Vitamin K1 1% powder: MOQ, packaging and ordering
The MOQ for vitamin K1 1% powder is 1 kg, supplied as a 1 kg foil pouch; the bulk pack is a 25 kg fiber drum, and the standard pack ships in 1–7 days. One kilogram of a 1% powder carries about 10 g of phytonadione, so the smallest order is mostly carrier; a firm quotation needs the declared content and its basis, the carrier, the particle form, the quantity and pack, the destination and the documents.
One kilogram is the smallest pack that keeps a lot identity, and at 1% it carries only about 10 g of phytonadione; the rest is carrier that still has to be shipped, stored and declared.
Why the minimum is 1 kg
A 1 kg pack covers a bench trial, a retained sample and an independent assay, and it ships as a parcel rather than on a pallet. It is also the smallest unit that can carry a lot code through the chain, which matters more for a dilution than for a neat material: the vitamin is 1% of the mass, so a sampling error at the pouch becomes a large error in the vitamin.
At 1.0–1.1%, a 1 kg pouch holds 10–11 g of phytonadione. A 25 kg drum holds 250–275 g, and about 24.75 kg of carrier. The drum lowers the handling per kilogram of vitamin, but it commits inventory and a longer storage period for a moisture-sensitive powder.
Below 1 kg, the material is split from a larger lot and packed again. Handling increases, the original pack identity disappears and the retained sample becomes harder to tie to the lot. The 1 kg pouch is the commercial unit; anything smaller is a repack.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trials and small batches | Foil barrier; close the pouch after opening |
| Fiber drum | 25 kg | Production runs | Inner liner; lot code on drum and liner |
| Granulated powder | On request | Flow and dust control | Coarser particle; same declared content |
The catalog form is the 80 mesh powder: ≥95% through 80 mesh. Granulation is a separate packing option with its own particle profile; it is not a cosmetic choice, because it changes the flow, the dust and the way the powder blends. Say so before the quotation if the line needs a granule.
Lead time and dispatch
The standard pack is offered at 1–7 days from order confirmation. The window covers picking, document preparation and dispatch, not transit, customs clearance or the customer's own release. A granulated finish or a non-standard pack takes longer, and the quotation should say so.
Ask for the dispatch date, not only the range. A 1 kg pouch usually moves as a parcel; the 25 kg drum travels on a pallet, and the Incoterm decides who arranges freight and who clears entry. The COA and the technical data sheet should travel with the pack.
What a quotation needs
- Product and form. Vitamin K1 1% powder, phytonadione on a carrier, CAS 84-80-0.
- Declared content and basis. 1.0–1.1% by HPLC, stated as received or on the dried basis.
- Carrier and particle form. Carrier identity, any antioxidant, and 80 mesh or granulated.
- Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant.
- Destination and Incoterm. The country, the port or address, and the trade term.
- Documents and intended use. COA, specification, SDS, carrier statements, and the market.
A quotation that names the potency but not the carrier is incomplete: the carrier is 99% of what will be shipped, and it brings its own documentation and label consequences. The same powder can suit one destination and fail the carrier check for another. Commercial terms are not published here; they appear on the quotation.
A sample that carries a lot code
The 1 kg pouch is the pack a new buyer qualifies. Test the assay in duplicate, loss on drying, the sieve result, the microbiology and the carrier identity before scaling, and keep a retained sample from the same pouch. Make sure one lot code appears on the sample, the COA and the quotation.
Sample more than one position in the pouch if the powder will be used at a low inclusion. A 1% powder can pass a composite assay and still segregate in transit; a top-and-bottom check is a cheap way to see whether the blend is uniform. If the sample cannot be traced back to a lot, it is a demonstration rather than a qualification.
A trial that needs less than a kilogram is split from a larger lot; it is a repack, not the catalog pouch, and it carries its own handling record rather than the 1 kg foil pack's identity.
Terms to settle before the first order
Settle the commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, a COA for each lot, the retained sample, the retest period and the route for a change. A carrier change counts as a specification change, not a purchasing detail, and needs written approval before the next lot is blended.
When a lot misses the agreed specification, the dispute goes to the retained sample and a joint re-test against the named method. The agreement should name who pays for the referee laboratory and which laboratory both sides accept. Colour alone is a weak basis for a return, because the appearance window is broad.
The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the vitamin K1 page covers the parent oil; the methods library describes the assay; the quality page carries the release file; the MOQ glossary entry defines the term; the logistics page covers shipping and documents.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation