 2002/46/EC sets a positive list of vitamin and mineral substances and of the forms permitted in food supplements, and the vitamin K entry is form-specific. The label names the vitamin and the form; “vitamin K2” on its own is a family name, not an ingredient name, and the menaquinone has to be identified. The percentage of the nutrient reference value is calculated against 75 µg per day, as of this review. The authorised claim wording is fixed by Regulation (EU) No 432/2012 and is tied to the product being a source of the vitamin.

US labelling puts the form in brackets after the nutrient name on the Supplement Facts panel, for example “Vitamin K (as phytonadione)” or “Vitamin K (as menaquinone-7)”. The Daily Value for the percentage is 120 µg, as of this review. A panel that says only “vitamin K2” leaves the ingredient unidentified, and the buyer's reviewer will ask for the form.

Great Britain keeps its own list under the Food Supplements (England) Regulations 2003 and the parallel instruments in Wales and Scotland, while Northern Ireland follows the EU framework. The form is checked against the list that applies to the destination, not the one in force when the artwork was written.

Where each comes from

Vitamin K1 is made by condensing menadione with isophytol or a phytyl halide and purifying the product. The molecule is the same as the one in green leaves, so a “natural” claim cannot rest on the structure; if the source matters to the brand, the origin of the phytol needs its own evidence and statement. The synthesis leaves a cis fraction that purification has to reduce, which is why the isomer figure belongs on the certificate.

Vitamin K2 arrives by two routes. MK-4 is generally produced synthetically, while MK-7 is commonly obtained by fermentation and can also be made synthetically; the route affects the isomer profile and the residual-solvent statement, and it is the first question a buyer asks about a MK-7 lot. For both vitamins the origin statement, the solvent statement and the isomer statement belong in the file, and a supplier that cannot name the route has not described the material.

When to choose which

Choose vitamin K1 when the dosage form is an oil fill, an oil blend or an emulsion, and when the label is to declare phytonadione. It is a concentrate that a fill line dilutes, and its specification is written around the oil: assay, refractive index, isomer figure. The vitamin K1 product page carries that specification, and the grades page explains the carrier and blend options.

Choose a menaquinone when the formula needs a solid at a small dose, or when the brand's positioning calls for MK-7 or MK-4. The vitamin K2 MK-7 page covers that material and its all-trans requirement. Whichever is chosen, the switch is a change of ingredient, not a change of dose: it needs a new specification, a new label and a check of the destination list.

The compliance page sets out the frameworks behind the label, the identity page explains the tests that tell the forms apart, the methods library describes the chromatography, and the quality page covers the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation