02 Grade comparison

Vitamin K1 grades: the neat oil, the carrier powder and the diluted blend

Technical document 02 · Reviewed 2026-11-19 · Vitamin K1

On this page
  1. Why the catalog form is an oil
  2. The three grades side by side
  3. Refractive index, viscosity and solubility
  4. Dose arithmetic and the fill
  5. What to write into the specification
  6. When the oil is the wrong choice

Vitamin K1 is sold as phytonadione oil, a viscous concentrate specified at 97.0–103.0% by HPLC with a refractive index window of 1.525–1.528. The carrier powder and the diluted oil blend are separate specifications, and the dose arithmetic, the certificate and the label follow the form. Choose the neat oil when the next step is a blend or an oil fill; choose a carrier grade when the process needs a solid.

In one line

Vitamin K1 arrives as a concentrate oil; the powder on a carrier and the diluted blend are different specifications, and the dose arithmetic follows the carrier.

Why the catalog form is an oil

Phytonadione carries a phytyl chain, a saturated 20-carbon tail with one double bond, attached to a methylnaphthoquinone head. That tail is what makes the molecule fat-soluble, and it is also what keeps the material liquid at room temperature: it does not build a lattice that would flow as a powder. A solid grade therefore has to be built rather than extracted, by adsorbing the oil onto a carrier or dispersing it in a matrix, and that carrier becomes part of the specification.

That is why the catalog record lists the oil first. A buyer who asks for “vitamin K1 powder” is asking for a formulated grade, with a carrier, a declared content and a particle-size line, not for phytonadione as such. The distinction matters at the quotation stage, because the two are not priced, labelled or tested in the same way.

The oil is also the form the monographs describe: assay, refractive index and related substances are oil tests, while a carrier grade needs a content assay that names the carrier and a matrix-appropriate method.

The three grades side by side

Neat oil, carrier powder and diluted blend · vitamin K1
PropertyNeat oil (catalog)Powder on carrierDiluted oil blend
FormClear yellow to amber viscous oilFree-flowing powder or granuleOil solution in a carrier oil
Assay figure97.0–103.0% phytonadione by HPLCDeclared content of vitamin K1 on the carrierDeclared content of vitamin K1 in the blend
What you weighThe oil itself; about 0.1 mg for a 100 µg doseThe declared content divisorThe declared content divisor
Typical useSoftgel and oil-blend manufactureTablets, capsules, stick packsFill-ready softgel oil
Label declarationVitamin K (as phytonadione)Vitamin K (as phytonadione) plus the carrierVitamin K (as phytonadione) plus the carrier oil
Certificate coversThe oilThe finished powderThe finished blend

Only the first column is the catalog item. The other two are built from it, each with its own specification, certificate and label consequence; a quotation that offers “K1 powder” without naming the carrier and the declared content has not described a grade.

Refractive index, viscosity and solubility

The refractive index window of 1.525–1.528 is a practical filter because a triglyceride carrier oil sits far lower, near 1.47. A value below the window is direct evidence that the neat material has been blended, and a value inside it is a consistency check across lots. The measurement is temperature-dependent, so the temperature belongs on the record.

The oil is viscous at room temperature. It pours slowly, clings to glass and traps air when it is stirred, so a fill line warms it to make it flow. Warming shortens the exposure window before the oil sees light and air, and it belongs in a closed, dark vessel.

Solubility follows the structure: practically insoluble in water, soluble in fats, oils and organic solvents. That profile decides the dosage form. An aqueous drink is the wrong place for the neat oil unless it is emulsified, and an emulsion is a different product with a different stability file. A dry blend needs a carrier that holds the oil without releasing it at warm warehouse temperatures.

Dose arithmetic and the fill

Vitamin K doses are labelled in micrograms. One milligram is 1,000 µg, so a 100 µg dose is 0.1 mg of phytonadione, and at the catalog assay that is about 0.1 mg of the oil. A 500 mg softgel fill therefore carries the vitamin at roughly 0.02% of its mass; the rest is carrier oil, and the fill weight, the assay and the label have to agree on the micrograms.

The percentage of the reference value depends on the market. Against the EU nutrient reference value of 75 µg, 100 µg is 133%; against the US Daily Value of 120 µg it is 83%, calculated as of this review. Those figures are label arithmetic, not a dose recommendation; the finished-product dose is the brand's decision and belongs in the nutrition file.

A carrier grade changes the arithmetic again, because the declared content, not 100%, is the divisor. If a grade declares 1% vitamin K1, a 100 µg dose sits in 10 mg of powder; at 5% it sits in 2 mg. Ask for the declared content and its basis before computing a fill weight, and check that the carrier is permitted and declared in the destination market.

An overage is sometimes used to cover loss over shelf life. It belongs to the finished-product stability file and to the label, not to the ingredient specification; no overage compensates for a pack that lets light through.

What to write into the specification

  • “Vitamin K1 (phytonadione, phylloquinone), CAS 84-80-0, C31H46O2.”
  • “Assay 97.0–103.0% by HPLC, on the oil as received.”
  • “Identification by HPLC retention plus the UV spectrum against a phytonadione standard.”
  • “Refractive index 1.525–1.528; report the temperature of the measurement.”
  • “trans-isomer share and cis-isomer limit reported per lot.”
  • “Heavy metals and microbiology as listed; pack 1 kg or 5 kg amber bottle.”
  • “For a carrier grade: carrier identity, declared content, particle size and the label name.”

We supply the neat oil. A carrier grade or a blend is a separate purchase with its own specification, and it should not replace the oil without written change control and a fresh label review.

When the oil is the wrong choice

If the dosage form is a direct-compression tablet, a dry stick pack or a capsule filled by a powder dosator, the oil needs a carrier before it can run. If the plant has no oil handling, no warmed lines and no nitrogen, a fill-ready blend is the more realistic purchase than a drum of concentrate. If the formula is aqueous, the oil has to be emulsified, and the emulsion is a development project rather than a substitution.

The reverse is also true: a buyer who needs the neat oil should not accept a carrier powder and adjust the number at the balance, because the carrier changes the mass, the label and the stability.

The catalog specification lives on the product hub. The level-four comparison places vitamin K1 against vitamin K2; the COA page shows how the oil is tested; the identity page gives the checks that separate the oil from a blend; the vitamin K2 MK-7 page covers the other K vitamin.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation