05 Compliance

The regulatory file for vitamin K1

Technical document 05 · Reviewed 2026-11-19 · Vitamin K1

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Limits and the finished-product calculation
  5. Label and claims
  6. The documents
  7. Checklist before the first order

Vitamin K1 is phytonadione, CAS 84-80-0, and the paperwork around it is built around three things: the form, the destination and the finished-product route. The buyer's regulatory team confirms that route for each market. What follows is a description of the frameworks, the limits and the evidence a file should contain, so that the specification and the pack can be read against the same rules. It is a sourcing reference, not a label and not legal advice.

In one line

On a label vitamin K is a family name; the file has to show that the form, the source and the wording are the ones the destination permits.

What the file contains

Four questions organise a regulatory file. Which material and which specification revision is being bought? Which lot is being released, and what does its certificate say? Which limits and label rules attach to the finished product? And what has to be re-checked if the source, the process or the pack changes? The certificate answers the lot question, the technical data sheet answers the specification question and the safety data sheet answers the handling question; the route question is left for the operator.

Two statements belong specifically to this product. The first covers isomerism: the certificate should give the trans share and a limit for the cis isomer, because a supplier who cannot state the geometry has not fully described the material. The second covers origin: phytonadione is made by synthesis rather than extracted from a plant, so any claim about plant-derived phytol needs evidence of its own. Residual solvents, allergens, GMO status, irradiation and animal-derived inputs complete the set, and each document should carry a version and a date.

European Union

Directive 2002/46/EC sets the positive list of vitamin and mineral substances and of the forms allowed in food supplements, and the vitamin K entry is written per form. Phylloquinone, the form sold here, is the name to check against the current consolidated text of Annex II. Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars: amount per portion, percentage of the nutrient reference value, and the mandatory warnings. The reference value for vitamin K is 75 µg a day, as of this review. Contaminants fall under Regulation (EU) 2023/915, and the operator placing the product on the market carries the general food law duties set by Regulation (EC) No 178/2002.

Two details decide the destination. National maximum levels and notification procedures for vitamins are not harmonised, so the member state matters as much as the union. And claim wording is fixed by Regulation (EU) No 432/2012, which leaves the label no room to improvise.

United States

For a supplement, the US file turns on the dietary ingredient and the Supplement Facts panel. Vitamin K is declared under that name with its form in brackets, for example “Vitamin K (as phytonadione)”, and the percentage is calculated against a Daily Value of 120 µg, as of this review. The supplier should be able to name the basis on which it regards the ingredient as a dietary ingredient and point to the evidence; the buyer then confirms that the basis fits the finished product and the claim.

Adding the vitamin to a conventional food is a different exercise, with a different basis and a different label. The intended use has to be settled before documents are collected, because the two routes do not share a paper trail.

Limits and the finished-product calculation

Contaminant limits apply to the finished product, not to the bottle alone. The oil is used in very small amounts per serving, which keeps its contribution low, but the sum still has to be worked out and kept on file.

Contaminant limits to check for the finished product
ParameterTypical supplement referenceEvidence the file should hold
Lead (Pb)3.0 mg/kg in the supplementThe lot figure, the method, the limit and the summed product calculation
Cadmium (Cd)1.0 mg/kg in the supplementThe lot figure and any category exception the product relies on
Mercury (Hg)0.10 mg/kg in the supplementThe lot figure and the method that produced it
Arsenic (As)No harmonised EU limit for supplements; the buyer sets oneThe agreed limit, the method and the lot figure

One calculation shows the scale. A softgel carrying 100 µg of vitamin K takes about 0.1 mg of oil, and even an oil sitting at the 3.0 mg/kg lead limit would contribute roughly 0.0003 µg to that softgel. The contaminant load of the finished product comes from its other ingredients. A carrier grade changes the arithmetic, because the powder mass per serving is much larger than the oil mass.

Label and claims

Nutrition and health claims sit under Regulation (EC) No 1924/2006 and the authorised list in Regulation (EU) No 432/2012. Vitamin K has entries in that list, each tied to a condition on the amount in the product; the source-of threshold is 15% of the 75 µg reference value, or 11.25 µg in the daily portion, as of this review. The wording is fixed, and the claim is reviewed apart from the certificate.

In the United States the nutrient-content thresholds are 10% of the Daily Value for “good source” and 20% for “high”, which is 12 µg and 24 µg against 120 µg. Claim file and certificate are separate documents, and a disease-related claim falls outside the framework in both markets. The brand's reviewer signs off the final words.

The documents

  • Specification naming the form and CAS number, with assay and method, refractive index and isomer lines.
  • Lot COA with the trans and cis figures and each heavy metal reported separately.
  • Technical data sheet and safety data sheet for the oil.
  • Residual-solvent statement for the synthesis, and the isomer statement.
  • Allergen, GMO, irradiation and animal-derived input statements.
  • Nutrition worksheet showing vitamin K per portion and the % NRV or % DV.

Checklist before the first order

  • Phytonadione is named on the specification, not the family name vitamin K.
  • The form matches the current permitted list for the destination.
  • The certificate carries the isomer figure and the refractive index, not only the assay.
  • The contaminant figures have been converted to the finished-product dose.
  • The label and the claim match the authorised wording for the market.
  • Source, process and pack sit under change control, with versioned documents.

Start with the product hub for the catalog specification, then the COA page for the lot certificate and the identity page for the analytical evidence. The level-four comparison explains the label difference between the two K vitamins; the quality page covers the release file; the regulatory notes carry the framework citations.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation